Search results for: 'limits dual'

The Fluke 700PTP-1 is a pneumatic test and vacuum pump designed to generate pressure up to 600 psi (40 bar) and vacuum down to -13 psi (-0.9 bar). It features adjustable stroke control, a vernier for fine pressure adjustment, and dual 1/4 in NPT female ports for simultaneous connection to a reference gauge and device under test.

Allen-Bradley 1489-M1C250 is a 25A UL489-listed 1-pole DIN-rail circuit breaker with C-curve thermal-magnetic protection, designed for reliable branch circuit protection in industrial control panels.

The Fluke 1630-2 FC is a high-performance ground-loop/leakage clamp meter that enables non-intrusive testing of bonded grounding systems — no auxiliary stakes needed — with wireless logging and rugged construction for industrial use.

The Phoenix Contact PSR-SCF-24UC/URM/2x21 is a safety coupling relay designed for safe switch-off applications in industrial control systems. It features two force-guided changeover contacts, 24 V AC/DC supply voltage, and supports safety category 1, PL c, and SIL 1 applications.

Allen-Bradley 1492-CB2 H 200 is a 2-pole DIN-rail supplementary circuit breaker designed for industrial control panels, providing reliable thermal-magnetic overcurrent protection with an H-curve trip characteristic.

The Autel Robotics EVO II Car Charger is a fast and reliable charging solution for your drone and remote controller on the go. Charge in just 90 minutes and travel with peace of mind.

Used Sonatest CDA2525270T, 2.5 MHz 1" twin element compression wave ultrasonic transducer with top exit for reliable thickness surveys and flaw detection in steel, pipelines, and tanks. Compatible with Sonatest Wave, Sitescan D-50, and Masterscan D-70. Order from Cartoli or call 1-833-322-7865.

Complete Pruftechnik ROTALIGN Ultra kit with Shaft Alignment Advanced license, ROTALIGN sensor and laser, Bluetooth module, chain and magnetic bracket sets, cables, software, and ABS transport case.

Allen-Bradley 800T-XA contact block delivers 1NO/1NC switching for 30.5 mm Bulletin 800T and 800H operators, providing dependable control panel signaling in modular industrial systems.

Adam Equipment Aqua ABW 4S Scale: Durable, IP68-rated washdown scale with stainless steel design. Fast, precise weighing with LED display and rechargeable battery. Ideal for food processing.

RP Lighting + Fans RXL5RW LED Exit Sign delivers 120/277V operation, red LED exit visibility, and 90-minute emergency illumination in a white thermoplastic housing for egress marking.

Allen-Bradley 1489-M1C100 miniature circuit breaker delivers 10 A, 1-pole thermal-magnetic branch circuit protection with a C trip curve for control panels and IEC applications.

Fluke 87V/E2 multimeter kit delivers precise True-RMS testing for industrial electricians, with VFD accuracy, peak capture, and essential accessories.

AEMC 6418 Clamp-On Ground Resistance Tester: Fast, clamp-on testing with memory, alarm, and no auxiliary rods—ideal for reliable earth measurements.

Corsair Dominator 20GB DDR2 800MHz RAM: High-performance gaming memory, tested for speed and reliability. Boost your desktop's power with unmatched reliability and speed!

Introducing the OWON XDG2100 Arbitrary Waveform Generator – Precision and Versatility at Its Peak.

Introducing the OWON XDG3082 Arbitrary Waveform Generator - Precision and Versatility Redefined.

AEMC AmpFlex flexible Rogowski coil sensor, 36" length, measures AC current up to 3000A with 10mV/1mV per amp output for tight spaces.

Hydrajaws M2000 scaffold tie tester kit supports 0-25kN pull testing for scaffold anchors, with analogue and digital gauge options.

Certified pre-owned Panametrics ABWM-5T 70 70° shear wave angle beam wedge. Designed for 0.50" transducers using the Accupath series. Ideal for high-angle weld inspections in steel.

Olympus OmniScan X3 64:128 phased array and TFM flaw detector with 64 pulsers, 128 receivers, full 64 element aperture, up to four TFM groups, live TFM envelope, AIM visualization, IP65 enclosure, and 10.6 in touchscreen.