Search results for: 'mechanical model'

Agastat 7014SC delivers reliable 2–20s on-delay timing with 4PDT contacts for industrial automation, offering durable electropneumatic performance and high repeatability.

Banner LM3 photoelectric sensor logic module delivers ON-OFF logic with LIGHT/DARK operate selection for MULTI-BEAM 3- and 4-wire sensors.

The Yamatake Honeywell J-MBU01 is a base unit backplane used in legacy distributed control systems. It provides a multi-slot platform for installing compatible control and I/O modules within an industrial control cabinet. The unit shown is the backplane only, with no modules installed.

Allen-Bradley 871C-C5A18 inductive proximity sensor delivers reliable non-contact metal detection with a 5 mm sensing range, normally closed output, and AC 2-wire operation for industrial automation applications.

The FANUC A03B-0819-C001 ABU10A is a 10-slot horizontal I/O base unit designed for industrial automation systems. Part of the A03B-0819 series, it provides a compact chassis for mounting multiple I/O modules and supports scalable system configuration within control cabinets.

York 031-00005-000 thyristor SCR module designed for HVAC power control circuits. Functions as a latching switch within York chiller and VSD control boards, ensuring stable electrical switching performance.

Commtest vb7 vibration data collector for route-based machinery vibration measurement, spectrum and waveform analysis, balancing, and condition monitoring with firmware v2.1.8 and IMI ICP accelerometers.

HYDAC HDA 3405-C-400-130 pressure transmitter with 0 to 400 bar relative pressure range, G 1/4 A process connection, and 4-pole Binder series 714 M18 electrical connection.

Fluke 810 Vibration Tester delivers on-board machine diagnostics with tri-axial vibration measurement and laser tachometer feedback, helping identify fault type, severity, and location in rotating equipment.

ABB ACH401603035 HVAC variable frequency drive delivers precise fan and pump speed control in 480V three-phase systems, optimizing airflow and fluid movement using ACH400 HVAC-focused drive architecture.

The Dwyer AP-7021-153-39 is a diaphragm operated pressure switch with an adjustable 10 to 125 psig range. It uses an SPDT snap acting switch in a general-purpose enclosure and is designed for air, non-corrosive gases, or compatible liquids.

Allen-Bradley 1336-T-SP5A control transformer designed for 1336 PLUS, PLUS II, Force, and Impact drives, supporting 150–250 HP systems at 460 VAC with stable internal control power delivery.

Allen-Bradley 1336-CONV-SP4A converter power module designed for 1336 series adjustable frequency AC drives. Supports three-phase motor control applications within compatible 1336 drive platforms.

Fluke 805 FC Vibration Meter delivers accurate, repeatable machine and bearing health checks with severity-scaled readings and mobile app integration.

Omron CJ1W-PD025 PLC power supply unit brings 24 VDC input power to CJ-series control racks with 5.0 A at 5 VDC, 0.8 A at 24 VDC, and 25 W capacity for modular automation systems.

The Carlo Gavazzi IA12ALF02POM1 is an M12 flush-mount inductive proximity sensor with a 2 mm rated operating distance. This long-body version features a nickel-plated brass housing, M12 plug connection, PNP normally open output, 10–40 VDC operating voltage, and IP67 environmental protection.

Carlo Gavazzi CA18CLN12NA capacitive proximity sensor delivers adjustable 3–12 mm detection with 10–40 VDC operation, supporting reliable material detection across industrial automation and level sensing applications.

The Ovation 5X00481G01 OCR1100 Processor Module is a controller Atom CPU module designed for industrial automation and control systems. It features an Intel® Atom™ D525 1.8 GHz processor, 2 GB DDR3 SDRAM, and 4 GB eMMC storage, operating on Windows Embedded Standard 7. The module supports extended temperature operation from -40°C to +70°C.

The Emerson KJ2005X1-BK1 SX Controller is designed for use within the DeltaV™ S-Series Digital Automation System. It supports hazardous area installations with ATEX, IECEx, FM, and Class I Div 2 approvals. The unit operates on +5 VDC local bus power and is specified for industrial environments from –40°C to +60°C.

Panasonic TH2376 is a TH23 series panel-mount hour meter rated for 115 to 120V AC at 60 Hz. It features a reset function and displays elapsed time from 0 to 9999.9 hours in 0.1-hour increments. Designed in DIN 48 size, it includes mounting bracket and decorative nut.

WEG SSW050023T2246EPZ soft starter delivers controlled 3-phase motor starting and stopping using DSP technology. Compact SSW05 Plus design provides smooth acceleration, deceleration, and built-in motor protection.

CTC ACC199-130 industrial accelerometer with 100 mV/g output for vibration monitoring. Compact 3-pin sensor design for reliable machine condition analysis.

The Emerson KJ2003X1-BK1 SD Plus Controller is a DeltaV series industrial automation component designed for distributed control applications. It supports 12 VDC local bus power at 75 mA and 24 VDC bussed field power at 150 mA, with 24 VDC field circuit at 5 mA per channel. The controller operates in ambient temperatures from -40°C to +70°C and supports industrial vibration and shock tolerance ratings.

Siemens TM-E15C24-01 terminal module for ET 200S provides secure spring wiring, supports pre-wiring, and pairs with all 15mm ET 200S electronic modules.