Search results for: 'automa'

The Carlo Gavazzi IA12ALF02POM1 is an M12 flush-mount inductive proximity sensor with a 2 mm rated operating distance. This long-body version features a nickel-plated brass housing, M12 plug connection, PNP normally open output, 10–40 VDC operating voltage, and IP67 environmental protection.

WIKA 13330748 delivers reliable –30 inHg to 160 psi measurement with a 4–20mA output, stainless-steel design, and universal 1/4" NPT connection for industrial systems.

Allen-Bradley 802X-B4 watertight limit switch with top push rod actuator and snap-acting 1NO/1NC contacts. Built for reliable position sensing in harsh industrial control applications.

Banner RWB4 MAXI-BEAM wiring base provides a rugged 4-terminal foundation for mounting MAXI-BEAM sensor heads and power blocks, ensuring easy modular integration.

Panasonic TH2376 is a TH23 series panel-mount hour meter rated for 115 to 120V AC at 60 Hz. It features a reset function and displays elapsed time from 0 to 9999.9 hours in 0.1-hour increments. Designed in DIN 48 size, it includes mounting bracket and decorative nut.

Eaton 10316H10D limit switch delivers reliable push-roller actuation for industrial control systems, featuring NEMA 1 protection and versatile 1NO/1NC contacts.

Honeywell BZ-2RS snap action switch delivers precise SPDT plunger actuation for industrial equipment, offering rugged performance and long operating life.

E.I.L A-11537 delivers reliable 0–150 VAC to 4–20 mA signal conversion for PLC monitoring, providing clean, noise-resistant industrial voltage measurement.

Honeywell LSZ7A1A side rotary limit switch delivers durable HDLS performance with 1NO/1NC contacts for industrial machinery and actuator position sensing.

The Dwyer 1638-2 is a large diaphragm pressure switch designed for low-pressure applications with an operating range of 1 to 3 inches water column (WC). This configuration supports pressure-actuated switching within defined low differential ranges.

The Georg Fischer Signet 3-8510 is an integral-mount paddlewheel flow sensor designed for use in liquid flow measurement applications. This sensor is part of the GF Signet flow measurement platform and is intended for installation within compatible piping systems to generate a flow-proportional signal.

Eagle Eye HGD-SB sensor board for HGD-Series gas detectors. PCB assembly with integrated components for gas detection systems.

The Balluff BFO-48G-DSV-SC-1 is a glass fiber optic cable designed for use with a separate fiber optic base unit. It supports diffuse reflection sensing in side-view configurations and is suited for industrial detection tasks in harsh environments.

Moore Industries IPT2 current-to-pressure transmitter converts a 4-20 mA signal into a proportional 6-30 psig pneumatic output for valves, dampers, and pneumatic actuators in process control systems.

Banner LM3 photoelectric sensor logic module delivers ON-OFF logic with LIGHT/DARK operate selection for MULTI-BEAM 3- and 4-wire sensors.

HYDAC HDA 3405-C-400-130 pressure transmitter with 0 to 400 bar relative pressure range, G 1/4 A process connection, and 4-pole Binder series 714 M18 electrical connection.

Banner Engineering BAT2.53S is a BAT Series glass fiber optic sensor with diffuse sensing mode and a right-angle threaded sensing tip. It features a stainless steel monocoil sheath, brass sensing end, 4 mm core diameter, and 0.914 m fiber length for demanding industrial sensing environments.

The Dwyer AP-7021-153-39 is a diaphragm operated pressure switch with an adjustable 10 to 125 psig range. It uses an SPDT snap acting switch in a general-purpose enclosure and is designed for air, non-corrosive gases, or compatible liquids.

Sick DFS60B-BDPA10000 incremental encoder with 10,000 PPR resolution, 10 mm blind hollow shaft, programmable TTL/HTL output, and radial M23 12-pin male connector for industrial motion control.

The Schaevitz R36AS is an AC operated RVDT (Rotary Variable Differential Transformer) designed for angular position measurement in harsh environments. It features a non-contact electromagnetic design, stainless steel housing, and a Size 15 servo mount configuration. The sensor supports operation from -55°C to +150°C and provides calibrated angular sensing with high reliability and infinite resolution.

The Siemens 771-8STF2 is a Series 771 current-to-pneumatic transducer that converts a 4–20 mA DC input signal to a 3–27 psig pneumatic output. This standard-capacity unit provides 0.16 scfm output and is configured with terminal strip connection and F2 non-incendive hazardous location approval.