Search results for: 'tinh dầu quế'

Fluke Networks IntelliTone MT-8203-20 test leads with bed-of-nails clips ensure secure signal tracing and precise wire piercing for Pro 100/200 tools.

The ABB S271-K0.5A Miniature Circuit Breaker is a single-pole, DIN-rail mounted protection device from the System pro M S 270 series. It features a K-curve tripping characteristic with a 0.5 A rated current and 230/400 V AC rated voltage. Designed for cable and appliance protection, it provides thermal and magnetic trip mechanisms with a rated short-circuit breaking capacity of 6 kA in accordance with EN 60 898.

The ABB S271 K1A is a 1-pole miniature circuit breaker from the System pro M S270 series, rated at 1 A with a K tripping characteristic. It provides thermal overload and magnetic short-circuit protection and supports 230/400 V AC operation with a 6 kA breaking capacity.

Eagle Eye GFM-100 battery ground fault monitor with color touchscreen, Ethernet web interface, Modbus TCP/IP, and 4 Form C contacts for real-time monitoring of DC battery systems.

ACV True-RMS Auto Range Pocket Size 3-3/4 digits 3999 counts DCV 400mV, 4/40/400V ±(0.5%+4d), 600V ±(1%+4d) ACV 400mV±(1.5%+6d), 4/40/400V ±(0.8%+6d), 600V ±(1.0%+6d) Resistance 400Ω ±(0.8%+5d) 4k/40k/400k/4MΩ ±(0.8%+4d), 40MΩ ±(1.2%+5d) Frequency 100/1000Hz/10k/100k/1MHz/10MHz ±(0.5%+4d) Capacitance 4nF ±(5%+40d), 40n/400n/4μ/40μ ±(3.5%+8d), 2000μF ±(5%+8d) Duty cycle 0.1~99.9% ±(0.5%+4d) Continuity with beeper 50 ±30Ω Diode test Range: 0 ~ 1.5V Resolution: 1mV Power source 2 x 1.5V AAA battery (Not included)

Fluke 368 FC clamp meter provides 1μA resolution, 60A leakage testing, wireless Fluke Connect logging, and a shielded 40 mm jaw for accurate troubleshooting.

High Voltage Detector: Fast, reliable detection with ABS body, indoor/outdoor use, and quick response time. Ideal for high-voltage testing. Built for safety & durability.

Eagle Eye VGM-Series battery voltage and ground fault monitor with color touchscreen and Ethernet web interface for DC battery systems, delivering clear status monitoring and alarm output control.

comemso Combined Mini-Charger-Tester HW Rev3.4 delivers fast portable CCS and CHAdeMO EVSE checks with touchscreen control, EV simulation, live results, and stored reports.

Compact and lightweight pocket-size device LCD display Non-contact ACV detector LED flashlight Data hold Low battery indication DCV 4200mV/2V/20V/200V±(0.5%+3d) 600V±(0.8%+5d) ACV 2V/20V/200V±(0.8%+3d) 600V±(1.0%+5d) DCA 200μA/2000μA /20mA/200mA±(1.8%+5d) ACA 200μA/2000μA /20mA/200mA±(2.0%+5d) Resistance 200Ω/2kΩ/20kΩ/200kΩ/2MΩ±(1.0%+3d) 20MΩ±(1.2%+15d) Non contact ACV detector Y Diode test Y Continuity with beep Y Certificate RoHS, CE EN61010-1 CATIII 600V Battery 2x1.5V AAA

Fluke T130 voltage and continuity tester delivers reliable AC/DC testing from 6–690V with LCD display and switchable load, helping electricians verify live and dead circuits safely and clearly.

CAT III 1000V Safety rating No contact AC voltage detection from 12 to 1000 VAC No metallic contact Compact size with pocket clip Red LED Voltage level indication Audible alarm if voltage is present Built-in white LED light

AEMC C.A 6116N Installation Tester: Complete compliance testing with continuity, insulation, RCDs, loop, earth, power, harmonics & DataView® software.

Amprobe AMP-310 Clamp Meter: True-RMS HVAC and motor testing with inrush current, temperature, and 3-phase rotation features.

Fluke 27 II delivers rugged industrial multimeter performance with IP67 protection, 3 m drop resistance, and accurate voltage, current, and capacitance testing.

AEMC C.A 6240 digital micro-ohmmeter for precise low-resistance and contact resistance testing. 4-wire Kelvin measurement with selectable test currents up to 10A, 1 µΩ resolution, onboard memory, and DataView® software support.

AEMC C.A 6116N Multi-Function Tester Kit: Verify electrical installations with precision—includes DataView®, clamp, and all-in-one compliance testing.

The Amprobe MO-100 Milliohm Meter offers accurate four-terminal resistance measurement with auto-hold, overvoltage protection, and a portable battery-powered design.

ntroducing the OWON OW18B Smart Digital Multimeter: Your Ultimate Handheld Measurement Companion.

Fluke 771 clamp meter: Measure 4–20 mA signals without breaking the loop, 0.2% accuracy, detachable clamp, and dual backlit display for easy troubleshooting.

The Fluke i1010 is an AC/DC current clamp designed for use with digital multimeters. It measures currents from 1 A up to 1000 A DC and up to 600 A AC using a Hall-effect sensor. The clamp outputs 1 mV per amp for direct reading on compatible meters.

Amprobe 37XR-A digital multimeter delivers True RMS accuracy with component and logic testing, backlit display, and CAT III 600 V safety.

Fluke 369 FC clamp meter offers precise leakage current detection with 1µA resolution, 61 mm jaw size, wireless reporting, and a filter function for noise reduction.