Search results for: 'carries'

AEMC CASE-SC Clamp Meter Case: Soft replacement case with handle for models 401, 403, 405, 601, 603 & 605. Protects and carries with ease.

The Harold Beck & Sons 11-1373-01 is a 7 Amp fast-acting fuse used for overcurrent protection in Digital Control Module (DCM) circuits. Designed for use within Beck electric actuator systems, this listing includes a quantity of five identical fuses.

The Bussmann JKS-40 is a Class J fast-acting, current-limiting fuse rated at 40 A and 600 Vac. It is designed for rapid response to short-circuit conditions in industrial and commercial electrical systems requiring high interrupting capacity.

The PROFLO PFRCKU is a 6-inch, two-bolt pipe repair clamp designed for use on 2-inch pipe. It features a 430 stainless steel band, NBR gasket, and plated hardware, supporting a 150 psi pressure rating and a working temperature range from -30°F to 180°F.

The PLS 180G RBP KIT is a self-leveling green cross line laser level designed for layout and installation tasks. It provides ≤1/8 in accuracy at 30 ft with 180° horizontal and 130° vertical fan angles. The kit includes a rechargeable battery pack, alkaline battery pack, magnetic L-bracket, and universal wall/ceiling bracket.

The Eaton Bussmann DFJ-30 is a 30A Class J high speed, current-limiting drive fuse designed to protect AC and DC drives and power semiconductor devices. Rated up to 600 Vac and 450 Vdc, it provides very low I²t let-through energy and high interrupting capacity for demanding industrial applications.

Allen-Bradley 43GR-TIS10SS delivers glass fiber optic sensing connectivity for small-aperture photoelectric sensor systems, with a stainless steel conduit and M6 x 0.75 threaded TI sensing tip.

Eaton Cutler-Hammer C320KGS1 is a Freedom Series side-mounted auxiliary contact block with 1NO contact configuration for NEMA sizes 00 to 2 and IEC sizes A to K.

GAI-Tronics 13314-002 is a 16-ohm indoor/outdoor compression driver for compatible horn assemblies. It is rated for Div. 2 hazardous areas, features 1.375-18 UNEF horn threads, and carries a NEMA 4X enclosure rating.

The Fluke i400s-EL-3PK AC Current Clamp 3 Pack extends the current measurement range of digital multimeters, power quality analyzers, and portable oscilloscopes. It supports measurements up to 400 A with selectable 40 A and 400 A ranges and 10 mV/A or 1 mV/A output. Rated CAT IV 600 V / CAT III 1000 V.

Bussmann JP60030-3PR is a 3-pole Class J pyramid fuse block rated 30 A and 600 V for panel-mounted circuit protection using LPJ, DFJ, and JKS fuses in control and power distribution assemblies.

The Emerson DeltaV KL4502X1-BA1 (12P4990) is a CHARM standard terminal block designed for use with the DeltaV S-series Electronic Marshalling system. It provides the physical interface for field wiring and supports installation of CHARM (Characterization Module) components within DeltaV control architectures.

The Fluke 87V MAX True-RMS Digital Multimeter is designed for electrical measurement in demanding environments. It measures up to 1000 V AC/DC and 10 A AC/DC, with True-RMS accuracy for non-linear signals. This CAL version includes NIST traceable calibration with data, along with TL175 test leads, temperature probe, holster, and installed batteries.

The Ferraz Shawmut UltraSafe USCC2 P216489 is a 2-pole modular fuse holder rated for 30A and 600 VAC/VDC for Class CC fuses. Designed for DIN rail mounting, it features IP20 finger-safe protection, pressure plate terminals, and a 200 kA SCCR for industrial control panel applications.

The PLS 6R RBP KIT is a self-leveling cross line and point red laser level designed for plumb, level, and square layout applications. It provides 180° horizontal and 130° vertical fan angles with ≤1/8 in accuracy at 30 ft. This kit includes the RBP5 rechargeable Li-ion battery pack, alkaline battery pack, floor stand, magnetic L-bracket, UB9 wall/ceiling bracket, and reflective target.

The PLS 5G is a self-leveling five-point green laser level designed for plumb, level, and square point layout. It delivers ≤1/8 in accuracy at 30 ft (≤3 mm at 10 m) and features a pendulum lock for transport and tilt mode operation. With IP54 protection and a Class 2 green beam (525 nm), the PLS 5G supports interior layout applications up to 100 ft working range.

The Ferraz Shawmut USCC3I is a 3-pole ULTRASAFE modular Class CC fuse holder rated for 600 VAC and 30 A. It accepts Class CC fuses only, incorporates integrated blown-fuse indicators, and mounts on standard 35 mm DIN rail for industrial electrical panels.

The PLS 3X360R KIT is a red three-plane laser level featuring 360° horizontal and dual 360° vertical fan angles for plumb, level, and square layout. The kit includes the 3X360R tool, RBP5 Li-ion rechargeable battery pack, power supply, magnetic L-bracket, red reflective target, canvas pouch, and blow mold case.

Philips Advance AmbiStar RELB-2S40-N delivers reliable, energy-efficient rapid-start operation for T12 lamps. Ideal for 120V fixtures needing a dependable electronic ballast.

Fluke Networks carrying case with strap protects tools during travel, offering durability, comfort, and easy portability.

AEMC 2138.58 carrying strap keeps compatible C.A 6116, C.A 6116N, and C.A 6117 testers ready for handheld transport with a fitted accessory design.

Fluke Networks 11291400 pouch carrying case provides durable, belt-clip storage for ProTool IS40 tools with neoprene construction.

AEMC 2135.83 is a hard replacement carrying case built for AEMC Model 6474 storage and transport, with a handle-equipped case format and tray not included.