Search results for: 'require'

Fluke FPC1S-FPQ170-1 Premium Care provides one year of service coverage for 177X Series Power Quality instruments. The plan includes annual calibration or performance check, repair coverage with parts and labor, expedited freight, software updates, accessory replacement, and priority technical support without loaner service.

The Appleton ST-4575 is a 3/4" 45° liquidtight connector designed for use with liquidtight flexible metal conduit (LFMC). This ST Series plain throat fitting provides a dependable connection while sealing out oil, water, dust, dirt, and fumes. Constructed with a malleable iron body and finished with zinc electroplate, chromate, and epoxy powder coat, it is suitable for wet locations and Class I, Division 2 environments.

Industrial multimeter service kit combining the Fluke 179 True-RMS digital multimeter and Fluke 323 True-RMS clamp meter. Designed for troubleshooting electrical and electronic systems, with voltage measurement up to 1000 V AC/DC and AC current measurement up to 400 A.

The Opto 22 AD6T is a single-channel, optically isolated analog input module designed for 0–5 VDC signals. Built in Opto 22 G1 (Standard) form factor, it provides 12-bit resolution, 4,000 VRMS isolation, and compatibility with Standard analog I/O racks for industrial control systems.

The Allen-Bradley 700-HK36A1 is a slim line plug-in relay with a 120V AC control voltage and one SPDT change-over contact. It supports a nominal current of 16 A and uses silver nickel contacts. Designed for plug-in connections, it is suitable for industrial control applications requiring compact relay solutions.

The Universal 447-LR-TC-P is a 120V magnetic fluorescent ballast designed to operate two lamps in trigger-start configurations. It supports F20T12, F15T8, and F15T12 lamps and features a low power factor, lag-type circuit. UL and CSA certifications support indoor and Type 1 outdoor use.

The Hammond Power CRX06D1BC is a three-phase iron core line reactor rated for 600 VAC and 6.1 A. Part of the HPS Centurion® R Series, it provides controlled impedance to mitigate harmonics and electrical transients in AC drive systems operating at 50/60 Hz.

The Eaton H2006B-3 is a Freedom NEMA heater coil set designed for thermal overload protection in motor control applications. This Class 20 standard trip heater pack supports selectable full load current settings from 1.79A to 2.9A via dial positions A–D and is supplied as a factory-calibrated set of three elements.

Banner Engineering IAT210S glass fiber optic sensor cable with diffuse-reflective sensing. Features a right-angle brass sensing end, stainless steel monocoil sheathing, 3.2 mm glass fiber core, and 4.572 m length. Designed for use with a separate fiber optic amplifier.

ABB S201-K1 miniature circuit breaker set consisting of two single-pole 1 A MCBs from the System pro M compact S200 series. Each breaker features a K tripping characteristic and is designed for DIN-rail mounting in AC or DC electrical installations.

Fluke i200 AC current clamp enables accurate 0.5–200A AC measurements using a multimeter. Features 1 mA/A output, banana plug interface, and CAT III 600V safety for electrical testing.

The Allen-Bradley AK-R2-360P500 Dynamic Brake Resistor is an external medium-duty resistor kit designed for PowerFlex 70 and 700 series drives. It provides 360 ohms of resistance with an 86 watt continuous power rating to dissipate regenerative energy during motor braking.

The KAMAN Sensors digiVIT 855949-000 is a self-tuning digital driver for non-contact inductive and eddy current position and displacement sensors. It features pushbutton calibration, embedded intelligence, selectable analog outputs, and Ethernet connectivity for monitoring and parameter switching.

Fluke 302+ digital clamp meter delivers reliable 400A AC current and 600V AC/DC measurements in a compact handheld design with backlit display, built for everyday electrical troubleshooting and maintenance tasks.

Fluke Networks MRC-50-LCLC-0.3M-M is a multimode 50µm LC-LC test reference cord with a durable metal latch, engineered for OTDR port protection and accurate fiber certification measurements.

Fluke AC288 SureGrip Terminal Block Probe Set delivers safe, precise connections to spring clamp and screw terminals using retractable stainless steel probe tips compatible with 4 mm test leads.

The Honeywell 621-9938RC is a dual-port Serial I/O Module for the IPC 620/621 Programmable Controller System. It provides redundant serial communication, configurable I/O point allocation, DIP switch configuration, front status LEDs, and supports hot-swappable operation in redundant serial I/O architectures.

The Siemens 3SU1400-1AA10-1BA0 is a SIRIUS ACT contact module with one normally open contact. It features screw terminals and a snap-on design for front plate mounting behind compatible actuators. Designed for industrial control and signaling applications requiring reliable signal switching.

The Edwards Signaling 48XBRMG120A is a green LED visual signal light designed for indoor and outdoor industrial applications. Operating on 120 VAC, this dual-mode beacon supports steady-on or flashing operation and is housed in a corrosion-resistant NEMA 4X enclosure.

Mersen A050F300 Protistor semiconductor fuse delivers ultra-fast aR protection at 500V and 300A, designed to limit let-through energy and protect sensitive power electronics in high-performance drive and converter systems.

The MEAN WELL HRP-600-15 is a single-output enclosed AC-DC power supply delivering 15 VDC at up to 43 A. It features built-in active power factor correction, fan cooling with ON-OFF control, and protection against overload, over-voltage, and over-temperature for industrial power applications.

The ABB Bailey IMASI02 is an Analog Slave Input module for the Infi 90 Process Management System. It converts analog field signals into digital data for processing by a Multi-Function Processor and interfaces up to fifteen process signals through a single MMU slot.

The ABB Bailey IMFCS01 is an intelligent Frequency Counter Slave Module for INFI 90 and Net 90 DCS platforms. It processes high-speed pulse inputs from field sensors and communicates frequency and period data to a Multi-Function Processor via the slave expander bus for speed monitoring and control.

Turck BI10-G30SK-RZ3X2 inductive proximity sensor with 10 mm rated switching distance. M30 threaded, flush-mount metal housing with terminal chamber connection. Supports 20–250 VAC and 10–300 VDC operation with 2-wire NC output for industrial metal detection.

The Yamatake Honeywell J-HMM00 is a high-level analog input module designed for Distributed Control System (DCS) architectures. Operating on 24 VDC with 60 mA current consumption, it supports multi-point analog signal acquisition for integration within compatible control systems such as MSC10.