Search results for: 'left'

INNO Instrument SPA1000 digital power meter with 1 power channel, AC/DC measurement, 100 kHz bandwidth, up to 1000 V and 20 A input, 4-item LED display, and harmonic measurement to the 100th order.

The INNO Instrument IN-SS-45mm fiber splice protection sleeves are heat-shrink sleeves designed to reinforce and protect single fiber fusion splices. Each sleeve uses a composite structure consisting of a cross-linked polyolefin outer tube, hot-melt adhesive inner layer, and stainless steel reinforcing rod.

The INNO Instrument IN-SS-40mm fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to reinforce single-fiber fusion splices. A stainless steel strength member helps prevent bending while the clear outer tube allows inspection of the splice during installation.

The INNO Instrument IN-RS-40mm ribbon fiber splice protection sleeve is a 40 mm heat-shrink sleeve designed to protect ribbon fiber fusion splices. The sleeve incorporates a single ceramic reinforcement rod for structural support and alignment protection after splicing. A clear heat-shrinkable outer tube combined with an internal EVA adhesive liner.

The INNO Instrument OLL-1000-652D-SC-UPC OTDR Launch Fiber Reel provides a 1000 meter G.652D singlemode fiber lead designed for OTDR testing. Featuring SC-UPC connectors, the launch fiber enables accurate measurement of near-end and far-end events.

INNO Instrument OLL-500-652D-SC-APC OTDR launch fiber cable provides a 500 m singlemode buffer between an OTDR and the fiber under test. Using G.652D 9/125 µm fiber with SC/APC connectors on both ends, it supports near-end connector characterization and reveal events that may be obscured during OTDR trace acquisition.

The INNO Instrument FL-300-SC-APC is a 300 m Singlemode launch fiber reel designed for Optical Time Domain Reflectometer (OTDR) testing. It provides a controlled fiber length between the OTDR and the link under test, enabling measurement of the first connector in a fiber span. The reel format protects the fiber during storage and field deployment.

The INNO Instrument FL-100-SC-APC Singlemode OTDR Launch Fiber Reel is a 100 m fiber launch cable designed for optical time domain reflectometer testing. It provides a controlled fiber segment that allows OTDR measurements to stabilize before the first connection in a fiber link.

The INNO Instrument FL-100-SC-UPC is a 100 m singlemode OTDR launch fiber reel designed for fiber optic testing and link characterization. Featuring SC/UPC connectors on both ends, this launch cable acts as a pulse suppressor and delay line that enables Optical Time-Domain Reflectometers (OTDR) to measure insertion loss.

The INNO Instrument SC-SM-UPC-30S is a 10-pack of SC single-mode UPC splice-on connectors designed for 3.0mm jacketed fiber. Using fusion splice termination, these short boot SOC connectors provide stable optical performance without field polishing or index-matching gels.

The INNO Instrument SC-SM-APC-30 is a 10-pack of SC-type single-mode splice-on connectors designed for 3.0mm fiber cables. Featuring APC polish and pre-polished factory ferrules, these connectors support fusion splice termination with low insertion loss and high return loss performance.

The INNO Instrument SC-SM-UPC-09 is a 10-pack of single-mode SC/UPC splice-on connectors for 900µm fiber. Designed for fusion splicer termination, these connectors eliminate polishing, adhesives, and mechanical splicing. With typical ≤0.2 dB insertion loss and ≥55 dB return loss, they support G.652D and G.657A2 fiber types.

Rugged waterproof hard case in a 1550-class size with egg-crate lid foam, customizable pluck-foam base, pressure valve, reinforced hasps and dual latches for protecting tools, meters, cameras and electronics.

Olympus SA32-0L standard PAUT wedge for 0° longitudinal wave normal scan, designed for A32 footprint 32-element probes and general weld or component inspection requiring a straight-beam configuration.

Easy-Laser Case 3 shim kit with Types A/B/C/D, 0.05–2.00 mm stainless steel shims, permanently marked and burr-free. Foam-organized case for precise machine alignment setups.

Shindengen F020158R.0831 rotary solenoid delivers precise DC-driven motion for industrial and automation systems, ideal for assemblies like the M100AIE/U/H.

Wohler Viper S 2028 is a compact cleaning rod system for small chimneys, pipes, and ventilation ducts, built with a GRP rod, abrasion-resistant PA jacket, length marking, splash protection, and an ergonomic handle.

Eaton DILM9-10 / XTCE009B10T 24V 50/60Hz 3-pole motor contactor with 9A AC-3 rating, 4 kW capacity, 1NO auxiliary contact, and screw terminals for dependable control of pumps, fans, conveyors, and OEM panels.

INNO Instrument SCTX1000 is a 1000A AC/DC pass-through current sensor with 30.9 mm aperture, DB9 connection, DC to 300 kHz bandwidth, and ±15V to ±24V supply requirement.