Search results for: 'left the'

The INNO Instrument IN-RD-40mm ribbon fiber protection sleeve provides environmental and mechanical protection for ribbon fiber fusion splices. The 40 mm heat-shrink sleeve incorporates a double ceramic rod structure that maintains alignment and rigidity during the shrinking process.

The INNO Instrument 300-meter Fiber Optic Launch Reel is a  singlemode reference fiber used with optical time domain reflectometers (OTDR) to eliminate near-end dead zones during fiber testing. The reel integrates singlemode fiber with SC/UPC connectors on both ends that enables accurate measurement of connector loss and reflectance.

INNO Instrument SCTH200 pass-through current sensor with 0–200A DC range, 200A peak AC, DC to 500kHz bandwidth, DB9 connector, and Φ28mm aperture.

INNO Instrument SCTX1000 is a 1000A AC/DC pass-through current sensor with 30.9 mm aperture, DB9 connection, DC to 300 kHz bandwidth, and ±15V to ±24V supply requirement.

INNO Instrument SPA3000 digital power meter with 3 power channels, up to 1000 V measurement, DC to 100 kHz bandwidth, and 4-item LED display for voltage, current, and power measurement.

The INNO Instrument SC-SM-UPC-30 is a 10-pack of SC/UPC single-mode splice-on connectors designed for 3.0mm fiber cables. Each connector is factory pre-cleaved and pre-polished to support consistent optical performance, with typical insertion loss of 0.15 dB and return loss ≥55 dB.

Lenze AC Tech M1430B MC1000 series variable frequency drive rated 3 HP (2.2 kW) with 400/480 VAC 3-phase input and 0–120 Hz output in a NEMA 1 enclosure. Front keypad/faceplate with control buttons is missing; front of drive is open.

Cisco 2821 Integrated Services Router with WAAS NME-WAE-502-K9 for WAN optimization, onboard Gigabit Ethernet, and WIC-1DSU-T1-V2 T1 CSU/DSU connectivity. Modular design for branch networking versatility.

INNO Instrument SCTX600 current sensor for 0 to 600A DC and 600Apeak AC measurement, with Ø30.9 mm aperture, DB9 connector, and ±15V to ±24V supply requirement.

The INNO Instrument View 600 OTDR is a modular fiber optic test platform configured with a 1310/1550 nm single-mode OTDR module delivering 36/35 dB dynamic range. This kit includes the V-20 fiber inspection microscope for connector end-face inspection. The View 600 integrates automated SOLA link analysis, optical power meter functionality.

The Megger NIM 1000 is a portable net impedance meter for low-voltage grid testing. It delivers adjustable 80–1000A test current and measures impedance, resistance, reactance, and PEN impedance with harmonic analysis to the 10th order, plus USB data export.

SKF TKSA 40 laser shaft alignment tool for horizontal single coupling alignment with soft foot check, alignment tolerance evaluation, internal result storage, and USB data transfer capability.

The INNO Instrument SC-SM-APC-30S is a 10-pack of single-mode SC/APC splice-on connectors designed for 3.0mm fiber cables. Featuring a short boot configuration, these pre-cleaved and pre-polished connectors enable fusion-spliced terminations using compatible INNO Instrument fusion splicers.

Moxa PWR-G7000-AC power supply module with 85–264 VAC input for ICS-G7000 series switches, supporting 47–63 Hz and 0–60°C operation in modular chassis.

Radiodetection RD4000MRx pipe and cable marker locator kit with TX-10 transmitter is ready for utility tracing, markout, depth/current checks, and EMS/Omni marker locate workflows.

INNO Instrument SBT60 battery tester measures internal resistance and voltage using an AC four-terminal method, with 6 V and 60 V ranges, comparator functions, storage, and statistical analysis for battery testing and sorting.

The INNO Instrument M9+ is a compact core alignment fusion splicer for single fiber SM, MM, DS, and NZDS applications. It features ultrafast splice and heating cycles, a 4.3-inch full touch LCD, automatic arc calibration, and integrated heater in a field-ready kit.

Buckleys WRP01 Wet Roof Pro’ is a roof leak detector for locating faults in wet flat roofing membranes using voltage gradient measurement across non-conductive surfaces over conductive substrates.