Search results for: 'systemd'

Phoenix Contact QUINT-DIODE/12-24DC/2X20/1X40 is a DIN-rail mounted redundancy diode module for 12–24 V DC systems. It decouples parallel power supplies to increase system availability, supporting 2×20 A redundancy or 1×40 A increasing power operation.

Allen-Bradley 50388 Driver PCB Board provides signal conditioning and drive interface control for compatible Allen-Bradley automation systems, supporting reliable communication between logic modules and field devices.

Allen-Bradley 1336-CONV-SP4A converter power module designed for 1336 series adjustable frequency AC drives. Supports three-phase motor control applications within compatible 1336 drive platforms.

Eagle Eye LB-480-100-CCD delivers 480V, 100A constant-current DC load testing with auto-sensing voltage, adjustable discharge current, internal data saving, 5" LCD control, and data management software.

Fluke 190-202-III-S portable ScopeMeter delivers 200 MHz bandwidth, 2 channels, 2.5 GS/s sampling, and FlukeView software for advanced industrial diagnostics.

Eaton 9575H3A000 relay offers reliable DPDT switching for industrial control systems, featuring a 110/120V coil and heavy-duty performance for diverse AC/DC loads.

Arrow Pneumatics EK38 is a 40 micron sintered bronze particulate filter element kit for compatible MidFlow Arrow particulate filters, providing depth filtration and recleanable construction.

Westinghouse Emerson 5X00070G34 is an Ovation analog input module. The front label identifies analog input ranges of ±20 mV, ±50 mV, and ±100 mV. Module only.

Fluke 3PHVL-17XX-5M is a 3-phase + neutral voltage test lead cable assembly designed for structured multi-phase measurements, delivering organized lead management and reliable electrical connectivity over a 5 m length.

The Mitsubishi A1SG60 is a blank slot cover dummy module for MELSEC-A series PLC base units. It fills unused slots to protect internal components, reduce exposure to dust or foreign objects, and help maintain system stability when vacant slots are present.

Fisher XLT30-B acoustic leak detector with Multi-Sensor provides precise water leak detection using adjustable filters, notch rejection, and high-sensitivity microphones for concrete, asphalt, and turf surfaces.

The LEMO FGL.5K.314.CYMC20 is a 5K-Series circular push-pull connector with 14 low-voltage crimp contacts and IP68 environmental sealing. Designed for harsh environments, it supports up to 18 A per contact, reverse-gender configuration, and secure push-pull locking.

Phoenix Contact RAD-IN-8D is an 8-channel digital input extension module for the Radioline system. It accepts 5–30 V AC/DC signals, mounts on a 35 mm DIN rail, and connects via a bus foot connector for modular industrial automation signal acquisition.

Fluke SOL-DMM87V-KIT combines a high-efficiency PV I-V curve tracer with an 87V multimeter and 393 FC clamp meter for solar diagnostics.

The Wöhler VIS 700 HD (7459) is a dedicated chimney inspection camera with a Ø 1.5″ motorized pan-and-tilt HD camera head, self-leveling, and autofocus. Designed for professional chimney and flue inspections with crystal-clear HD imaging.

Bussmann BPM275UL is a plug-in DIN rail surge protection module for 275 V systems, delivering 40 kA maximum surge current, 20 kA nominal discharge current, and local status indication for panel protection applications.

Allen-Bradley 1769-OW8I Compact I/O relay output module with eight individually isolated AC/DC outputs for CompactLogix and MicroLogix 1500 systems, supporting mixed-voltage industrial load control.

Allen-Bradley 1336-R2-SP2A precharge resistor kit for 1336 series drives, providing safe inrush current control and reliable compatibility across multiple drive families.

AEMC 607 True-RMS Power Clamp-On Meter: Measures AC/DC volts, amps, power, harmonics & InRush with Bluetooth logging and CAT IV safety.

The Sauermann Si-RD3 refrigerant leak detector uncovers leads of most common refrigerant gases to a high degree of sensitivity, including all HCFC and HFC refrigerants, R1234yf, R1234ze, R290, R600a, and 5% hydrogen-95% nitrogen mixtures (Nidron 5 and Trace-A-Gas).

SOR 101RN-KK45-M4-C1A differential pressure switch with 10-75 PSID adjustable range, RN weathertight aluminum housing, KK DPDT switching element, M4 diaphragm and O-ring system, and C1A 1/4 in NPT(F) pressure port.

The ABB S271-K0.5A Miniature Circuit Breaker is a single-pole, DIN-rail mounted protection device from the System pro M S 270 series. It features a K-curve tripping characteristic with a 0.5 A rated current and 230/400 V AC rated voltage. Designed for cable and appliance protection, it provides thermal and magnetic trip mechanisms with a rated short-circuit breaking capacity of 6 kA in accordance with EN 60 898.

EM Integrated ASTAQ385MR0553002K000 plug delivers reliable 26-pin signal connectivity with lamella clamping, Series 627 compatibility, and included female contacts.

Eaton FA20 auxiliary contact block adds 2NO contacts to XTMCX contactors and XTRM relays, offering reliable control signaling and easy front-mount installation.

Sauermann P/N 27529 Low SO2 Sensor 230 is a Low SO2 Sensor (0-100ppm) with board for Si-CA 230 Upgrade