Search results for: 'system'

The Mitsubishi FR-A7N-ETH is an internal Ethernet communication option card for Mitsubishi 700-series adjustable speed drives. It provides multiprotocol Ethernet connectivity for industrial automation networks and supports configuration and monitoring through an embedded web server interface.

The Telemecanique GV2-AE11 is a front-mounted auxiliary contact block with 1 normally open and 1 normally closed contact. Designed for TeSys GV2 and GV3 motor circuit breakers, it provides status signaling and control feedback using screw clamp terminals.

The Potter & Brumfield KHAU-17D11-24 is a general-purpose industrial plug-in relay with a 24 VDC coil and 4 Form C contact arrangement. Designed for socket mounting, it supports control and power switching applications requiring multiple changeover contacts.

Fluke Networks SRC-9-SCSC-KIT is a singlemode SC/SC test reference cord kit designed for accurate fiber testing with Fluke Networks testers. Includes four 2-meter SC-terminated reference cords.

The Murr Elektronik 23050 is a three-phase RC motor suppressor designed to reduce induced voltage peaks in AC motor applications. Rated for up to 575 VAC at 50/60 Hz and 4 kW engine power, it supports star-connected RC suppression and installation close to the interference source.

The Universal 827-SLH-TC-P is a magnetic instant-start fluorescent ballast designed to operate two slimline lamps on a 277V, 60 Hz power supply. It supports series lamp operation and is intended for replacement use in compatible commercial and industrial lighting fixtures.

The Allen-Bradley 800B-N5W is a white LED lamp designed for use with Bulletin 800B 16 mm illuminated push-button and pilot light operators. Rated for 120V AC operation, this LED bulb provides consistent white illumination with low power consumption and extended service life in industrial control panel applications.

The Allen-Bradley 800B-EAB is a 16 mm maintained square push button operator designed for light industrial and instrumentation applications. It features corrosion-proof plastic construction and gold-plated snap-action contact compatibility for reliable low-voltage switching when paired with Bulletin 800B contact blocks.

Fluke 301D-R AC/DC Clamp Meter delivers up to 600A current measurement in a slim, handheld design with a thin 10 mm jaw, backlit display, and essential electrical test functions for tight spaces.

Fluke T90 voltage tester delivers reliable two-pole AC/DC voltage and continuity testing from 12–690V. Designed for fast troubleshooting with clear LED indicators and rugged construction.

Fluke PM9082/001 dual banana jack to male BNC adapter set enables secure conversion between 4mm banana leads and BNC inputs for test and measurement applications up to 600V.

Fluke Networks ADP-MMC12TO32-1A MMC adapter coupler for verification and inspection of 12, 16, 24, and 32 fiber APC MMC cables when used with compatible Fluke Networks fiber test systems.

Fluke TL175-HV TwistGuard test leads deliver high-voltage current measurement with CAT III 1500V safety, adjustable 2mm probe tips, and heavy-duty construction for reliable multimeter testing.

The Allen-Bradley 442G-MABE1 Escape Release Module with Handle is a safety accessory for the Guardmaster 442G Multifunctional Access Box. It allows personnel to open a locked safety guard from inside a safeguarded area without tools, supporting emergency exit functionality.

Allen-Bradley 43GR-TMC25SL is a glass fiber optic cable designed for use with large aperture photoelectric sensors. It features a diffuse (bifurcated) sensing configuration, a TM right-angle threaded sensing tip, stainless steel flexible conduit sheathing, and a standard 36-inch length.

Allen-Bradley 43GR-TIS10SS is a 36-inch bifurcated glass fiber optic cable for diffuse sensing applications. It features a stainless steel flexible conduit, right-angle M6 threaded tip, and is designed for use with small-aperture photoelectric sensors in industrial environments.

The Bussmann DFJ-90 is a 90 A Class J high-speed, current-limiting drive fuse designed for protection of AC and DC drives and power semiconductor equipment. Rated 600 Vac and 450 Vdc, it provides high interrupting capacity and low let-through energy in branch circuits.

Phoenix Contact UT 6-HESILA fuse modular terminal block designed for 6.3 x 32 mm glass or ceramic fuses. Rated at 250 V and 10 A, this DIN-rail mount terminal block uses a screw connection method and includes an integrated LED fault indicator for fuse status monitoring. Supplied as a quantity of 10 units.

The Turck B8241-0/PG9 is a field-wireable M12 right-angle, 4-position female connector designed for sensor and actuator wiring in industrial automation. It uses a screw terminal connection, supports 250 V at 4 A, and accepts PG9 cable glands for secure, sealed installations.

The Moore Industries DCA/4-20MA/SH2/117AC-DPDT-GP is a DC current alarm trip module designed to monitor a 4–20 mA process signal and actuate relay contacts when a high alarm setpoint is exceeded. It operates on 117 VAC power and provides DPDT relay outputs for alarm signaling.

The Fisher R3570CX0022 is a pneumatic valve positioner repair kit intended for maintenance of Fisher 3570 Series pneumatic valve positioners. This kit supports servicing of positioners used in industrial control valve assemblies and is not a complete valve or positioner.

Pomona 4290 SMA Male to BNC Female adapter enables reliable 50-ohm RF signal interconnection for test equipment, antennas, and cables, using gold-plated contacts for consistent performance.

Amprobe ACDC-100 clamp-on multimeter measures high AC/DC current with inrush capture, capacitance testing, and a large easy-to-read display.

Amprobe DGC-1000A Ground Resistance Tester delivers fast clamp-on testing from 0.025–1500 Ω with true-RMS current measurement and onboard data logging.