Search results for: 'useful'

Hydrajaws M2000 scaffold tie tester kit supports 0-25kN pull testing for scaffold anchors, with analogue and digital gauge options.

Elcometer 331 TH Deep Cover Concrete Covermeter & Half Cell Gauge for reinforced concrete surveys requiring rebar location, cover depth measurement, bar sizing, and TH linear/grid data logging.

Amperite 115C60 thermal time delay relay delivers fixed 60-second Delay on Break control with 115V AC/DC input, SPST-NC contacts, and a 3A resistive rating.

Wenglor UF88VCF-P24 photoelectric switch sensor supports non-contact object detection for industrial automation with DC operation, fast switching performance, and flexible sensing capability for demanding machine and control tasks.

Sprecher + Schuh CS7E-31E control relay with attached CS7-PV auxiliary contact block. Rated for up to 690V AC, this 4-pole industrial control relay is used for switching control circuits in panel and machine control applications.

Crouse-Hinds 4 B conduit hangers provide steel mechanical support for 1-1/2 in rigid/IMC conduit and EMT or rigid/IMC runs in a with-bolt design. Pack of 100 for installation stock and project supply.

Westinghouse Ovation 1C31179G02 Remote I/O MAU module for distributed control system remote I/O communication and field device integration.

Allen-Bradley 800H-JP2KB7AAXX hazardous location selector switch from Bulletin 800H. This is a 3-position, non-illuminated, maintained standard knob operator with KB7 standard cam and AAXX contact block configuration.

AutomationDirect D2-08NA-1 is an 8-point AC input module for DL205 PLC systems with 80-132 VAC input range, 47-63 Hz operation, removable terminal connection, and logic-side status indication.

INNO Instrument PAC-1002 BNC conversion adapter for safety BNC to banana connection, rated 600V CAT III and listed as an accessory for the SPAW7000 power analysis wavecorder.

Eagle Eye Power Solutions SG-500 portable digital hydrometer for specific gravity measurement in battery fluids, non-datalogging, with automatic temperature compensation and 1.000-1.405 range.

Fisher SONDE-8K 8.2 kHz transmitter for tracing non-metallic pipes and locating blockages. Works with TW82 and TW8800 line tracers to send a detectable signal inside pipe systems.

The INNO Instrument CG-24 Cooling Tray is a standard accessory designed for the INNO Instrument A3 Fusion Splicer. It provides a dedicated, heat-resistant surface for fiber optic protection sleeves immediately after oven heating.

Fisher XLT30-B acoustic leak detector with Multi-Sensor provides precise water leak detection using adjustable filters, notch rejection, and high-sensitivity microphones for concrete, asphalt, and turf surfaces.

Fisher TW82 Digital Line Tracer delivers 82.175 kHz utility locating with Normal and Lateral modes for tracing buried pipes and cables using conductive or inductive methods.

The INNO Instrument JS-1618 AC Adapter is a 12.6V DC power supply engineered for the View 1, M7, M9, and A3 fusion splicers. It supports direct instrument operation and charging of compatible internal battery packs. The adapter accepts 100–240V AC input for global deployment and provides regulated 12.6V DC output at 1.8A.

The INNO Instrument UN1CO Shoulder Strap is an accessory component for the UN1CO mobile workstation system. Designed for integration with the UN1CO work tray, it supports hands-free transport and stabilization of fiber optic splicing equipment during field deployment. This listing includes the shoulder strap only.

The Dwyer AP-7021-153-39 is a diaphragm operated pressure switch with an adjustable 10 to 125 psig range. It uses an SPDT snap acting switch in a general-purpose enclosure and is designed for air, non-corrosive gases, or compatible liquids.

The Allen-Bradley 2198-K57CK-D15M is a universal feedback connector kit for Kinetix 5700 drives. It provides wire terminations for encoder signals when using Allen-Bradley 2090-Series motor feedback cables and connects to the drive’s universal feedback (UFB) port.

The Allen-Bradley 800B-PS11 is a 16 mm snap-action contact block with one normally open and one normally closed contact. Designed for Bulletin 800B push button and selector switch operators, it supports reliable low-voltage switching and compact panel installations in light industrial and instrumentation applications.

The Honeywell 621-9939 Serial Link Module is a communication interface for Honeywell Series 9000 and IPC 620 control systems. It manages serial I/O data exchange between the main processor and distributed serial devices using dual asynchronous channels and RS485 connectivity.

The C3 Controls DDS2-340-DHGRY is a non-fused, 40 amp, 3-pole disconnect switch designed for door-mount applications. It features a red/yellow rotary operating handle and an IP65 ingress protection rating for use in industrial control environments requiring reliable circuit isolation.

The GE Fanuc Genius IC660BBA106 is a current-source analog input block with six input channels designed for the Genius I/O system. It operates on 115 VAC or 125 VDC and supports 4–20 mA current inputs for industrial analog signal acquisition.