Search results for: 'maximum'

The Dwyer AP-7021-153-39 is a diaphragm operated pressure switch with an adjustable 10 to 125 psig range. It uses an SPDT snap acting switch in a general-purpose enclosure and is designed for air, non-corrosive gases, or compatible liquids.

The TCI AS-B875-002 KLC25BE dv/dT Guard Output Filter is designed to protect AC motors driven by PWM variable frequency drives. Rated for 25 A, 3-phase, 480 V systems, it limits voltage spikes and dV/dt effects that can damage motor insulation and cabling.

The Honeywell 621-9939 Serial Link Module is a communication interface for Honeywell Series 9000 and IPC 620 control systems. It manages serial I/O data exchange between the main processor and distributed serial devices using dual asynchronous channels and RS485 connectivity.

Phoenix Contact RAD-IN-8D is an 8-channel digital input extension module for the Radioline system. It accepts 5–30 V AC/DC signals, mounts on a 35 mm DIN rail, and connects via a bus foot connector for modular industrial automation signal acquisition.

Fluke 717 15G Pressure Calibrator delivers precise -12 to 15 psi measurements with 0.05% accuracy, mA measurement, and compact field-ready design.

Allen-Bradley 1772-SD2 remote I/O scanner enables PLC-2 processors to communicate with remote I/O racks, supporting up to 1792 I/O points with serial twinaxial connectivity and LED status indicators.

Allen-Bradley 1334-MOD-W3 run/fault contact mod kit adds isolated relay outputs for remote drive status monitoring on Bulletin 1334 and 1335 AC drives, supporting external control and annunciation systems.

Fluke 368 FC clamp meter provides 1μA resolution, 60A leakage testing, wireless Fluke Connect logging, and a shielded 40 mm jaw for accurate troubleshooting.

Fluke FLK-3000FC IND system offers wireless multimeter testing with current and voltage modules, remote monitoring, logging, and Fluke Connect integration.

Allen-Bradley 1492-FB3J60-L fuse holder provides secure Class J fuse mounting for control applications, supporting reliable protection in industrial systems.

Adam Equipment AE 403 Indicator: Rugged, stainless steel design with backlit display and overload tracking. Perfect for industrial use with high-visibility readouts.

FTTH Innovations FIG air blown microfibre installation tool with electronic push force control and cruise control mode for controlled fibre installation in microduct at speeds up to 100 m/min.

Hilti PS 300 Ferroscan Concrete Scanner Kit helps locate rebar, measure cover, estimate bar diameter, and refine scan analysis with PSA 200 Monitor Tablet, PROFIS Detection, and Expert Mode control.

Olympus OmniScan X3 PA1664PR 16:64 phased array flaw detector with WiFi 5 adapter, IP65-rated enclosure, TFM-capable PAUT performance, and onboard scan plan tools for efficient weld and corrosion inspections.

Rugged, battery-powered Kaelus iPA-1900A PIM analyzer delivers precise passive intermodulation testing for wireless professionals. Portable, dual-band design with remote capabilities for efficient RF system diagnostics.

Allen-Bradley 100-C12ZA10 3-pole contactor brings IEC motor-control switching with a 220V DC coil, 1 NO auxiliary contact, and marked AC load ratings.

Entrelec Schiele Systron PS 2.423.418.00 24V/1A DIN rail power supply delivers 24V DC at 1A from a wide 90-260V AC input for compact control-panel and automation power conversion.

Omron CJ1W-PD025 PLC power supply unit brings 24 VDC input power to CJ-series control racks with 5.0 A at 5 VDC, 0.8 A at 24 VDC, and 25 W capacity for modular automation systems.

SOR 101RN-KK45-M4-C1A differential pressure switch with 10-75 PSID adjustable range, RN weathertight aluminum housing, KK DPDT switching element, M4 diaphragm and O-ring system, and C1A 1/4 in NPT(F) pressure port.

Sick DFS60B-BDPA10000 incremental encoder with 10,000 PPR resolution, 10 mm blind hollow shaft, programmable TTL/HTL output, and radial M23 12-pin male connector for industrial motion control.

Siemens 3RT2035-3AK60 SIRIUS power contactor rated 41 A (AC-3) at 400 V with 18.5 kW operating power. Three-pole design with integrated 1 NO + 1 NC auxiliary contacts and 110 V AC (50 Hz) / 120 V AC (60 Hz) control coil. Size S2 frame with screw-type main terminals and spring-loaded auxiliary/control terminals.

Panasonic TH2376 is a TH23 series panel-mount hour meter rated for 115 to 120V AC at 60 Hz. It features a reset function and displays elapsed time from 0 to 9999.9 hours in 0.1-hour increments. Designed in DIN 48 size, it includes mounting bracket and decorative nut.

The GE Fanuc IC660BBR101 is a Genius I/O relay output block providing 16 normally open relay outputs. Designed for distributed control systems, it supports 115/230 VAC block power, individual output status LEDs, and compatibility with a wide range of low-power AC and DC control devices.