Search results for: 'pins'

The GE DS200VPBLG1AFF is a VME P2 backplane board used in GE LS2100 and Load Commutated Inverter control systems. It provides centralized power and signal distribution across a 13-slot chassis, supporting DSPC, gate distribution, exciter, and I/O extender boards.

Application RJ11 - 2, 4, 6 pin Modular plugs

ASEA RXIL 2 plug-in protection relay, model RK 412 112-AC, from the COMBIFLEX system. This module features a front rotary adjustment dial and plug-in rear pin interface, designed for installation in compatible COMBIFLEX relay systems.

Auto-adjust straight motion crimp action RJ45, RJ11, RJ22 modular plugs Overall Length: 8.6 in.

The INNO Instrument ACC-25-B AC Power Cable is a standard AC input cord designed to connect compatible INNO Instrument AC adapter blocks to a wall outlet. Featuring a 2-pin wall plug and C7 “Figure-8” connector, it supports 100–240V AC operation when used with approved adapters such as the JS-1618 and JS-180300 for View and M series fusion splicers.

Allen-Bradley PHOTOSWITCH Series 9000 transmitted beam receiver sensor (42GRR-9003-QD, Series A) with 70–264V AC/DC operation, isolated N.O. solid-state (MOSFET) output, 4-pin AC Micro quick-disconnect, and IR 880 nm optics.

Allen-Bradley 700-HA33Z24-3 is a 24V DC general-purpose ice cube relay with 3PDT contacts, push-to-test and manual override, designed for dependable industrial control and panel automation.

The AMLOC 1204416-19 is a capacitance sensor assembly housed in a sealed enclosure with a rear-mounted multi-pin connector. This unit consists of the sensor electronics only and does not include a probe or external accessories. Identification and configuration are based on visible labeling and construction.

The Fluke Networks NFA-MPO12P-KIT is a UniPort adapter kit designed for MPO 12 pinned fiber testing with the CertiFiber™ Max Optical Loss Test Set. It supports single-mode and multimode testing and enables standards-preferred one-jumper reference measurements while protecting the test port.

The FANUC A06B-6114-K213/E is an industrial connector plug used for encoder or brake connections on FANUC servo motors. Manufactured for CNC and automation systems, this connector is supplied as a right-angle style plug and is identified by the FANUC part number A06B-6114-K213/E.

The GE DS3800XTFP is a thyristor fan-out adapter board for Speedtronic Mark IV turbine control systems. It distributes logic-level signals through eight red jack connectors and a 6-pin terminal, supporting structured signal routing within MKIV control racks.

Fluke Networks CFM-TRC-S-MPO12U provides a reference-grade single-mode MPO12 test reference cord set for CertiFiber Max OLTS, enabling standards-preferred one-jumper testing with reduced measurement uncertainty.

Fluke Networks TRC-SM-VERIFY-MPO12P is a reference-grade single-mode MPO12 verification cord for CertiFiber Max systems, ensuring accurate reference validation for pinned MPO Type A fiber testing.

Fluke Networks test lead cable enables accurate RJ-11 connections with angled bed-of-nails and piercing pin clips for reliable test equipment data transfer.

ApplicationRJ11 - 2, 4, 6 pin Modular plugs

Parallel crimping action Integrated round cable stripper and cutter Smooth ratcheting mechanism

The GE Fanuc IC693CHS392G is a 10-slot expansion I/O baseplate for the Series 90-30 PLC platform. It features a 25-pin D-type expansion connector, rack address DIP switch, and supports local I/O expansion up to 50 feet. Designed for use with compatible CPU baseplates.

The Struthers-Dunn W88AHPX-36 is a hermetically sealed 3PDT plug-in relay from the 88HP Series, rated 10A and configured for 120VAC operation. It features an 11-pin octal base and a sealed gray metal enclosure designed to prevent contamination and corrosion.

Fluke Networks TRC-SM-VERIFY-MPO16P is a reference-grade single-mode MPO16 verification cord for CertiFiber Max, designed to confirm accurate reference settings when testing pinned MPO16 fiber links.

The Potter & Brumfield KUP14D15 is an enclosed electromechanical control relay with a 12 VDC coil and a 3PDT (3 Form C) contact configuration. This relay features an 11-pin blade terminal base and a clear polycarbonate dust cover for component visibility.

The Allen-Bradley 2198-K57CK-D15M is a universal feedback connector kit for Kinetix 5700 drives. It provides wire terminations for encoder signals when using Allen-Bradley 2090-Series motor feedback cables and connects to the drive’s universal feedback (UFB) port.

Allen-Bradley S50411-002 dynamic brake board enables controlled motor deceleration by managing regenerative energy through external brake resistors in compatible 1305 variable frequency drives.