Search results for: 'sensor'

The SEKAI RSC-A90 is a ruggedized color camera designed for high-resolution imaging in harsh environments. It features a 1/2" Hyper HAD CCD sensor with 470 TV lines of resolution and selectable NTSC or Y/C output. The camera supports high-speed shutter control up to 1/100,000 second, AGC on/off, and auto white balance, operating from 12 VDC.

Banner SBF1 Multi-Beam high-speed fiber optic scanner block delivers reliable glass fiber photoelectric sensing for small, fast parts in modular Multi-Beam systems.

HYDAC HDA 3405-C-400-130 pressure transmitter with 0 to 400 bar relative pressure range, G 1/4 A process connection, and 4-pole Binder series 714 M18 electrical connection.

Land Instruments 702-778 delivers reliable zero-point calibration for select IR pyrometers, correcting drift and ensuring accurate infrared temperature measurement.

WIKA 13330748 delivers reliable –30 inHg to 160 psi measurement with a 4–20mA output, stainless-steel design, and universal 1/4" NPT connection for industrial systems.

The Dwyer 1638-2 is a large diaphragm pressure switch designed for low-pressure applications with an operating range of 1 to 3 inches water column (WC). This configuration supports pressure-actuated switching within defined low differential ranges.

The Balluff BFO-48G-DSV-SC-1 is a glass fiber optic cable designed for use with a separate fiber optic base unit. It supports diffuse reflection sensing in side-view configurations and is suited for industrial detection tasks in harsh environments.

Valco Melton 765XX125 Valve Module Assembly delivers controlled fluid actuation for industrial adhesive and dispensing systems, supporting precise flow regulation within automated production environments.

The Square D 9007C54A is a heavy-duty industrial limit switch designed for position sensing in automation and machinery applications. It features a rotary actuator with spring return operation, a rugged metal housing, and electrical ratings up to 600 V and 10 A. UL and CSA markings are present on the unit.

Omron Automation Z-15GD55-MRA basic switch delivers compact snap-action control with short spring plunger actuation, attached lead wire, and visible 15A AC rating for automation switching needs.

Allen-Bradley 802X-B4 watertight limit switch with top push rod actuator and snap-acting 1NO/1NC contacts. Built for reliable position sensing in harsh industrial control applications.

The Omron Automation F92A-C-1 is an M18 inductive coupler designed to transmit ON/OFF limit switch signals to compatible inductive proximity sensors without direct electrical contact. Using magnetic coupling between coils, it enables signal transmission across a 5 mm distance. The unit operates without a power supply and is prewired with a 2 m cable. Rated IEC IP67, it supports operation in environments exposed to oil and dust within specified temperature and humidity limits.

The Siemens 771-8STF2 is a Series 771 current-to-pneumatic transducer that converts a 4–20 mA DC input signal to a 3–27 psig pneumatic output. This standard-capacity unit provides 0.16 scfm output and is configured with terminal strip connection and F2 non-incendive hazardous location approval.

The Dwyer AP-7021-153-39 is a diaphragm operated pressure switch with an adjustable 10 to 125 psig range. It uses an SPDT snap acting switch in a general-purpose enclosure and is designed for air, non-corrosive gases, or compatible liquids.

Sick DFS60B-BDPA10000 incremental encoder with 10,000 PPR resolution, 10 mm blind hollow shaft, programmable TTL/HTL output, and radial M23 12-pin male connector for industrial motion control.

Panasonic TH2376 is a TH23 series panel-mount hour meter rated for 115 to 120V AC at 60 Hz. It features a reset function and displays elapsed time from 0 to 9999.9 hours in 0.1-hour increments. Designed in DIN 48 size, it includes mounting bracket and decorative nut.

Honeywell BZ-2RS snap action switch delivers precise SPDT plunger actuation for industrial equipment, offering rugged performance and long operating life.

The WAGO 750-554 delivers precise 4–20 mA analog output for the WAGO 750 Series, providing isolated 12-bit current signals for industrial automation and control.

Shindengen F020158R.0831 rotary solenoid delivers precise DC-driven motion for industrial and automation systems, ideal for assemblies like the M100AIE/U/H.

Johnson Controls FTG18A 600R Pressure Switch: Reliable remote probe for precise airflow and pressure control. Ideal for HVAC systems with durable, long-lasting performance.

Siemens 771-16STF2 current-to-pneumatic transducer converts a 4–20 mA DC input to a 3–15 psig pneumatic output. Standard output capacity (0.16 scfm), terminal strip wiring, 20 psig supply, and FM-approved F2 non-incendive classification.