Search results for: 'Gattouz'

Siemens SIMATIC S7 memory card for S7-400 systems. This long-design Flash-EPROM card provides 1 Mbyte of non-volatile storage for user programs and data. Designed for 5 V operation and manufactured in Germany for use with SIMATIC S7-400 automation platforms.

The Yamatake Honeywell J-DOM10 is an industrial I/O module identified by the manufacturer marking “J-DOM10.” The unit features a 32-position screw terminal block and front-panel status indicators labeled RDY and ACT. Manufactured in Japan, this module is a legacy component commonly encountered in installed industrial control systems.

The Yamatake Honeywell J-AOM10 is an analog output module designed for use within industrial control systems. The module operates on DC 24V power and features terminal screw connections for field wiring. It is labeled and manufactured under the Yamatake Honeywell brand.

Westinghouse Emerson 5X00226G01 is an Ovation I/O Interface Module for distributed control system signal interfacing, data acquisition, and communication between the control system and connected field devices.

The Opto 22 AD6T is a single-channel, optically isolated analog input module designed for 0–5 VDC signals. Built in Opto 22 G1 (Standard) form factor, it provides 12-bit resolution, 4,000 VRMS isolation, and compatibility with Standard analog I/O racks for industrial control systems.

The Honeywell 621-9938RC is a dual-port Serial I/O Module for the IPC 620/621 Programmable Controller System. It provides redundant serial communication, configurable I/O point allocation, DIP switch configuration, front status LEDs, and supports hot-swappable operation in redundant serial I/O architectures.

The Honeywell 620-0081 Highway Interface Module (HIM) is a communication module used to connect Honeywell IPC 620 series controllers with TDC 2000/3000 Distributed Control Systems. It supports Data Hiway communication at 1.25 Mbps and is designed for rack-mounted installation in IPC 620 systems.

Honeywell 380-01873-100 I/O Interface Module enables remote monitoring and control of field devices using RS485 Panel Bus™ communication with 34 configurable I/O points for scalable building automation systems.

This CCC Series 4 temperature input module set includes one IOM TCW (I-1/201-2/200) and one EIOM TCW (E-1/202-3/200). Both modules are designed for 3-wire GDC RTD temperature inputs and chassis mounting within CCC Series 4 control systems.

The Schneider Electric PC-A984-141 is a Modicon 984 series PLC processor module designed for industrial automation and control applications. It operates on 24 VDC, provides 2 MB memory capacity, supports up to 16,384 discrete I/O points, and includes communication ports, LED status indicators, and battery-backed memory.

ABB IEMMU11 module mounting unit provides rear-mounted chassis support, power distribution, and backplane communication for up to 12 INFI 90 OPEN Symphony control system modules.

Metso Automation PDP406 Distributed Processing Unit for MAX DCS delivers real-time control, alarming, and data processing for industrial automation systems requiring reliable distributed architecture.

Yamatake-Honeywell J-DIM00 is a DC 24V digital input module for AMC automation systems, enabling reliable field signal monitoring and seamless integration with compatible industrial and marine control platforms.

Emerson Phoenix Contact 1X00102H01 is an Ovation DCS power distribution module that delivers protected 5V, 12V, and 24V DC power to controller and I/O modules with diagnostic support.

Allen Bradley 1734-MB provides reliable POINT I/O mounting w/ removable terminal block, DIN rail installation, and secure backplane connection for modular expansion.

The Westinghouse 5X00070G33 delivers precise multi-channel voltage signal acquisition for Ovation DCS environments, supporting ±5V and ±10V inputs with isolated channels and high-resolution data capture for reliable industrial monitoring.

GE Fanuc IC660EBA106K GENIUS I/O Block Expansion Module for distributed industrial control systems, with labeled multi-point analog input connections and GENIUS series integration.

Emerson DeltaV KJ3001X1-BD1 discrete input module for 120 VAC dry contact monitoring. This 8-channel module provides front-panel status indication and installs on DeltaV I/O hardware.

AutomationDirect D2-08NA-1 is an 8-point AC input module for DL205 PLC systems with 80-132 VAC input range, 47-63 Hz operation, removable terminal connection, and logic-side status indication.

The Schneider Electric Modicon Quantum 140XCP51000 is a dummy module with integrated terminal strip door designed for unused discrete I/O slots in Quantum PLC racks. It maintains rack mechanical integrity, preserves airflow for cooling, and protects internal backplane components from dust and contact.

The GE Fanuc IC693CHS392G is a 10-slot expansion I/O baseplate for the Series 90-30 PLC platform. It features a 25-pin D-type expansion connector, rack address DIP switch, and supports local I/O expansion up to 50 feet. Designed for use with compatible CPU baseplates.

The Emerson KL2101X1-BA1 CHARM I/O Card (CIOC) is a DeltaV™ Electronic Marshalling subsystem component designed for industrial automation environments. It supports hazardous area installations and operates within -40 °C to +70 °C ambient conditions per manufacturer documentation.

The ABB Bailey IMASI02 is an Analog Slave Input module for the Infi 90 Process Management System. It converts analog field signals into digital data for processing by a Multi-Function Processor and interfaces up to fifteen process signals through a single MMU slot.