Search results for: 'that'

Introducing the OWON AG1022 - Your Ultimate 2-Channel Waveform Generation Solution.

Sprecher + Schuh CS7E-31E control relay with attached CS7-PV auxiliary contact block. Rated for up to 690V AC, this 4-pole industrial control relay is used for switching control circuits in panel and machine control applications.

Flexco NC-36-1 conveyor belt hinge pin delivers a flexible 1/4 in nylon covered steel cable connection, pre-cut for 36 in belt width splices in compatible Flexco hinged fastener systems.

GAI-Tronics 13314-002 is a 16-ohm indoor/outdoor compression driver for compatible horn assemblies. It is rated for Div. 2 hazardous areas, features 1.375-18 UNEF horn threads, and carries a NEMA 4X enclosure rating.

Minebea NMB-MAT 4715KL-05T-B40 is a 24V DC axial cooling fan with 119 x 119 x 38.4 mm dimensions, 3200 RPM speed, and approximately 118 CFM airflow for industrial equipment cooling.

Action Instruments AP9046 DC output power supply with 120VAC input, 24VDC regulated output, plug-in 8-pin design, and current loop power supply capability for two-wire transmission applications.

INNO Instrument PAC-1002 BNC conversion adapter for safety BNC to banana connection, rated 600V CAT III and listed as an accessory for the SPAW7000 power analysis wavecorder.

Fisher SONDE-8K 8.2 kHz transmitter for tracing non-metallic pipes and locating blockages. Works with TW82 and TW8800 line tracers to send a detectable signal inside pipe systems.

Fisher SONDE-TW6 SR-81 is an 81.92 kHz pipe signal transmitter designed for use with TW6 line tracers. Inserted into non-metallic pipe or duct via push rod, it enables precise underground pipe tracing and blockage location.

The INNO Instrument LBT-3000 is an 11.1V, 3000mAh lithium-ion battery pack designed for compatible INNO fusion splicers including the M7, M9, A3, IFS-15M, and IFS-15M+. It provides 33.3Wh capacity and features an integrated LED charge indicator for field power management.

The Siemens 771-8STF2 is a Series 771 current-to-pneumatic transducer that converts a 4–20 mA DC input signal to a 3–27 psig pneumatic output. This standard-capacity unit provides 0.16 scfm output and is configured with terminal strip connection and F2 non-incendive hazardous location approval.

The INNO Instrument UN1COLK UN1CO Ladder Mount Work Platform is an ABS workstation designed for secure positioning on ladder rungs during fiber splicing operations. It provides a stable surface for INNO View series fusion splicers and common industry cleavers in elevated or confined environments.

Allen-Bradley 193-EPD is an E1 Plus separate mounting adapter that enables DIN rail or panel installation of compatible electronic overload relays, improving control panel layout flexibility and thermal performance.

Allen-Bradley 193-EPM2 is a DIN rail and panel mount adapter that enables remote mounting of compatible Bulletin 193-E solid-state overload relays, improving layout flexibility in industrial motor control panels.

General Electric 193X532ABG04 field service control module for control/repair replacement use in compatible GE industrial systems. Identified by model number for accurate part matching.

Fluke TiS75+ thermal imager delivers 384x288 resolution, 27Hz imaging, dew point alarms, and voice annotation to simplify industrial and building inspections.

Allen-Bradley 100-C12D10 contactor with 193-EA1DB E1 Plus overload relay provides IEC motor switching with electronic overload and phase-loss protection for reliable industrial motor control.

Allen-Bradley 1492-CB2 H 200 is a 2-pole DIN-rail supplementary circuit breaker designed for industrial control panels, providing reliable thermal-magnetic overcurrent protection with an H-curve trip characteristic.

Fluke FLK-II500 acoustic imager lets technicians visualize sound to locate gas and vacuum leaks fast with 2–52 kHz detection and a 7-inch touchscreen display.

The Fluke PRV240 is a portable, battery-powered proving unit that supplies a stable 240 V AC/DC source to verify multimeter and tester operation before and after energized work. It helps meet safety requirements, reduces risk, and ensures instruments are functioning properly in the field.