Search results for: 'intox.tu intoxtu index to'

AEMC 6529 Digital Megohmmeter Multimeter: Compact, rugged insulation tester with PI/DAR, continuity, voltage & resistance tests—ideal for field use.

INNO Instrument SCTX200 pass-through current sensor with 0-200A DC range, 200A peak AC range, DB9 interface, ±12V to ±15V supply, and 28 mm aperture.

The compact Sauermann Si-HH3 thermo-hygrometer effortlessly gauges both relative humidity and temperature and fits in the palm of your hand.

INNO Instrument SCTX600 current sensor for 0 to 600A DC and 600Apeak AC measurement, with Ø30.9 mm aperture, DB9 connector, and ±15V to ±24V supply requirement.

Fluke 1555 FC insulation tester delivers up to 10 kV testing with Fluke Connect remote operation, PI/DAR calculations, and CAT IV safety ratings.

Fluke FVF-BASIC software enables meter-to-PC data transfer and quick table or graph reports from supported Fluke instruments.

The INNO Instrument CH-01 Universal Fiber Holder is a cleaver accessory designed to secure multiple fiber cable types during the cleaving process. It supports 250µm and 900µm fiber, flat or drop cable enabling technicians to work across common installation formats without changing holders. Compatible with select INNO high-precision cleavers.

Olympus HI-6780 dual-element ultrasonic immersion transducer for reliable NDT flaw detection, compatible with pitch-catch systems and 1 MHz immersion testing.

AEMC 6505 Megohmmeter: Portable insulation tester with digital and analog bargraph, auto DAR/PI, backlight, and 500V to 5000V test voltages.

AEMC 2118.78 Kelvin probes bring crisp 10A low-resistance test contact with spring-loaded rotating tips, 4-wire measurement support, and 20 ft leads.

Fluke 1507 insulation tester delivers advanced megohm measurements, multiple test voltages, PI/DAR calculations, and safety features for industrial electricians.

Radiodetection RD1000 portable ground penetrating radar system with RD1000+ display for real-time subsurface imaging, utility mapping, and locating metallic and non-metallic infrastructure with on-screen depth estimation and snapshot recording.

The INNO Instrument SC-SM-UPC-30S is a 10-pack of SC single-mode UPC splice-on connectors designed for 3.0mm jacketed fiber. Using fusion splice termination, these short boot SOC connectors provide stable optical performance without field polishing or index-matching gels.

AEMC 5060 Digital Analog Megohmmeter — A 5000V Insulation Tester with USB, DataView® Software, and Advanced Insulation Diagnostics.

INNO Instrument SCTH60 current sensor with 0–60A DC range, 60Apeak AC range, 28 mm aperture, DB9 connector, and DC to 800 kHz bandwidth for precision current measurement.

Elevate your fiber testing capabilities with the **Viavi E136FB-VFL-AFL SmartOTDR**. This compact, handheld tester supports tri-wavelength analysis at 1310nm, 1550nm, and filtered 1650nm, making it an essential tool for field technicians. Equipped with a Visual Fault Locator (VFL) and APC connector, this device ensures quick identification of faults and secure connections, streamlining FTTH and FTTx network diagnostics. Lightweight and user-friendly, it delivers accurate results with automated analysis. Perfect for telecommunications and data center applications, the Viavi E136FB is your go-to solution for efficient fiber optic testing.

INNO Instrument SCTX60 current sensor with 0-60A DC range, 60Apeak AC range, DB9 connection, 28 mm aperture, and DC-800 kHz measuring bandwidth for precision current measurement applications.

INNO Instrument SCTX1000 is a 1000A AC/DC pass-through current sensor with 30.9 mm aperture, DB9 connection, DC to 300 kHz bandwidth, and ±15V to ±24V supply requirement.

INNO Instrument SCTH200 pass-through current sensor with 0–200A DC range, 200A peak AC, DC to 500kHz bandwidth, DB9 connector, and Φ28mm aperture.

Megger MIT525 insulation resistance tester applying DC test voltages to 5 kV for evaluation of electrical insulation in cables, motors, transformers, and switchgear. Supports IR, timed IR, DAR, PI, dielectric discharge, stepped voltage, and ramp tests with onboard memory and USB data transfer.

AEMC 5050 Digital/Analog Megohmmeter with 5000V insulation testing, auto DAR, PI, DD, backlight, alarm, timer, rechargeable battery, and AC power.

The INNO Instrument LBT-52 is an 11.1V, 5200mAh (57.72Wh) rechargeable lithium-ion battery pack designed for INNO fusion splicers. It features an integrated LED battery level indicator for real-time capacity monitoring and supports approximately 3-hour charging.