Search results for: 'diy뜻'

Eaton 10316H10D limit switch delivers reliable push-roller actuation for industrial control systems, featuring NEMA 1 protection and versatile 1NO/1NC contacts.

Siemens 771-16STF2 current-to-pneumatic transducer converts a 4–20 mA DC input to a 3–15 psig pneumatic output. Standard output capacity (0.16 scfm), terminal strip wiring, 20 psig supply, and FM-approved F2 non-incendive classification.

HYDAC HDA 3405-C-400-130 pressure transmitter with 0 to 400 bar relative pressure range, G 1/4 A process connection, and 4-pole Binder series 714 M18 electrical connection.

Panasonic TH2376 is a TH23 series panel-mount hour meter rated for 115 to 120V AC at 60 Hz. It features a reset function and displays elapsed time from 0 to 9999.9 hours in 0.1-hour increments. Designed in DIN 48 size, it includes mounting bracket and decorative nut.

Moore Industries IPT2 current-to-pressure transmitter converts a 4-20 mA signal into a proportional 6-30 psig pneumatic output for valves, dampers, and pneumatic actuators in process control systems.

FTS Technologies CB-004 delivers reliable zirconia oxygen sensing for industrial high-temperature applications, compatible w/ OXY-LC systems for continuous O₂ monitoring.

WIKA 13330748 delivers reliable –30 inHg to 160 psi measurement with a 4–20mA output, stainless-steel design, and universal 1/4" NPT connection for industrial systems.

The Omron Automation F92A-C-1 is an M18 inductive coupler designed to transmit ON/OFF limit switch signals to compatible inductive proximity sensors without direct electrical contact. Using magnetic coupling between coils, it enables signal transmission across a 5 mm distance. The unit operates without a power supply and is prewired with a 2 m cable. Rated IEC IP67, it supports operation in environments exposed to oil and dust within specified temperature and humidity limits.

The SEKAI RSC-A90 is a ruggedized color camera designed for high-resolution imaging in harsh environments. It features a 1/2" Hyper HAD CCD sensor with 470 TV lines of resolution and selectable NTSC or Y/C output. The camera supports high-speed shutter control up to 1/100,000 second, AGC on/off, and auto white balance, operating from 12 VDC.

Carlo Gavazzi CA18CLN12NA capacitive proximity sensor delivers adjustable 3–12 mm detection with 10–40 VDC operation, supporting reliable material detection across industrial automation and level sensing applications.

Land Instruments 702-778 delivers reliable zero-point calibration for select IR pyrometers, correcting drift and ensuring accurate infrared temperature measurement.

E.I.L A-11537 delivers reliable 0–150 VAC to 4–20 mA signal conversion for PLC monitoring, providing clean, noise-resistant industrial voltage measurement.

The Dwyer AP-7021-153-39 is a diaphragm operated pressure switch with an adjustable 10 to 125 psig range. It uses an SPDT snap acting switch in a general-purpose enclosure and is designed for air, non-corrosive gases, or compatible liquids.

The Schaevitz R36AS is an AC operated RVDT (Rotary Variable Differential Transformer) designed for angular position measurement in harsh environments. It features a non-contact electromagnetic design, stainless steel housing, and a Size 15 servo mount configuration. The sensor supports operation from -55°C to +150°C and provides calibrated angular sensing with high reliability and infinite resolution.

Honeywell 923AA2W-A7T delivers reliable inductive metal detection with a shielded short-barrel design, wide AC/DC voltage, and durable performance for harsh environments.

The Dwyer 1638-2 is a large diaphragm pressure switch designed for low-pressure applications with an operating range of 1 to 3 inches water column (WC). This configuration supports pressure-actuated switching within defined low differential ranges.

Sick DFS60B-BDPA10000 incremental encoder with 10,000 PPR resolution, 10 mm blind hollow shaft, programmable TTL/HTL output, and radial M23 12-pin male connector for industrial motion control.

Telemecanique XVA-L3 green module delivers reliable 360° machine status indication for Harmony XVA towers, supporting 240V BA15d lamps for clear industrial signaling.

E.I.L A-11536 delivers reliable 0–500 µA to 4–20 mA signal conversion for PLC/DCS systems, offering stable sensor integration and noise-resistant panel-mount operation.

Honeywell 923AA4W-A7T-L proximity sensor offers durable, explosion-proof metal detection with an M18 stainless housing and IP67 sealing for harsh industrial environments.