Search results for: 'construction'

Made of high quality ABS material. Application: 3-Blade model RG-59/62/6. Overall Length: 4.1 in.

AEMC 2118.77 Kelvin Probes deliver 10A spring-loaded four-wire resistance testing with 10 ft leads for micro-ohmmeters using 4 mm safety terminals or 4–6 mm binding posts.

Allen-Bradley 100-C12ZA10 3-pole contactor brings IEC motor-control switching with a 220V DC coil, 1 NO auxiliary contact, and marked AC load ratings.

Leviton 3433-C locking connector delivers 30A, 120/208V 3ØY grounding connectivity in a 4-pole, 4-wire non-NEMA configuration for industrial cord connection.

Eaton C0200E2AFB delivers 200 VA industrial control transformer performance with multi-voltage primary input and 120/115/110 V secondary output for control circuit power.

General Electric B4A82S1F1V1 Type SBM Switch delivers compact rotary cam control for industrial panels, combining panel-mounted operation, double-break contacts, and 600 VAC/VDC, 20 A continuous switching capability.

Leviton CR20-I commercial-grade duplex receptacle rated 20A, 125V in NEMA 5-20R configuration. Ivory narrow-body design with side-wire termination and self-grounding clip. Qty 5.

The INNO Instrument FL-500-SC-UPC is a 500-meter single-mode fiber optic OTDR launch cable designed for accurate fiber link testing. Built with 9/125 µm OS2 fiber and SC-UPC connectors on both ends, it creates the necessary launch distance to measure insertion loss and reflectance at the first connection point.

The INNO Instrument CJ-11 is a vehicle power cable designed to operate and charge compatible INNO fiber fusion splicers from a standard 12V car cigarette lighter socket. It supports 9V–14V DC vehicle input and is compatible with select View and IFS series splicers and LBT battery packs.

Fisher TW82P-HC 82.175 kHz underground line tracer with passive power detection for locating buried pipes and cables. Digital depth, azimuth, and signal current display in weatherproof IP65 housing.

The ABB S271-K0.5A Miniature Circuit Breaker is a single-pole, DIN-rail mounted protection device from the System pro M S 270 series. It features a K-curve tripping characteristic with a 0.5 A rated current and 230/400 V AC rated voltage. Designed for cable and appliance protection, it provides thermal and magnetic trip mechanisms with a rated short-circuit breaking capacity of 6 kA in accordance with EN 60 898.

The Eaton P1-25/V/SVB is a 25 A, three-pole main switch from the Eaton Moeller® P1 series designed for rear mounting applications. It features a door-coupling rotary drive with a red rotary handle and yellow locking ring, and supports emergency switching off functionality. The switch is rated up to 690 V AC, provides IP65 front protection, and is lockable in the 0 (Off) position for secured isolation.

The Omron Automation F92A-C-1 is an M18 inductive coupler designed to transmit ON/OFF limit switch signals to compatible inductive proximity sensors without direct electrical contact. Using magnetic coupling between coils, it enables signal transmission across a 5 mm distance. The unit operates without a power supply and is prewired with a 2 m cable. Rated IEC IP67, it supports operation in environments exposed to oil and dust within specified temperature and humidity limits.

The Saft LS33600 is a 3.6 V primary lithium-thionyl chloride (Li-SOCl₂) D-size battery designed for long-term, low-to-moderate current applications. It provides a nominal capacity of 17.0 Ah, stable voltage output, and a wide operating temperature range from −60°C to +85°C. This non-rechargeable cell is commonly used in utility metering, industrial electronics, and professional equipment.

Allen-Bradley 800T-N26G green pilot light replacement cap for 30mm Bulletin 800T and 800H pilot lights. Designed for field replacement or completing assemblies without color caps.

Allen-Bradley 800T-XA contact block delivers 1NO/1NC switching for 30.5 mm Bulletin 800T and 800H operators, providing dependable control panel signaling in modular industrial systems.

Allen-Bradley 1771-A3B1 PLC-5 12-slot I/O chassis provides reliable backplane communication and power distribution for 1771 modules in panel-mounted industrial control systems.

Allen-Bradley 1492-CB1-H010 supplementary protector delivers 1-amp single-pole thermal-magnetic overcurrent protection for industrial control circuits using DIN rail mounting.

Fluke 700G29 pressure gauge calibrator measures up to 3000 psi with 0.05% accuracy, offering rugged, IP67 performance for fast, precise field calibration.

Fluke Networks TS52 PRO test set provides dial tone detection, caller ID, voltage/current display, DataSafe protection, and a rugged design for telecom line testing.

**Fluke 80PK-26 Type-K Temperature Probe** Experience precise temperature measurements with the Fluke 80PK-26 SureGrip Tapered Temperature Probe. Perfectly designed for technicians, this versatile probe excels in air and surface applications, featuring a tapered stainless-steel tip for easy insertion. With a broad measurement range of -40 to 816°C (-40 to 1500°F), it’s your go-to tool for demanding industrial, HVAC, and process environments. Enjoy secure handling with its SureGrip design, while ensuring compatibility with a variety of Fluke instruments. Elevate your measurement accuracy and productivity today!

Amprobe PM55A Pocket Multimeter offers AutoTect automatic AC/DC detection, non-contact voltage sensing, and versatile measurement functions in a compact design.

Fluke 1507 insulation tester delivers advanced megohm measurements, multiple test voltages, PI/DAR calculations, and safety features for industrial electricians.