Search results for: 'kanna full'

Handheld thermal imaging camera built for users who need high-resolution thermal data, accurate temperature measurement, and a wider field of view for larger targets or shorter working distances. It uses a 640 x 480 uncooled VOx microbolometer, offers thermal sensitivity below 20 mK, and supports temperature measurement ranges of up to 2,000 °C.

Fluke Networks P4480009 Replacement Cord features angled bed-of-nails and piercing pin clips for reliable field testing with TS52 and TS40 series test sets.

Digi-Pas DWL80E digital level delivers pocket-size angle and slope measurement with 0.1° resolution, magnetic placement, HOLD reading capture, and user self-calibration for precise alignment work.

WOHLER A500 12-inch Flue Gas Probe: Precision in Every Measurement

Fluke Networks FI1000-MPO-RT replacement tip for FI-1000 FiberInspector provides precise MPO/MTP fiber inspection without a translator knob for seamless testing.

The Hydrajaws Hydraulic Hollow Cylinder Tester Kit consists of a two-speed manually operated aluminium hand pump, digital gauge, 3m hose and either 180kN (40466lbf), 370kN (83179lbf) or 500kN (112405lbf) hollow bore aluminium cylinder which is more portable and weighs less than a traditional steel cylinder.

Pitot Tube Specifications

Pitot Tube Specifications

Fluke ISLS8 insulated slotted screwdriver offers 1000 V safety, ergonomic soft-grip handle, and slim shaft access for precision electrical work.

Polyethylene bottles are not chemically reactive Purity pump to prevent backwash of contaminants into container

The INNO Instrument View 5X is a core alignment fusion splicer designed for single-fiber applications across SM, MM, DS, and NZDS fibers. This kit includes the V12 cleaver, integrated heater, 5.0” touchscreen, IoT & GPS capability, battery, and carrying case.

The INNO Instrument VIEW 3X is an Active V-Groove Cladding Alignment Fusion Splicer designed for single-fiber splicing across SM, MM, DS, and NZDS fibers. This standard OEM kit includes the V12 cleaver and integrated heater, with embedded IoT, GPS, and View Pro Manager cloud connectivity for project and device management.

Full assortment of test functions Precise ACV ACA True RMS Measurements Overload Protection Non-contact voltage detection LCD Display 3-5/6 5999 Counts DCV 600mV/6V/60V/600V ±（0.5% +5d） ACV 600mV/6V/60V/600V ±（1% +4d） TRUE-RMS DCA 60mA/600mA ±（1.2% +5 d）, 10A±（3.0% +5d） ACA 60mA/600mA ±（1.5% +5 d）, 10A±（3.0% +5d）TRUE-RMS Frequency 9.999Hz/99.99Hz/999.9Hz/9.999KHz/99.99KHz/999.9KHz/9.999MHz ±（1.5% +5d） Duty Cycle 21%~99%±（2.5% +5 d） ResistanceΩ 600Ω/6k/60k/600k/6M/60MΩ ±（0.8% +5d） Capacitance 60nF/600nF/6uF/60uF/600uF/6mF ±（4% + 5d）,100mF ±（4% +10d） Temperature(C/F) -20℃~1000℃±（1% + 3d） -4℉~2372℉±（1% + 3d） Continuity Buzzer ≤30Ω , buzzer beeps Diode Test Y NCV Detection Y Data Hold Y LED Light Y LCD Backlight Y Analog Bar Y Low Battery Indication Y Low Battery Indication Y Accessories Test Lead, K-type thermocouple, Manual Power 1.5V AAA x 3pcs (Not Included)

The Buckleys Wet Roof Pro2 is a flat roof leak detector kit designed to locate leaks in wet, non-conductive roofing membranes. It uses electrical current flow through surface moisture to pinpoint faults and also includes a wet sponge mode for testing upstands and other vertical surfaces.

Fluke Networks 44210015 wire stripper delivers clean 22/24 AWG insulation stripping with dual slots, cutter, and reliable performance for telephone installers.

The Fluke 1775 Power Quality Analyzer combines high-speed data capture (1 MHz transient sampling) with automated power-quality measurements, intuitive touchscreen operation, and full three-phase logging—ideal for industrial, utility and renewable energy systems.

Pitot Tube Specifications

Pitot Tube Specifications

Pitot Tube Specifications

Scalpel knife with durable plastic protective cap Handle material: aluminum Blade Material: SK-5 Total length: 5.7 in. 0.31 in. (8mm) diameter handle

The in-use cover for Nimbus and Eclipse Lab Balances helps to protect the products from dust and material. This disposable item keeps the balance clean while still letting the user gain access to all the functions. Using the see-through cover can reduce the need for costly maintenance and prolong the life of the balance.