Search results for: 'tensile'

Hydrajaws M2000 Material Bond Tester Kit brings precise 25kN pull-off testing to concrete, screeds, coatings, laminates, plastics, paints, and enamels in lab, workshop, and on-site workflows.

Hydrajaws M2000 scaffold tie tester kit supports 0-25kN pull testing for scaffold anchors, with analogue and digital gauge options.

The Hydrajaws Wall Tie Tester Kit MK2 is used for testing all types of remedial wall tie. Trusted by market-leading companies, the Wall Tie Tester Kit is an essential tool for carrying out testing procedures in line with BRE Digest 401. Manufactured to exacting high standards, the Hydrajaws Wall Tie Tester Kit contains a small bolt tester adaptor and two threaded rod adaptors (M5 and M6) to test up to a maximum tensile load of 10kN. The three-legged load spreading bridge keeps reaction loads away from the fixing allowing results to be more consistent.

The INNO Instrument SC-SM-UPC-30S is a 10-pack of SC single-mode UPC splice-on connectors designed for 3.0mm jacketed fiber. Using fusion splice termination, these short boot SOC connectors provide stable optical performance without field polishing or index-matching gels.

The INNO Instrument SC-SM-APC-30 is a 10-pack of SC-type single-mode splice-on connectors designed for 3.0mm fiber cables. Featuring APC polish and pre-polished factory ferrules, these connectors support fusion splice termination with low insertion loss and high return loss performance.

The INNO Instrument SC-SM-UPC-09 is a 10-pack of single-mode SC/UPC splice-on connectors for 900µm fiber. Designed for fusion splicer termination, these connectors eliminate polishing, adhesives, and mechanical splicing. With typical ≤0.2 dB insertion loss and ≥55 dB return loss, they support G.652D and G.657A2 fiber types.

Hydrajaws 200-009 M2000 PRO Imperial Digital Tester Kit delivers 0-25kN/5620lbf pull testing for anchors and fixings with a digital gauge, 50mm stroke, and a universal adaptor set.

CommScope FPCXL3LC22RF009 Optical Cable: High-performance LazrSPEED® 550 OM4, 8 fiber, aqua jacket. Perfect for fast, reliable indoor data transmission.

The INNO Instrument SC-SM-UPC-30 is a 10-pack of SC/UPC single-mode splice-on connectors designed for 3.0mm fiber cables. Each connector is factory pre-cleaved and pre-polished to support consistent optical performance, with typical insertion loss of 0.15 dB and return loss ≥55 dB.

The INNO Instrument SC-SM-APC-30S is a 10-pack of single-mode SC/APC splice-on connectors designed for 3.0mm fiber cables. Featuring a short boot configuration, these pre-cleaved and pre-polished connectors enable fusion-spliced terminations using compatible INNO Instrument fusion splicers.

The Hydrajaws Safety Lifeline Cable Tester Kit1 (Frame Only) for operators who already own an M2000 Tester, enables engineers to validate the installation of swaged components of new or existing engineered lifeline systems to ensure compliance with BS 7883 up to a maximum tensile load of 25kN.

The Hydrajaws M2000 Safety Harness & Eye Bolt Tester Kit is engineered for professionals who need to meet the demands of BS 7883:2019 for eye bolt anchor fixings used with personal fall protection and anchorage devices (BS EN 795). Compact, rugged, and easy to use, this complete kit delivers precise, repeatable test results whether on site or in the workshop.

Bently Nevada 330102-00-30-05-02-00 is a 3300 XL 8 mm proximity probe with 3/8-24 UNF thread, armor, and 5.0 m total length for non-contact vibration and displacement measurement in rotating machinery systems.

Revolutionize your anchor testing with the Hydrajaws M35+! This lightweight, modular pull tester features Easi-Effort® technology for anchor and eyebolt testing up to 35kN (7,868 lbf) and swaged components on engineered lifeline systems testing up to 20kN (4,496 lbf).

Clark Wire SMPTE Fiber Camera Cable: 250' bend-insensitive, extra-flexible, high-performance cable for remote, ENG, and studio use. Built for durability and reliability.

High quality bit at an economical price Made from S-2 tool steel with a hardness of HRC 59°~ 61°

Brady WML-311-292 labels offer durable, self-laminating wire ID for 10–6 AWG wires, using B-292 vinyl for clear, long-lasting identification with Brady printers.

The Hydrajaws standard digital gauge provides many advantages over the standard analogue gauge including more accurate and clearer results.

Discover the Hexatronic Ribbonet Air Blown Fiber Installation Tool. This portable, efficient tool uses compressed air and an electric motor for fast fiber installations. Perfect for microduct applications, it ensures quick and reliable setups. Learn more about its benefits and how it can enhance your fiber optic installations today!

Sumitomo TYPE-72C Fusion Splicer: Fast, precise fiber splicing with high-definition core alignment. 5" touch screen, automatic fiber detection, and 300 splice programs for top performance

Introducing the Eclipse Tools Cable Tie in an extended length and robust design. This package includes 100 cable ties, each measuring a generous 11-4/5 inches in length and a sturdy 0.19 inches in width. These black cable ties are built for demanding applications, offering a secure and efficient solution for your cable management needs. Keep your cables organized and well-bundled with this pack of 100 high-quality cable ties.

Fujikura 90S+ Fusion Splicer: Fast, precise splicing with 300 cycles. Active core alignment, long battery life, and versatile for all fiber types. Durable & field-ready.

Fujikura 12S fusion splicer with CT-06 cleaver offers compact, rugged fixed V-groove single-fiber splicing, dual-camera alignment, 4.5" LCD, and long-life electrodes for reliable field fiber work.