Search results for: 'instandgesetzt'

The Wöhler 7562 Compressed Air Whip with 7 Ends brings agile compressed-air cleaning reach to bigger pipe diameters with a 2.0 mm inside diameter and 1.6 ft working length.

INNO Instrument PAC-1002 BNC conversion adapter for safety BNC to banana connection, rated 600V CAT III and listed as an accessory for the SPAW7000 power analysis wavecorder.

The Inno Instrument HDMI to USB Cable is a communication interface designed for Inno Instrument VIEW series fusion splicers, including VIEW 3, VIEW 5, VIEW 7, and VIEW 12R models. It connects the splicer’s Micro HDMI port to a standard USB Type-A port on a computer for data transfer, software updates, and graphical interface mirroring.

The Inno Instrument USB-5P is a USB 2.0 Mini-B (5-Pin) to Type-A cable designed for data transfer and PC connectivity with compatible Inno fusion splicers. It supports high-speed communication up to 480 Mbps and is commonly used for firmware updates and device interface.

The INNO Instrument UN1CO Shoulder Strap is an accessory component for the UN1CO mobile workstation system. Designed for integration with the UN1CO work tray, it supports hands-free transport and stabilization of fiber optic splicing equipment during field deployment. This listing includes the shoulder strap only.

The INNO Instrument UN1COMT is a portable fiber splicing work tray with tripod designed for FTTH field operations. It provides a stable, elevated platform for securing fusion splicers and tools during ground-based or aerial work. The tray features integrated tool compartments and magnetic fixing points for organized equipment handling.

INNO Instrument SCTX600 current sensor for 0 to 600A DC and 600Apeak AC measurement, with Ø30.9 mm aperture, DB9 connector, and ±15V to ±24V supply requirement.

The INNO Instrument OLL-1000-652D-SC-APC is a 1000 m single-mode OTDR launch fiber reel designed for dead-zone elimination in fiber optic testing. The assembly uses G.652D single-mode fiber and SC/APC connectors to support accurate reflectance and insertion-loss measurement when testing optical links with an OTDR.

INNO Instrument V30 Optical Multi Meter combines optical power measurement, visual fault location, and cable continuity testing in a handheld fiber optic test instrument designed for telecommunications installation and maintenance environments.

The INNO Instrument SC-SM-APC-30S is a 10-pack of single-mode SC/APC splice-on connectors designed for 3.0mm fiber cables. Featuring a short boot configuration, these pre-cleaved and pre-polished connectors enable fusion-spliced terminations using compatible INNO Instrument fusion splicers.

INNO Instrument PAC-1004 Safety Adapter with safety connector and spring hold type. Rated 600V, CAT II, 10A, with red and black adapter components.

Fluke Networks JR-ORT-2 JackRapid Termination Tool enables fast, one-handed jack termination for Ortronics jacks, seating and cutting all wires in one squeeze.

Fluke Networks LIQ-KIT-IS60: Complete installation and testing kit for cables and networks with 10G performance and LinkIQ reporting capabilities.

INNO Instrument PAC-1001 fork terminal adapter pair for connecting a standard 4 mm banana plug to a binding post terminal. Rated 1000V, CAT II, 20A. Includes red and black adapters.

The INNO Instrument EG-18 Electrode Grinder is a portable maintenance tool designed to resurface tungsten electrode rods used in fiber optic fusion splicers. It restores electrode tip geometry to support stable arc discharge and consistent splicing performance in field and lab environments.

The INNO Instrument UN1CO Mobile is a compact fiber splicing workstation tray designed to securely support a fusion splicer and cleaver during field operations. Constructed from reinforced plastic, the tray provides integrated magnetic fixing, a dedicated cleaver mount, and organized compartments for splice protection sleeves and cleaning liquids.

Fluke BP1730 rechargeable lithium-ion battery pack designed exclusively for the Fluke 1730 Energy Logger, delivering reliable portable power with OEM-approved charging and safety compliance.

Fluke Networks 44210013 double-slotted stripper for 22/24 AWG JKT station wire with built-in cutter, delivering clean insulation removal for telecom installers.

Fluke JackRapid tool: Terminate jacks 8x faster with precision. One-handed squeeze action with built-in blade for accurate, effortless cable termination.

The Inno Instrument UN1CO Pole Mount Bracket is an accessory designed to secure the UN1CO work tray to utility poles and similar vertical structures. It provides a stable mounting interface for field fiber splicing applications. The bracket assembly includes integrated straps and a safety retention loop. UN1CO tray not included.

The INNO Instrument UN1COLK UN1CO Ladder Mount Work Platform is an ABS workstation designed for secure positioning on ladder rungs during fiber splicing operations. It provides a stable surface for INNO View series fusion splicers and common industry cleavers in elevated or confined environments.

The INNO Instruments UN1COMK UN1CO Mobile Smart Tray Kit is a portable workstation designed for fiber optic fusion splicing in elevated and field environments. The UN1CO Mobile Kit supports wearable, tripod, ladder, and pole-mounted configurations for field-based fiber installation work.

Land Instruments 702-777 enhances IR pyrometer accuracy with stable optical chopping for noise-reduced measurements, ideal for demanding industrial environments.

Land Instruments 702-778 delivers reliable zero-point calibration for select IR pyrometers, correcting drift and ensuring accurate infrared temperature measurement.

INNO Instrument SCTX1000 is a 1000A AC/DC pass-through current sensor with 30.9 mm aperture, DB9 connection, DC to 300 kHz bandwidth, and ±15V to ±24V supply requirement.