Search results for: 'state'

The Schneider Electric PC-A984-141 is a Modicon 984 series PLC processor module designed for industrial automation and control applications. It operates on 24 VDC, provides 2 MB memory capacity, supports up to 16,384 discrete I/O points, and includes communication ports, LED status indicators, and battery-backed memory.

Wohler VIS 750 is a complete HD inspection camera system in a clean, portable trolley. Includes a 7" monitor, an HD pan & tilt camera head with motorized focus, and a 130’ or 200’ push rod, built for long pipe runs and cleaner transport.

Kanson Electronics 1010-1-J-2 off-delay timer relay delivers adjustable 0.5 to 50.0 second timing with 115V 50/60Hz operation and 10 amp output switching for industrial control circuits.

The ABB OHDI-01 is a 115/230 VAC digital input module designed for use with ABB ACS550, ACH550, and ACS800 drives. It converts high-voltage digital input signals to 24 VDC drive inputs and supports up to six 115 VAC inputs or three 230 VAC inputs.

Turck BI10-G30SK-RZ3X2 inductive proximity sensor with 10 mm rated switching distance. M30 threaded, flush-mount metal housing with terminal chamber connection. Supports 20–250 VAC and 10–300 VDC operation with 2-wire NC output for industrial metal detection.

Fluke 820-2 LED Stroboscope enables non-contact rotational speed diagnostics with high-intensity LED output, quartz accuracy, and sharp stop-motion imaging.

Fluke PRV240FS provides a safe 240 V AC/DC source to verify FieldSense testers, multimeters, and clamp meters before and after live measurements.

Fluke FEV100/TY1 & TSL kit tests Type 1 and Tesla AC EV chargers with EV simulation, GFCI checks, grounding pre-tests, and full EVSE safety verification.

Amperite 115C60 thermal time delay relay delivers fixed 60-second Delay on Break control with 115V AC/DC input, SPST-NC contacts, and a 3A resistive rating.

KATKO KU 380N load break switch delivers 3-pole isolation and switching up to 80A at 690V AC-22, supporting reliable control and disconnection of electrical loads in industrial power systems.

Schneider Electric Telemecanique LC1 D09 10 is a 3-pole magnetic contactor for AC motor control and circuit switching, with an integrated 1 NO auxiliary contact and motor-starting capability up to 4 kW at 400V.

SOR 4N3-KK4-N1-C1A-ZZ pressure switch delivers adjustable 2-25 PSI switching for industrial pressure control, with 750 PSI over range and 1000 PSI proof pressure for monitored process applications.

Emerson DeltaV KJ3001X1-BD1 discrete input module for 120 VAC dry contact monitoring. This 8-channel module provides front-panel status indication and installs on DeltaV I/O hardware.

Sprecher + Schuh CS7E-31E control relay with attached CS7-PV auxiliary contact block. Rated for up to 690V AC, this 4-pole industrial control relay is used for switching control circuits in panel and machine control applications.

The Phoenix Contact PSR-SCF-24UC/URM/2x21 is a safety coupling relay designed for safe switch-off applications in industrial control systems. It features two force-guided changeover contacts, 24 V AC/DC supply voltage, and supports safety category 1, PL c, and SIL 1 applications.

Allen-Bradley 193-EPD is an E1 Plus separate mounting adapter that enables DIN rail or panel installation of compatible electronic overload relays, improving control panel layout flexibility and thermal performance.

Allen-Bradley 100S-C72DJ14C safety contactor delivers 72A IEC switching with mechanically linked contacts and a 24V DC diode-suppressed coil, providing reliable feedback for safety-related control circuits.

Allen-Bradley 1334-MOD-W3 run/fault contact mod kit adds isolated relay outputs for remote drive status monitoring on Bulletin 1334 and 1335 AC drives, supporting external control and annunciation systems.

Fluke CertiFiber Pro CFP-Q-ADD Quad OLTS Add-On Kit – Expand your CertiFiber Pro setup with dual Quad OLTS modules, multimode & single-mode TRC kits, adapters, and hard carry case. Enables Tier-1 fiber loss, length & polarity testing with full reference cords included.

The Autel Robotics EVO II Car Charger is a fast and reliable charging solution for your drone and remote controller on the go. Charge in just 90 minutes and travel with peace of mind.

Allen Bradley 700S-CFB440KDC Safety Relay: Reliable 110V industrial control relay. Built for precision, durability, and seamless performance in demanding environments.