Search results for: 'box electromures'

Eaton Cutler-Hammer SL7-BL120-R delivers high-visibility red LED signaling in a 70 mm stacklight format, operating on 120VAC for industrial status indication and machine signaling applications.

Allen-Bradley SP-140550 bus capacitor kit for Bulletin 1336 AC drives. Designed for 460 VAC systems in the 75–200 HP range, this mountable component supports stable DC bus operation.

The General Electric CR104PLT43 is a 30.5mm push-to-test indicator light designed for 240V AC industrial automation systems. Part of the GE CR104P series, it utilizes a resistor power supply and supports machine-tool and control panel applications where manual lamp verification is required.

The Delta AFB1224HE is a 24V DC brushless axial cooling fan designed for reliable airflow in electronic and industrial equipment. It features dual ball bearings, locked rotor protection, and a 120 × 120 × 38 mm frame for consistent thermal management applications.

Square D 2510KG1 manual switch delivers reliable 30A control for single-phase systems with a 2-pole toggle design and non-reversing operation in a compact NEMA 1 enclosure.

The Universal 827-SLH-TC-P is a magnetic instant-start fluorescent ballast designed to operate two slimline lamps on a 277V, 60 Hz power supply. It supports series lamp operation and is intended for replacement use in compatible commercial and industrial lighting fixtures.

Allen Bradley 135-777 bridge rectifier kit designed for 460V industrial drive systems, supporting 3–15 HP applications and used within compatible Allen-Bradley 1336 series motor drives.

Fluke FEV100/BASIC EVSE tester simulates an electric vehicle to verify charging station safety, run GFCI tests, and check voltage, duty cycle, and grounding.

3-3/4 autorange digital multimeter 23pcs 1/4" driver socket set Heavy duty curved-claw hammer W/Fiberglass handle Adjustable wrench 8" IC extractor Hobby vise Slip-channel pump pliers 254mm ProSoft precision screwdriver 2.0x50mm (2") ProSoft precision screwdriver 2.4x75mm (3") ProSoft precision screwdriver 3.0x100mm (4") ProSoft precision screwdriver #00x50mm (2") ProSoft precision screwdriver #0x75mm (3") ProSoft precision screwdriver #1x150mm (6") Utility component storage box Pro-soft screwdriver 5.0 x75mm Pro-soft screwdriver #1 x75mm Pro-soft screwdriver 5.0 x100mm Pro-soft screwdriver #1 x100mm Pro-soft screwdriver 6.0 x100mm Pro-soft screwdriver #2 x100mm Pro-soft screwdriver #2 x250mm Pro-soft screwdriver 6.0 x40mm Pro-soft screwdriver #2 x40mm Fine tip straight tweezer Long nose plier 135mm Diagonal cutting plier 110mm Dual Color Lineman's plier Dual Color cutting plier Dual Color Long nose plier 9pcs ball point long arm hex key set 10pcs electronic combination wrench 5pcs needle file set Ceremic soldering iron 110V Desoldering wick Solder core 63%, SN PVC insulated tape Utility knife (3 blades self loading) Measuring tape 3M/10FT All purpose snip Desoldering pump Flux bottle (2pcs/pack) Blow brush ( ∅62mm) Telescopic magnetic pick up tool Inspection mirror Pallet for PK-15308 Heavy-duty ABS cases with wheels and telescoping handle

The General Electric DS200DDTBG2ABB is an LCI Auxiliary I/O Terminal Board for GE Mark V Speedtronic gas and steam turbine control systems. It provides auxiliary signal termination, conditioning, and isolation for analog and digital I/O in high-voltage industrial control environments.

Fluke INPP10 insulated pump pliers deliver fast adjustment, self-locking grip, and 1000 V protection for safe work on energized circuits.

Allen-Bradley 1336-RLOAD-SP5A load resistor designed for 1336 adjustable frequency drives. Supports 575V operation in Frame E systems rated 150–300 HP for controlled load management.

The Deltron ST150-1XX is a 150 W industrial AC-DC switching power supply with three DC outputs. It provides one 5 V output rated at 20 A and two 12 V outputs rated at 5 A each. Designed for terminal block wiring, it supports dual-range AC input and is used in control and automation systems.

The Turck B8241-0/PG9 is a field-wireable M12 right-angle, 4-position female connector designed for sensor and actuator wiring in industrial automation. It uses a screw terminal connection, supports 250 V at 4 A, and accepts PG9 cable glands for secure, sealed installations.

Allen-Bradley 1336-BDB-SP4C Gate Drive PCB designed for 1336 series variable frequency drives, supporting 20 HP and 460 VAC operation for reliable drive control and power regulation.

Tri-Mag Super 6250T2 power supply delivers regulated multi-voltage DC output including +5V, ±12V rails with up to 250 watts capacity for system power distribution and integration applications.

The Square D 8501NR61 is an 11-pin plug-in relay socket designed for use with compatible Square D relays and timers. It features single-tier screw clamp terminals and supports both panel and DIN rail mounting for industrial control applications.

Allen-Bradley 1336-T-SP5A control transformer designed for 1336 PLUS, PLUS II, Force, and Impact drives, supporting 150–250 HP systems at 460 VAC with stable internal control power delivery.

SOR 4N3-KK4-N1-C1A-ZZ pressure switch delivers adjustable 2-25 PSI switching for industrial pressure control, with 750 PSI over range and 1000 PSI proof pressure for monitored process applications.

ABB NKTU11-14 INFI 90 Termination Loop Cable supports INFI 90 system cable connections with a loop cable format and printed 300V, 90°C, #22 AWG construction details.

The GE DS3800XTFP is a thyristor fan-out adapter board for Speedtronic Mark IV turbine control systems. It distributes logic-level signals through eight red jack connectors and a 6-pin terminal, supporting structured signal routing within MKIV control racks.

Allen-Bradley SP-135775 bus capacitor kit designed for 1336 series AC drives. Restores DC bus voltage stability and ride-through performance in compatible 15–50 HP drive configurations.

Leviton 16342-W Decora Plus duplex receptacle delivers a 20A, 125V NEMA 5-20R wiring solution with side-wire termination, self-grounding design, and white smooth-face Decora styling.

Siemens 771-8STF1 current-to-pneumatic (I/P) transducer converts a DC mA input to a proportional pneumatic output. Configuration: 4–20 mA input, 3–27 psig output, standard output capacity, terminal strip, intrinsically safe approval.