Search results for: 'openzl'

Eaton DILM12-10 XTCE012B10A XT IEC contactor provides 12A three-pole full-voltage non-reversing control with 110–120 Vac coil, 1 NO contact configuration, and screw terminals.

KATKO KU 380N load break switch delivers 3-pole isolation and switching up to 80A at 690V AC-22, supporting reliable control and disconnection of electrical loads in industrial power systems.

GAI-Tronics 7335-001 is a 5 party line weatherproof non-metallic enclosure built for analog Page/Party intercom systems, combining NEMA 4X outdoor protection, 120 VAC input, and reinforced polyester fiberglass construction for demanding installations.

Sick DFS60B-BDPA10000 incremental encoder with 10,000 PPR resolution, 10 mm blind hollow shaft, programmable TTL/HTL output, and radial M23 12-pin male connector for industrial motion control.

The Siemens 771-8STF2 is a Series 771 current-to-pneumatic transducer that converts a 4–20 mA DC input signal to a 3–27 psig pneumatic output. This standard-capacity unit provides 0.16 scfm output and is configured with terminal strip connection and F2 non-incendive hazardous location approval.

The ABB S271 K1A is a 1-pole miniature circuit breaker from the System pro M S270 series, rated at 1 A with a K tripping characteristic. It provides thermal overload and magnetic short-circuit protection and supports 230/400 V AC operation with a 6 kA breaking capacity.

The Allen-Bradley 1769-IQ16 is a Compact I/O 16-point, 24V DC digital input module for CompactLogix and MicroLogix 1500 systems. It supports sinking and sourcing inputs, provides LED status indication per point, and installs via DIN rail or panel mount.

The Honeywell 621-9939 Serial Link Module is a communication interface for Honeywell Series 9000 and IPC 620 control systems. It manages serial I/O data exchange between the main processor and distributed serial devices using dual asynchronous channels and RS485 connectivity.

Allen-Bradley 1334-50907 Line/Converter Power Module for Bulletin 1334 AC drives. Internal power board supporting sine-weighted PWM motor control in 5–10 HP variable frequency drive systems.

Allen-Bradley 1771-ID isolated AC/DC input module for PLC-5 systems, providing six individually isolated 120V inputs for reliable signal detection from switches and discrete field devices.

Allen-Bradley 193-EPD is an E1 Plus separate mounting adapter that enables DIN rail or panel installation of compatible electronic overload relays, improving control panel layout flexibility and thermal performance.

Allen-Bradley 193-EPM1 is an E1 Plus overload relay adapter that enables DIN rail or panel mounting of Bulletin 193-EA and 193-ES electronic overload relays for flexible control panel layouts.

Allen-Bradley 193-EPM2 is a DIN rail and panel mount adapter that enables remote mounting of compatible Bulletin 193-E solid-state overload relays, improving layout flexibility in industrial motor control panels.

Allen-Bradley 700-HA33Z24-3 is a 24V DC general-purpose ice cube relay with 3PDT contacts, push-to-test and manual override, designed for dependable industrial control and panel automation.

Allen-Bradley 1336-SCR-SP3A Input SCR Power Module for 1336 Adjustable Drives. Designed for 460V AC line-side rectification in Frame D drives supporting 60–100 HP systems.

Allen-Bradley 1492-IFM20F-2 interface module delivers 20-point feed-through wiring for PLC I/O systems, supporting up to 264V AC/DC with DIN rail mounting for organized control panels.

Allen-Bradley 1771-RTP1 remote termination panel for PLC-5 systems simplifies analog field wiring, supports 1771-N modules, and enables cold-junction compensation for precise thermocouple measurements.

Metso Automation IOP332 digital input module for Valmet control systems, designed to monitor 120V AC/DC binary field signals from industrial devices with reliable I/O processing and diagnostics.

Allen-Bradley 100-C12D10 contactor with 193-EA1DB E1 Plus overload relay provides IEC motor switching with electronic overload and phase-loss protection for reliable industrial motor control.

The Fluke Networks DSX2-CFP-Q-ADD-R add-on kit includes dual DSX-5000 copper certification modules, quad OLTS fiber modules, and a Versiv 2 remote. It expands your Versiv certification system to handle both high-performance copper (Cat 6A/Class EA) and fiber loss/length testing in one streamlined workflow—ideal for full-scope network certification.

Bussmann LKS-30 fuse link delivers reliable 30A time-delay protection for RES Class H systems, offering renewable 600V performance for industrial applications.

Fluke CV200 IR Window: Safe, quick 2-inch thermal inspection access with AutoGround, IP67 protection, and durable ClirVu optic coating.

AmRad RA200044-505 capacitor delivers reliable 5.0 MFD motor performance for HVAC and compressors; legacy model replaced by USA2029 for long-term durability.

Land Instruments 702-777 enhances IR pyrometer accuracy with stable optical chopping for noise-reduced measurements, ideal for demanding industrial environments.