Search results for: 'vac'

AEMC MN255 AC Current Probe: Switch-selectable 20A/200A ranges, 100mV/10mV output, banana plug lead, UL approved for precise low and high current use.

The Eclipse Tools Receptacle Tester for Standard Outlets tests for correct wiring. It can be plugged in to check outlet polarity, and a light pattern is displayed to indicate status. This is a UL approved and RoHS compliant tester.

AEMC 2135.58 Model 6424 Ground Resistance Tester delivers digital 3-point and 2-point ground resistance testing with AC/DC voltage measurement and auto-ranging operation.

Acopian 24EB10 is a mini encapsulated linear regulated AC-DC power supply delivering 24 VDC at 0.100 A through screw terminals for compact chassis, cabinet, and bench power integration.

Allen-Bradley 1771-IAD PLC-5 digital input module with 16 AC/DC inputs. Designed for 120V industrial signals, reliable discrete device monitoring, and seamless integration into 1771 I/O chassis.

AEMC 6529 Digital Megohmmeter Multimeter: Compact, rugged insulation tester with PI/DAR, continuity, voltage & resistance tests—ideal for field use.

Built-in white LED illumination light Detect AC voltage 90~1000 VAC with no metal contact Compact size with clip fits into pockets or tool pouches Red LED and audible alarm if voltage is present Non-conductive outer surface to avoid high voltage shock Powered by two 1.5V AAA batteries (not included) CAT IV 1000V Safety rating

Square D 9001SKP1C9 delivers 30 mm pilot light signaling with a red domed plastic lens, incandescent BA 9s lamp, 110–120 V AC supply, and screw clamp terminals.

Lenze EVF8244-E delivers precise 3 kW motor control with stable performance, advanced vector features, and compatibility across the 8200 Series. Ideal for industrial drives.

Honeywell LSZ7A1A side rotary limit switch delivers durable HDLS performance with 1NO/1NC contacts for industrial machinery and actuator position sensing.

Siemens 3RH1131-1AK60 contactor relay delivers 3NO+1NC switching in a compact SIRIUS S00 format with a 110V 50 Hz / 120V 60 Hz AC coil and screw-terminal connection for control circuit integration.

Eagle Eye HGD-3000 series hydrogen gas and smoke detector monitors battery rooms and remote shelters with automatic fan control, local alarm, and relay outputs.

Hubbell HBL7593 twist-lock connector delivers secure 15A 125V power connectivity with NEMA ML-2R configuration for reliable 2-pole 3-wire grounding applications.

Cole-Parmer EW-80550-00 is a 100 mm single pen chart recorder designed for process signal monitoring. It supports selectable millivolt and voltage full scale ranges with adjustable chart speeds. Internal zero and span controls allow calibration for recording applications.

The Leviton 2453 is a 20 Amp, 277/480 Volt AC locking connector with a NEMA L19-20R configuration. It features a 4-pole, 4-wire, non-grounding design for 3-phase WYE applications. The connector uses an impact-modified nylon body with solid brass blades and contacts.

The Turck U-56934 is a Mini-Fast double-ended industrial sensor cordset designed for actuator and sensor connections in industrial automation environments. It features a straight male and right-angle female 7/8"-16 connector configuration, a 0.3 m cable length, and a yellow high-flex jacket.

The BITE3 is a tool used to determine the health of lead-acid batteries up to 2000 Ah. Its measurements can provide the best basis for evaluating the overall health of batteries from terminal plate to terminal plate and, to a lesser extent, the charger. The BITE3 includes PowerDB LITE Management Software.

Johnson Controls P10BC-7C low pressure control, SPDT, 1-stage, 3 to 20 psi range, 12 psig factory setting, 2 psi switch differential, with barbed fitting.

The Mitsubishi CP30-BA 1-Pole 10A M-Curve Circuit Protector is a compact supplementary circuit breaker designed for protection of low-capacity control circuits, motors, and transformers. It supports AC 250 V and DC 65 V operation and mounts on a standard 35 mm DIN rail using screw terminals.

The Advance L-220-F is a magnetic reactor ballast designed to operate two 15W or 20W preheat fluorescent lamps at 120V AC, 60 Hz. It regulates lamp current using an inductive core and requires external starters for lamp ignition in preheat fluorescent systems.

The Allen-Bradley 1734-TBS is a POINT I/O terminal base assembly with an 8-position spring-clamp removable terminal block. Designed for compact distributed I/O systems, it supports DIN-rail mounting, removable wiring, and compatibility with multiple POINT I/O modules.

Fluke 80PK-1 Type K beaded thermocouple probe delivers fast-response air and surface temperature measurement using a miniature connector. Designed for general-purpose diagnostics with compatible Type K instruments.