Search results for: 'connects'

AEMC 2136.77 Replacement Lead Set provides 15 ft test leads designed for use with AEMC DTR Models 8500 and 8510. Supplied as a set of two leads and intended as a replacement for Cat #2118.48.

GAI-Tronics 411A speaker mounting bracket assembly for wall mounting and positioning compatible speaker hardware, with bracket, adapter, conduit pipe, elbow, and gasket.

Fluke 80PK-22 immersion temperature probe delivers reliable Type-K measurements for liquids and gels. Designed for wide temperature ranges and fast response when used with compatible thermocouple instruments.

Fluke TL80A test lead set delivers flexible silicone leads, fine electronic probes, and banana plug compatibility for accurate low-energy electronic measurements with Fluke and compatible multimeters.

AEMC 2129.89 Kelvin Lead Set provides 20 ft color-coded Kelvin connections with 3 in C-clamps for low-resistance testing applications using compatible AEMC 6290 and 6292 micro-ohmmeters.

The AEMC 2129.87 Kelvin Lead Set provides 50 ft color-coded Kelvin connections with 3 in C-clamps for low-resistance measurement applications using compatible AEMC 6290 and 6292 micro-ohmmeters.

Bently Nevada 330102-00-40-10-02-00 proximity probe cable assembly for 3300 XL 8 mm monitoring setups, built for proximity measurement connection in machinery monitoring systems.

Pomona 5250 8-Pin SOIC test clip delivers hands-free, noise-free in-circuit testing of SOIC and SOJ chips. Gold-plated contacts ensure reliable connections on live boards.

Fluke 80PK-1 Type K beaded thermocouple probe delivers fast-response air and surface temperature measurement using a miniature connector. Designed for general-purpose diagnostics with compatible Type K instruments.

INNO Instrument PAL-1003 external sensor connection cable with BNC connector for connecting external CT or VT sensors to compatible INNO Instrument SPA series power analyzers.

The Inno Instrument HDMI to USB Cable is a communication interface designed for Inno Instrument VIEW series fusion splicers, including VIEW 3, VIEW 5, VIEW 7, and VIEW 12R models. It connects the splicer’s Micro HDMI port to a standard USB Type-A port on a computer for data transfer, software updates, and graphical interface mirroring.

The INNO Instrument DIN-18 is a DC power cable designed to connect compatible INNO TS-Pro or TS-Plus thermal strippers to the power output port of supported INNO View series fusion splicers. It enables field operation by allowing the thermal stripper to draw power directly from the splicer’s internal battery.

Fluke TI-CAR CHARGER car charger allows convenient 12 V DC charging of compatible Fluke thermal imagers directly from a vehicle power outlet.

Wöhler 5529 Perlon Threaded Brush Kit brings four M10 brush sizes—8", 10", 12", and 14"—into one flexible cleaning set for matching different flue, chimney, and ventilation line diameters with fast, practical setup.

Kaye X2025 Sensor Input Module for Validator 2000 delivers 12-channel sensor connectivity for validation workflows, supporting thermocouple, voltage, and current inputs with onboard calibration memory and reference RTD accuracy support.

The INNO Instrument ACC-25-B AC Power Cable is a standard AC input cord designed to connect compatible INNO Instrument AC adapter blocks to a wall outlet. Featuring a 2-pin wall plug and C7 “Figure-8” connector, it supports 100–240V AC operation when used with approved adapters such as the JS-1618 and JS-180300 for View and M series fusion splicers.

AEMC E94 AC/DC Current Probe: Compact, Hall-effect design with 100A range, zero DC reset, and auto recognition for PowerPad 8345 & PEL loggers.

Digi-Pas DWL5000XY PC Sync PRO Software brings remote tilt monitoring, 2D leveling, alignment, vibration measurement, and data logging together in one fast, plug-and-play workflow for compatible Digi-Pas systems.

Digi-Pas DWL3000XY PC Sync PRO software delivers real-time dual-axis leveling, angle, alignment, and vibration data logging on Windows PCs through USB or Bluetooth connectivity for faster measurement capture and analysis.

AEMC 2137.90 Power To Phase Adapter supplies PEL power and energy loggers from the phase power under test for extended 50/60 Hz monitoring on 600 V CAT III installations.

AEMC AmpFlex Rogowski coil sensor with 24" flexible loop. Measures 300A and 3000A AC with dual 10mV/A and 1mV/A outputs. Ideal for tight spaces and irregular conductor shapes.

Rohde & Schwarz FSH-Z1 true RMS terminating RF power sensor for 10 MHz–8 GHz measurements, providing accurate average power analysis and direct compatibility with FSH series handheld spectrum analyzers.

AEMC 2135.76 BNC 50 ft (15 m) Extension Lead expands connection reach for Model 6474 and other compatible BNC-connected electrical testing equipment in field and industrial measurement environments.

AEMC 2118.73 Kelvin Probes provide low-resistance measurement connections for compatible micro-ohmmeters. Featuring 10 ft leads, spring-loaded probes, 4 mm banana plug termination, and a set of five fork terminals for versatile connection methods.

AEMC 2135.86 BNC 150 ft M/F Extension Lead provides extended BNC connectivity for compatible electrical testing and measurement equipment requiring male-to-female BNC cable extension capability.