Search results for: 'length'

Fluke Networks replacement cord for TS52/44/42 test sets, featuring durable braided design and PRC pin clips for reliable phone line testing.

Fluke Networks telecom kit: Complete electrical contractor tool set with Pro3000 Tone & Probe, impact tool, cable stripper, and durable carrying case.

Fluke Pro-Tool Kit IS60: Complete cable installation and repair kit with impact tool, snips, stripper, Maglite, and durable carrying pouch.

Fluke Networks D914 Impact Tool delivers precise cable termination with torque and impact combined, featuring built-in blade storage and adjustable impact levels.

Fluke Networks 4-Wire In-Line Modular Adapter: Test lines without service disruption, with clear markings, angled contacts, and easy probe access.

AEMC 2119.48 Canvas Pouch: Soft, durable case for clamp-on meters, ground testers, and Models 8220 & 8230—ideal for protection and portability.

AEMC 2133.72 Small Tool Bag for Field Use: Soft case with 12 exterior and 14 interior pockets, compact size with handle—perfect for field portability.

Adam Equipment BMR Measuring Rod-BMR 100: Precise, compact, and portable measuring rod for infants and young children. Easy-to-read results in 1mm increments!

AEMC 2133.76 Extra Large Carrying Bag offers secure storage and transport for compatible AEMC test equipment. Its oversized design fits multiple instruments, while the durable rubber bottom provides added protection in demanding environments.

The AEMC 2129.87 Kelvin Lead Set provides 50 ft color-coded Kelvin connections with 3 in C-clamps for low-resistance measurement applications using compatible AEMC 6290 and 6292 micro-ohmmeters.

Eaton B-Line BPR2 is a two-device metal protector plate designed for receptacle, GFCI, decorator, or blank openings to help block drywall mud, paint, and debris during installation.

Burndy YA25 502215 HYLUG compression lug supports 1/0 AWG copper conductors with a one-hole long-barrel design and 5/16 in stud size for secure electrical terminations.

ENM MT101R is a self-powered electric motor hour meter for AC or DC motors. It uses an external sensor on a 4 ft cable to detect motor magnetic field and display true motor run time.

The Fluke 700PTP-1 is a pneumatic test and vacuum pump designed to generate pressure up to 600 psi (40 bar) and vacuum down to -13 psi (-0.9 bar). It features adjustable stroke control, a vernier for fine pressure adjustment, and dual 1/4 in NPT female ports for simultaneous connection to a reference gauge and device under test.

Fluke Networks NFA-MMC24P-KIT UniPort adapter kit includes two unpinned UniPort adapters for testing single-mode or multimode MMC24 pinned cables with the CertiFiber™ Max Optical Loss Test Set. Supports one-jumper reference methods and field-replaceable adapter protection.

The PLS PLS 5R KIT 5-Point Red Laser Kit is a self-leveling five-point red laser level designed for plumb, level, and square horizontal and vertical point layout. It features a durable pendulum lock platform with tilt mode functionality and delivers accuracy of ≤1/8 in at 30 ft (≤3 mm @ 10 m). The kit includes a floor stand, magnetic L-bracket, pendulum target, red reflective target, battery pack, and carrying pouch.

Fluke Networks MRC-50EFC-SCLCKITM is a multimode 50 µm Encircled Flux compliant test reference cord kit for optical loss measurements. The kit includes four 2 m reference-grade cords with metal LC connectors, designed for use with the Fluke CertiFiber Pro fiber tester.

Reference-grade single-mode verification test reference cord designed for use with the CertiFiber™ Max Optical Loss Test Set. This 1 m, 16-fiber Type A cord supports pinned MMC16 testing and uses MMC APC/P to MMC APC/P connectors to verify proper reference setup and measurement accuracy.

The Fluke i400s AC Current Clamp extends current measurement capability for multimeters, power quality analyzers, and oscilloscopes. It supports AC current ranges from 0.5 A to 400 A with dual output scaling and a compact clamp design rated for CAT IV 600 V environments.

The Banner BT23S is a bifurcated, diffuse-mode glass fiber optic cable with a 3.2 mm bundle diameter and stainless steel monocoil sheathing. Designed for harsh industrial environments, it supports reliable sensing in high-temperature and electrically noisy applications.

Fluke Networks REMOTEID-KIT enables fast remote cable identification with MicroScanner PoE testers. Includes numbered IDs #2–7 for tracing RJ45, Ethernet, telephone, and CATV cabling layouts.

Fluke Networks TRC-MPO-UU-B MPO to MPO fiber optic test cord delivers reliable Type B polarity connectivity for MultiFiber Pro optical power meters and fiber test kits.

Fluke T6-1000PRO electrical tester uses FieldSense technology to measure true RMS AC voltage and current up to 1000V and 200A through an open fork for faster, safer troubleshooting.

Fluke 80K-40 high voltage AC/DC test probe extends multimeter measurement capability up to 40,000V peak for low-energy CAT I circuits, delivering accurate high-voltage readings with compatible Fluke meters.

Fluke Networks CFM-TRC-S-MPO12U provides a reference-grade single-mode MPO12 test reference cord set for CertiFiber Max OLTS, enabling standards-preferred one-jumper testing with reduced measurement uncertainty.