Search results for: 'connections x'

AEMC PowerPad IV 8345 Analyzer: Class A three-phase power quality analyzer with touch LCD, transient capture, energy valuation, and remote control.

AEMC 6529 Digital Megohmmeter Multimeter: Compact, rugged insulation tester with PI/DAR, continuity, voltage & resistance tests—ideal for field use.

AEMC AmpFlex® flexible Rogowski coil sensor, 48" length, measures AC current up to 3000A with 10mV/1mV per amp output for tight spaces.

AEMC SR701 1000A AC Current Probe with 1mA/A output, 52mm jaw, low phase shift, and wide frequency response. Ideal for DMMs, loggers, and power meters.

Introducing the OWON XDM3051W 5 1/2 Digits Bench-Type Digital Multimeter with WiFi: Where Precision Meets Connectivity.

Fluke 902 FC Clamp Meter: Wireless HVAC tool with flame rod µA measurement, 60kΩ resistance range, and Fluke Connect® for safer, remote diagnostics.

AEMC 2135.60 Ground Resistance Tester provides ground resistance, soil resistivity, bond resistance, current, and voltage measurement capabilities with auto-ranging operation up to 99.99 kΩ.

3 5/6 digits 5999 counts 0.5% best accuracy Dual display with analog bargraph Auto/Manual ranging USB data upload Measurement Range DC Voltage (DCV) 600m/6/60/600V ±(0.5%+4d), 1000V ±(1.0%+6d) AC Voltage (ACV) 6/60/600V ±(0.8%+10d), 750V ±(1.0%+10d) DC Current (DCA) 600μ/6000μA ±(1.0%+10d), 60m/600mA ±(1.0%+10d), 6/10A ±(1.2%+10d) AC Current (ACA) 600μ/6000μA ±(1.5%+10d), 60m/600mA ±(1.5%+10d), 6/10A ±(2.0%+15d) Resistance 600Ω ±(0.8%+5d), 6k/60k/600k/6MΩ ±(0.8%+4d), 60MΩ ±(1.2%+10d) Frequency 100/1000Hz ±(0.5%+4d), 10k/100kHz ±(0.5%+4d), 1M/30MHz ±(0.5%+4d) Capacitance 40nF±(5%+30d), 400n/4μ/40μF±(3.5%+8d) 200μF±(5.0%+10d) Temperature -20~400˚C(0~750˚F) ±(1.0%+5d), 400~1000˚C(750~1832˚F) ±(1.5%+15d) Continuity with Buzzer Yes Diode Test Yes Transistor Test Yes Power Source AAA(1.5V)×2pcs (Not included)

Introducing the OWON VDS2064L PC Oscilloscope – Precision, Versatility, and Connectivity for Unmatched Measurements.

Fluke 1555 FC KIT insulation resistance tester delivers digital testing up to 10 kV with IR3000FC wireless connectivity, onboard data storage, and advanced diagnostic measurements for high-voltage electrical assets.

Fluke 287 multimeter: High-accuracy electronics logging with TrendCapture, real-time graphing, and Fluke Connect® compatibility for advanced diagnostics.

Fluke oscilloscope delivers portable, high-performance waveform analysis with isolated inputs, TrendPlot, ScopeRecord, and FFT analysis.

AEMC MiniFlex® 30/300A flexible AC current probe measures up to 300A with high-frequency response, lightweight design, and compatibility with BNC oscilloscopes.

70pcs of 22 AWG solid wires Pre-cut, Pre-stripped and Pre-formed on each end. Variety of colors Completely Reusable 14 lengths x 5pcs each (2, 5, 7, 10, 12, 15, 17, 20, 22, 25, 50, 75, 100 and 125mm)

The Fluke 1587KIT/62MAX+ pairs a 1000 V insulation multimeter with a precision infrared thermometer for comprehensive electrical maintenance and insulation testing. Ideal for diagnosing motor windings, transformers, switchgear, and high-voltage circuits.

AEMC C177A AC Current Probe: 5mA–200A range, 10,000:1 ratio, 6.5ft CA connector lead—designed for CA6116N & CA6117 installation testers.

Megger MIT1025 Insulation Tester: Measure insulation resistance up to 10kV with advanced diagnostics. Fast, reliable, and built for high-performance testing.

Introducing the OWON VDS3104L PC Oscilloscope – Precision, Power, and Connectivity Redefined for Unparalleled Measurements.

Boost energy efficiency with the Fluke 1735 Power Logger! Perfect for three-phase load studies & electrical troubleshooting. Learn more and optimize your systems today! 

The Fluke 376 FC is a high-capacity wireless clamp meter offering True-RMS AC/DC current up to 1000 A, an included iFlex flexible current probe extending range to 2500 A, full voltage capability to 1000 V, and wireless data logging — built for heavy-duty industrial environments.

INNO Instrument SPA6000 is a modular power analyzer with a 12.1-inch touchscreen, support for up to four input modules, 512GB internal storage, and AC/DC power measurement bandwidth from DC to 5MHz.

The AEMC DTR® Model 8511 Digital Transformer Ratiometer provides fast, automatic turns-ratio testing for power, VT/PT, and CT transformers. Features high excitation current, wide ratio range, DataView® software, and a rugged IP53 field design.

Fluke 279FC/IFLEX thermal multimeter combines TRMS measurement with built-in thermal imaging, iFlex current capability, and wireless Fluke Connect reporting.

The AEMC 6555 is a 15kV digital megohmmeter for insulation testing on motors, cables, and electrical apparatus. It supports fixed/variable voltage tests, step and ramp profiles, automatic DAR/PI/DD ratios, on-screen graphs, and USB/DataView reporting with storage for up to 80,000 points.