Search results for: 'rates'

The Fluke 87V/E2 CAL Industrial Electrician Combo Kit centers on the Fluke 87V true-RMS digital multimeter and includes essential accessories for industrial electrical measurement. This configuration includes NIST traceable calibration with data and supports AC/DC voltage to 1000 V, AC/DC current to 10 A, resistance to 50 MΩ, capacitance to 9999 µF, frequency to 200 kHz, and temperature to 1090°C. Rated to CAT III 1000 V and CAT IV 600 V.

The Fluke 80I-110S is an AC/DC current probe with BNC output designed for use with oscilloscopes, ScopeMeter test tools, power harmonics analyzers, and multimeters equipped with BNC inputs. It supports current measurements from 0.1A to 100A DC and 0.1A to 70A AC, with switchable 100mV/A and 10mV/A output settings. The probe provides 1Hz to 20kHz bandwidth, 600V AC rms working voltage, and accommodates conductors up to 11.8 mm in diameter.

The PLS 6R RBP KIT is a self-leveling cross line and point red laser level designed for plumb, level, and square layout applications. It provides 180° horizontal and 130° vertical fan angles with ≤1/8 in accuracy at 30 ft. This kit includes the RBP5 rechargeable Li-ion battery pack, alkaline battery pack, floor stand, magnetic L-bracket, UB9 wall/ceiling bracket, and reflective target.

The Omron Automation F92A-C-1 is an M18 inductive coupler designed to transmit ON/OFF limit switch signals to compatible inductive proximity sensors without direct electrical contact. Using magnetic coupling between coils, it enables signal transmission across a 5 mm distance. The unit operates without a power supply and is prewired with a 2 m cable. Rated IEC IP67, it supports operation in environments exposed to oil and dust within specified temperature and humidity limits.

Fluke 1738/B Advanced 3-Phase Energy Logger captures voltage, current, power, and harmonics with Fluke Connect support for in-depth energy analysis.

Fluke 1550C Insulation Resistance Tester delivers digital insulation testing up to 5 kV with DAR/PI calculations, long battery life, and Fluke Connect support.

Allen-Bradley 193-EEDB E1 Plus electronic overload relay provides precise three-phase motor protection with adjustable 3.2–16A current range, selectable trip classes, and direct mounting to 100-C IEC contactors.

Allen-Bradley 700-HA33Z24-3 is a 24V DC general-purpose ice cube relay with 3PDT contacts, push-to-test and manual override, designed for dependable industrial control and panel automation.

Allen-Bradley 1771-A3B1 PLC-5 12-slot I/O chassis provides reliable backplane communication and power distribution for 1771 modules in panel-mounted industrial control systems.

Allen-Bradley 1771-RTP1 remote termination panel for PLC-5 systems simplifies analog field wiring, supports 1771-N modules, and enables cold-junction compensation for precise thermocouple measurements.

Allen Bradley SK-R1-FUSE1-CD-F8 is an internal AC line fuse kit for PowerFlex 750 and 755 drives, designed for 400–480V systems to provide reliable converter input protection with visual fuse status indication.

WEG SSW050023T2246EPZ soft starter delivers controlled 3-phase motor starting and stopping using DSP technology. Compact SSW05 Plus design provides smooth acceleration, deceleration, and built-in motor protection.

Allen-Bradley 1771-A2B PLC-5 8-slot I/O chassis provides a stable backplane platform for 1771 modules, supporting modular control system expansion with secure back-panel mounting.

Fluke BK120-T5-600 kit combines a smart circuit breaker finder with a T5-600 tester for fast breaker identification and safe voltage, current, and continuity checks.

Fluke ii915/FPC3 acoustic imager detects gas leaks, partial discharge, and mechanical issues with LeakQ, PDQ, MecQ modes and long-range 120 m detection.

Fluke 190-202-III-S portable ScopeMeter delivers 200 MHz bandwidth, 2 channels, 2.5 GS/s sampling, and FlukeView software for advanced industrial diagnostics.

Fluke 1736/EUS logs voltage, current, power, and harmonics with flexible probes, Fluke Connect support, and Class IV safety for reliable three-phase energy analysis.

Fluke’s 1734/EUS is a three-phase electrical energy logger with Wi-Fi and flexible current probes, enabling continuous logging of voltage, current, power, energy, and power factor. Ideal for facility energy audits, load studies, and performance monitoring across distribution panels.

Amprobe PM55A Pocket Multimeter offers AutoTect automatic AC/DC detection, non-contact voltage sensing, and versatile measurement functions in a compact design.

Fluke 88-5 automotive meter delivers precise voltage, current, and pulse width diagnostics for modern and hybrid vehicles with advanced recording features.

Fluke 283FC TRMS wireless multimeter delivers CAT III 1500V testing, data logging, self-check diagnostics, and Fluke Connect for pro-grade accuracy and workflow efficiency.

Fluke 1507 insulation tester delivers advanced megohm measurements, multiple test voltages, PI/DAR calculations, and safety features for industrial electricians.

Harting 09140010301 housing offers durable IP65 bulkhead mounting for Han-Modular Compact inserts, delivering reliable industrial modular connectivity.

Arrow Pneumatics EK38 is a 40 micron sintered bronze particulate filter element kit for compatible MidFlow Arrow particulate filters, providing depth filtration and recleanable construction.