Search results for: 'with aad'

Eagle Eye DLV-Pro Data Logging Voltmeter for recording, viewing, and analyzing cell voltages from 0-20 VDC with on-site statistical, graphical, and discharge test analysis.

The Siemens 771-8STF2 is a Series 771 current-to-pneumatic transducer that converts a 4–20 mA DC input signal to a 3–27 psig pneumatic output. This standard-capacity unit provides 0.16 scfm output and is configured with terminal strip connection and F2 non-incendive hazardous location approval.

Allen-Bradley 1769-L33ER CompactLogix 5370 L3 controller delivers Ethernet/IP connectivity and modular Compact I/O expansion for medium-scale industrial automation systems.

Toshiba VF-S11-4015PL-WN industrial inverter delivers precise 3-phase motor speed control for 380–500V systems, supporting 1.5kW motors with compact design, high torque output, and flexible control modes.

Siemens 6EP1 961-2BA00 delivers reliable 24V load monitoring with selective shutdown, fast fault diagnosis, and SITOP compatibility for industrial automation.

Shindengen F020158R.0831 rotary solenoid delivers precise DC-driven motion for industrial and automation systems, ideal for assemblies like the M100AIE/U/H.

Allen-Bradley 1771-OFE2 is a PLC analog output module built for 1771 I/O systems, delivering four isolated current outputs, selectable scaling, and block transfer operation for industrial control applications.

Allen-Bradley 1794-TB3 FLEX I/O terminal base provides 16 I/O wiring points with screw-clamp connections, integrated FLEXBUS backplane support, and DIN-rail mounting for FLEX I/O systems.

Allen-Bradley 1746-OW8-SERA delivers reliable 8-point relay output control for SLC 500 systems, supporting AC/DC loads with flexible mixed-voltage compatibility.

Modicon DEP 6728-042.272572 209 115VAC 8-point input module for legacy Modicon 984 PLCs, providing isolated signal acquisition for reliable industrial control integration.

The Yamatake Honeywell J-HAM10 is an industrial analog input module used in control and automation systems. The module operates on 24 V DC power with a current draw of 450 mA and is manufactured in Japan. Model and electrical ratings are confirmed directly from the unit labeling.

The Yamatake Honeywell J-MBU01 is a base unit backplane used in legacy distributed control systems. It provides a multi-slot platform for installing compatible control and I/O modules within an industrial control cabinet. The unit shown is the backplane only, with no modules installed.

The Dwyer 1638-2 is a large diaphragm pressure switch designed for low-pressure applications with an operating range of 1 to 3 inches water column (WC). This configuration supports pressure-actuated switching within defined low differential ranges.

The Emerson Ovation 5X00070G04 is an analog input module used within the Ovation Distributed Control System. It is designed for millivolt-level signal acquisition and supports selectable ±20 mV, ±50 mV, and ±100 mV input ranges across eight analog input channels.

Toshiba VFS11-4015PL-WN VF-S11 inverter delivers precise three-phase motor speed control with vector performance, built-in EMI filtering, and RS485 Modbus communication for industrial automation systems.

The GE DS3800XTFP is a thyristor fan-out adapter board for Speedtronic Mark IV turbine control systems. It distributes logic-level signals through eight red jack connectors and a 6-pin terminal, supporting structured signal routing within MKIV control racks.

Honeywell 513-04476-175 analog output termination board delivers eight 4–20 mA outputs for precise field device control in Honeywell UCN and TDC 3000 systems with conformal-coated reliability.

The Honeywell 620-1690 is a processor rack chassis used in the legacy IPC 620 / ISSC 600 PLC system. It provides the physical backplane and power distribution framework for processor, I/O, and communication modules in rack-mounted industrial control installations.

The Schneider Electric PC-A984-141 is a Modicon 984 series PLC processor module designed for industrial automation and control applications. It operates on 24 VDC, provides 2 MB memory capacity, supports up to 16,384 discrete I/O points, and includes communication ports, LED status indicators, and battery-backed memory.

Bently Nevada 330930-060-02-00 is a 3300 XL NSv 6.0 m extension cable for proximity transducer systems. One cable assembly is included, as shown.

ABB IEMMU11 module mounting unit provides rear-mounted chassis support, power distribution, and backplane communication for up to 12 INFI 90 OPEN Symphony control system modules.

Fluke TLK282 Test Lead Kit: Deluxe SureGrip leads with back probe pins and hook clips, ideal for automotive diagnostics up to 60 V DC.

HYDAC HDA 3405-C-400-130 pressure transmitter with 0 to 400 bar relative pressure range, G 1/4 A process connection, and 4-pole Binder series 714 M18 electrical connection.

Metso Automation PDP406 Distributed Processing Unit for MAX DCS delivers real-time control, alarming, and data processing for industrial automation systems requiring reliable distributed architecture.