Search results for: 'view'

Fluke FVF-BASIC software enables meter-to-PC data transfer and quick table or graph reports from supported Fluke instruments.

AEMC PEL 112 power and energy logger supports electrical monitoring, energy audits, diagnostics, and load studies across multiple power systems.

The GE XL Vu D4030 is a 4mm industrial video borescope designed for remote visual inspection and stereo measurement of internal components and confined structures. This configuration supports forward and side viewing with interchangeable optical tips and articulating probe control.

AEMC C.A 6117 Installation Tester Kit with RCD, loop, insulation & ground tests. Ideal for industrial environments with USB & DataView® software.

This swiveling HD video endoscope probe has 8 LEDs, a focus distance of 20-100mm, and a field of view of 100 degrees. This probe is compatible with the VE 220, VE 320, and VE 400.

INNO Instrument View Mini 2 OTDR kit (MINI2-SMF1) for last-mile and FTTH fiber testing with 1310/1550nm, 32/30dB (SMF1) performance. Features a 5-inch touch LCD, built-in VFL and light source, 8GB storage, and up to 12-hour battery operation. V-20 microscope not included.

The INNO Instrument JS-1618 AC Adapter is a 12.6V DC power supply engineered for the View 1, M7, M9, and A3 fusion splicers. It supports direct instrument operation and charging of compatible internal battery packs. The adapter accepts 100–240V AC input for global deployment and provides regulated 12.6V DC output at 1.8A.

Fluke 289/FVF True-RMS industrial logging digital multimeter combo kit with TrendCapture and FlukeView Forms software. Features 100 kHz AC bandwidth, 10,000-reading logging, LoZ voltage, low pass filter, low ohm capability, and peak recording.

AEMC 6472 Ground Tester Kit 500ft (152.4m): Perform advanced earth resistance, soil resistivity & bond testing with DataView software and a rechargeable power pack.

The INNO Instrument ACC-25-B AC Power Cable is a standard AC input cord designed to connect compatible INNO Instrument AC adapter blocks to a wall outlet. Featuring a 2-pin wall plug and C7 “Figure-8” connector, it supports 100–240V AC operation when used with approved adapters such as the JS-1618 and JS-180300 for View and M series fusion splicers.

Fluke 190-202-III-S portable ScopeMeter delivers 200 MHz bandwidth, 2 channels, 2.5 GS/s sampling, and FlukeView software for advanced industrial diagnostics.

AEMC C.A 6116N Installation Tester: Complete compliance testing with continuity, insulation, RCDs, loop, earth, power, harmonics & DataView® software.

AEMC 5070 Graphical Insulation Megohmmeter: Automated 5000V insulation testing with graphical display, programmable voltage, USB, and DataView® software included.

AEMC Power & Energy Logger supports energy audits, power monitoring, load studies, alarms, reports, and multi-phase electrical system analysis.

Fluke telephoto lens magnifies infrared images 2x for safer inspections, capturing critical details without entering hazardous zones.

Maximize your budget without sacrificing performance. This pre-owned INNO View 7 SM/MM Core Alignment Fiber Fusion Splicer with VF-15H Cleaver offers exceptional splice quality, 520x magnification, and rapid workflow — all at outstanding value for professional fiber technicians.

AEMC 5060 Digital Analog Megohmmeter — A 5000V Insulation Tester with USB, DataView® Software, and Advanced Insulation Diagnostics.

The Fluke FI-3000 FiberInspector Pro is a high-performance MPO and single-fiber inspection camera offering Live View from full trunk to end-face, autofocus and auto-centering, and automated PASS/FAIL grading in under two seconds. Works with Versiv or the FiberInspector mobile app via Wi-Fi or USB.

The INNO Instrument VIEW 12R Pro is a 12-fiber ribbon fusion splicer with motorized clamp alignment, 5-inch touch LCD, integrated heat oven, and Nano-SIM IoT/GPS support. It stores up to 10,000 splice records for ribbon and single-fiber applications.

The INNO Instrument View Mini 2 OTDR (MINI2-SMF2) is a handheld optical time domain reflectometer designed for fiber optic maintenance and live network testing. This configuration includes a 1625nm filtered live port with a 30dB dynamic range for in-service fiber analysis without service interruption.

The INNO Instrument SC-SM-UPC-30 is a 10-pack of SC/UPC single-mode splice-on connectors designed for 3.0mm fiber cables. Each connector is factory pre-cleaved and pre-polished to support consistent optical performance, with typical insertion loss of 0.15 dB and return loss ≥55 dB.

Eagle Eye Power Solutions SLB-Series Smart DC Load Bank Standard delivers programmable constant current battery discharge testing with integrated monitoring, data logging, and wide standard voltage coverage from 10V to 576V.

The INNO Instrument DIN-18 is a DC power cable designed to connect compatible INNO TS-Pro or TS-Plus thermal strippers to the power output port of supported INNO View series fusion splicers. It enables field operation by allowing the thermal stripper to draw power directly from the splicer’s internal battery.

The AEMC Lightmeter Data Logger Model 1110 is a versatile and portable instrument designed mimick the human eye response and measure foot candle and lux units precisely. Perfect for workspace lighting analysis and planning, it features intuitive setup with DataView® software and a user-friendly interface for one-hand operation.