Search results for: 'control for'

Eagle Eye IBEX-Extended Arm Rod Set is a 30 in. LED-lit test lead extender designed for use with IBEX-Series testers to reach battery terminals in difficult locations.

The Fluke AC285 SureGrip™ Alligator Clips include one red and one black large alligator clip with nickel-plated steel jaws. Designed with rubber overmolded SureGrip surfaces, they provide a stable, comfortable grip for electrical testing. Rated CAT IV 600 V, CAT III 1000 V, 10 A.

The Fluke TP88 Rigid Back Probe Pin Set includes two fine-tip, rigid back probe pins designed for use with 2 mm test probes. The red and black insulated pins slide onto compatible probes and allow access between weather pack seals and wires. Tested to 60 V DC.

Fluke Networks FI1000-MPO-UTIP probe tip enables precise MPO/MTP UPC fiber inspection on FI-1000 probes, ideal for patch cord and bulkhead connector analysis.

Fluke 80PK-3A Type K probe measures flat or curved surface temperatures up to 260°C, ideal for rollers and plates when used with compatible Fluke adapters.

Fluke Networks FI1000-MPOAPC-UTIP probe tip with translator knob for FI-1000 video probe, ideal for inspecting MPO/MTP APC connectors on patch cords and bulkheads.

Fluke TL220 test lead set offers secure SureGrip handling, interchangeable components, and durable silicone leads for reliable electrical applications.

Pomona 2305 low thermal EMF spade lug set minimizes thermoelectric effects with gold-plated tellurium copper for precise low-voltage measurements.

The Fluke TL75 Hard Point Test Lead Set combines test lead and probe into a single unit for general-purpose electrical measurements. This set includes one red and one black PVC-insulated lead, each 48 inches long, with right-angle shrouded banana plugs and removable protective caps.

The Pomona 6235 is an SMD microtip test probe set designed for probing surface-mount device contacts. It includes one red and one black 48-inch lead with curved, flexible stainless-steel needle tips to aid access to hard-to-reach areas while reducing risk of damage.

Pomona 4555-2 is a Do-It-Yourself Minigrabber test clip designed for hands-free electrical testing. Accepts wire up to 0.144 in diameter and 0.025 in square pins. Rated to 5 A and 300 Vrms for hands-free use. Supplied as a package of ten red test clips.

The Littelfuse L70S040 is a 40 A, 700 V high-speed semiconductor fuse designed for current-limiting protection of sensitive power electronics. It features a round melamine body with silver-plated copper terminals and is rated for both AC and DC systems.

Pomona Model 4555-0 is a do-it-yourself minigrabber test clip designed for hands-free electrical testing. It accepts wire diameters up to 0.144 in and uses a gold-plated beryllium copper contact with stainless steel spring. Supplied as a 10-piece black set.

Fluke TP38 probes offer slim insulated tips for safe access to tight terminals, featuring hardened stainless steel tips and CAT IV 600V safety rating.

AEMC 2118.85 25A Kelvin Probes deliver spring-loaded pistol-grip contact for 4-wire low-resistance measurements with compatible micro-ohmmeters.

The Fluke TL222 SureGrip test lead set includes red and black silicone-insulated leads with right angle connectors on both ends. Designed for digital multimeters, these leads feature safety-shrouded banana plugs, reinforced strain relief, and a 1.5 meter cable rated for CAT IV 600 V and CAT III 1000 V applications.

Gould Shawmut A70P100-4 semiconductor fuse delivers 100A protection with 700VAC and 650VDC ratings, designed for high-speed circuit protection in power electronics and semiconductor applications.

Fluke TL82 adapter set provides secure pin and socket connections for automotive testing, supporting voltage, frequency, duty cycle, and resistance checks.

Fluke 80PK-25 SureGrip Probe: Type K thermocouple for accurate liquid, gel, and food temperature readings from -40°C to 350°C (-40°F to 662°F).

Fluke TL238 test lead kit enhances safety in high-energy environments with insulated probes, extenders, and silicone leads for secure multimeter connections.

Fluke 190-204-III is a 4-channel portable ScopeMeter oscilloscope with 200 MHz bandwidth, isolated inputs, WiFi and USB connectivity, built for high-voltage industrial signal troubleshooting.

The Fluke CV301 is a 3 in (75 mm) ClirVu® infrared inspection window with a security key door latch. Designed for permanent installation on electrical enclosures, it enables infrared inspections without opening panel doors while maintaining enclosure ratings and safety compliance.

AEMC MiniFlex® 30/300A flexible AC current probe measures up to 300A with high-frequency response, lightweight design, and compatibility with BNC oscilloscopes.

AEMC 2118.84 Spring-Loaded Kelvin Probe Set delivers accurate low-resistance measurements using 4-wire Kelvin methodology. Featuring pistol-grip probes, 25A current rating, and 10.33 ft leads for use with compatible micro-ohmmeters.