Search results for: '2.0'

AEMC 6472 Ground Resistance Tester Kit: Precision testing for soil resistivity, bond resistance, and earth potential with a 300ft (91.44m) cable and USB software support.

AEMC 6472 Digital tester measures ground, bond resistance, soil resistivity, step & touch potential with DataView software for easy analysis.

AEMC 2135.60 Ground Resistance Tester provides ground resistance, soil resistivity, bond resistance, current, and voltage measurement capabilities with auto-ranging operation up to 99.99 kΩ.

3 5/6 digits 5999 counts 0.5% best accuracy Dual display with analog bargraph Auto/Manual ranging USB data upload Measurement Range DC Voltage (DCV) 600m/6/60/600V ±(0.5%+4d), 1000V ±(1.0%+6d) AC Voltage (ACV) 6/60/600V ±(0.8%+10d), 750V ±(1.0%+10d) DC Current (DCA) 600μ/6000μA ±(1.0%+10d), 60m/600mA ±(1.0%+10d), 6/10A ±(1.2%+10d) AC Current (ACA) 600μ/6000μA ±(1.5%+10d), 60m/600mA ±(1.5%+10d), 6/10A ±(2.0%+15d) Resistance 600Ω ±(0.8%+5d), 6k/60k/600k/6MΩ ±(0.8%+4d), 60MΩ ±(1.2%+10d) Frequency 100/1000Hz ±(0.5%+4d), 10k/100kHz ±(0.5%+4d), 1M/30MHz ±(0.5%+4d) Capacitance 40nF±(5%+30d), 400n/4μ/40μF±(3.5%+8d) 200μF±(5.0%+10d) Temperature -20~400˚C(0~750˚F) ±(1.0%+5d), 400~1000˚C(750~1832˚F) ±(1.5%+15d) Continuity with Buzzer Yes Diode Test Yes Transistor Test Yes Power Source AAA(1.5V)×2pcs (Not included)

The INNO Instrument SPA3200 is a 3-channel digital power meter built for precise power consumption testing in R&D, automated assembly lines, and power test benches. It combines high measurement accuracy, a wide direct-input range, real-time waveform display, harmonic analysis, and internal data storage in a compact semi-rack design.

AEMC MN261 AC Current Probe: Selectable 20A/200A ranges, BNC output, 100mV/10mV per amp, wide frequency response, ideal for oscilloscopes.

Flexible Rogowski AC current sensor with 24" loop, measures up to 30,000A. Dual output 1mV/A and 0.1mV/A. Waterproof IP65 sensor, shape memory design. BNC adapter #2118.46 required for BNC input.

INNO Instrument SCTX200 pass-through current sensor with 0-200A DC range, 200A peak AC range, DB9 interface, ±12V to ±15V supply, and 28 mm aperture.

Fluke 1734/B Energy Logger: Accurately log three-phase electrical data with Fluke Connect, Wi-Fi, and Bluetooth for real-time energy monitoring.

INNO Instrument SCTH200 pass-through current sensor with 0–200A DC range, 200A peak AC, DC to 500kHz bandwidth, DB9 connector, and Φ28mm aperture.

AEMC AmpFlex® Rogowski coil current probe with 36" flexible loop. Measures up to 6000A AC with 1mV/A and 0.1mV/A dual output. Waterproof IP65 sensor. Requires adapter #2118.46 for BNC input.

High-performance AEMC JM861 AC current probe with 3 ranges (30A, 300A, 3000A), low phase shift, BNC output, ideal for oscilloscopes & power quality analysis.

Fluke 1732/EUS Energy Logger: Log voltage, current, and power with 600V CAT IV safety rating and remote data access via the Fluke Connect app.

The AEMC 2150.20 is a portable, battery-powered instrument that combines a 20 MHz two-channel isolated oscilloscope, dual 8000-count TRMS multimeter, power measurements, harmonic analysis (up to the 31st order), data storage, and USB connectivity for electrical diagnostics.

Fluke i200S AC Current Clamp delivers accurate non-intrusive AC current measurement from 0.5A to 240A using a BNC voltage output, ideal for multimeters, oscilloscopes, and power quality tools.

AEMC MN255 AC Current Probe: Switch-selectable 20A/200A ranges, 100mV/10mV output, banana plug lead, UL approved for precise low and high current use.

Fluke Wireless General Maintenance System: Fast, safe, and easy electrical panel testing with multi-module AC voltage and current measurements.

Fluke 771 clamp meter: Measure 4–20 mA signals without breaking the loop, 0.2% accuracy, detachable clamp, and dual backlit display for easy troubleshooting.

Weidmuller PRO MAX 480W Power Supply: High-efficiency 24V, 20A power solution for demanding automation. Reliable performance in extreme conditions with long-lasting durability.

Fluke Wireless 4-20 mA DC Clamp Meter: Detachable clamp for safe loop testing, logging up to 65,000 readings, perfect for industrial control systems.

Fluke Networks IntelliTone MT-8203-20 test leads with bed-of-nails clips ensure secure signal tracing and precise wire piercing for Pro 100/200 tools.

Delivers fast point-to-point continuity testing for grounded pathways and long-distance connections with polarity reversal, lead compensation, programmable thresholds, and 300 V CAT IV safety.

INNO Instrument SPA1000 digital power meter with 1 power channel, AC/DC measurement, 100 kHz bandwidth, up to 1000 V and 20 A input, 4-item LED display, and harmonic measurement to the 100th order.