Search results for: 'match'

Karl Storz Hopkins 82530 B is a 30° forward-oblique rigid endoscope utilizing the Hopkins rod-lens system for superior brightness, contrast, and image quality. Designed for minimally invasive surgical visualization with autoclavable, durable construction.

Wohler 3838 Flexible Joint for 4.5 mm Rod adds flexible articulation to compatible rod systems for smoother navigation through tight inspection pathways and angled access points.

Allen-Bradley 193-BSB30 thermal overload relay delivers adjustable 2.0–3.0 A motor protection with Class 10 operation, manual or auto reset selection, and direct-mount Bulletin 193 form factor control.

ABB 1SVR427032R0000 switch mode power supply delivers 24 VDC output at 2.5 A from a 100–240 VAC input, with adjustable output voltage from 24–28 VDC and 60 W max load capacity for control and industrial power applications.

Brass 294-06-06 fitting delivers secure 3/8 in hose barb to rigid tube shank connections using push-lock engagement. Designed for fluid transfer systems requiring reliable, non-swivel straight-through connectivity in a compact brass form.

The INNO Instrument E-70 fusion splicer electrodes are official replacement components designed for compatibility with INNO View Pro, Ribbon, and X Series splice machines. Rated for up to 5,500 splices per set, they support stable arc discharge performance and scheduled maintenance intervals.

Fisher TW82HC 82.175 kHz underground line tracer for locating buried pipes and cables. Digital depth, azimuth, and signal current display with conductive and inductive tracing modes. Hard case included.

Fluke Networks CFM-TRC-S-MPO12P CertiFiber Max test reference cord set supports accurate optical loss testing of single-mode MPO12 unpinned fiber when used with CertiFiber Max OLTS.

The Eaton H2006B-3 is a Freedom NEMA heater coil set designed for thermal overload protection in motor control applications. This Class 20 standard trip heater pack supports selectable full load current settings from 1.79A to 2.9A via dial positions A–D and is supplied as a factory-calibrated set of three elements.

Fluke Networks TRC-SM-VERIFY-MPO12U is a reference-grade single-mode MPO12 Type A verification cord designed to confirm proper reference settings when testing unpinned MPO cables with CertiFiber Max systems.

Pomona 5523 Minigrabber Patch Cord Kit includes ten 24-inch 20 AWG test leads with gold-plated minigrabber clips, providing secure temporary jumper connections for terminals and wire-wrap posts.

Allen-Bradley 1336-RLOAD-SP2A load resistor module engineered for 1336 PLUS, PLUS II, FORCE, and IMPACT drives, providing controlled regenerative and braking energy dissipation in supported voltage ranges.

Fluke Networks SMC-9-SCST launch cable delivers 160m singlemode fiber for accurate OTDR testing, stable network connectivity, and compatibility with OptiFiber units.

Wohler A400/A500/E335 Quick Charger for Angled Jack delivers dependable charging support for compatible Wohler equipment, helping maintain readiness with a compact, purpose-built power solution.

Wöhler 1454 Brass Rod Connector with double-sided M10 thread provides a secure connection point for compatible rod-based inspection and cleaning system setups.

Wöhler VIS 2xx / 3xx Battery delivers 12 V NiMH power, 2600 mAh capacity, and up to 120 minutes of operation for compatible VIS inspection camera systems.

AEMC 2118.84 Spring-Loaded Kelvin Probe Set delivers accurate low-resistance measurements using 4-wire Kelvin methodology. Featuring pistol-grip probes, 25A current rating, and 10.33 ft leads for use with compatible micro-ohmmeters.

Olympus SA10-0L-IHC A10 phased array wedge with 0L longitudinal geometry, IHC housing, irrigation ports and carbide wear protection for A10-format phased array probes.

Phoenix Contact 2832771-HW16 FL Switch SF 8TX delivers reliable 8-port 10/100 Mbps industrial Ethernet expansion with plug-and-play setup and DIN-rail mounting.