Search results for: 'ledhhhhhh'

The Hydrajaws standard digital gauge provides many advantages over the standard analogue gauge including more accurate and clearer results.

AEMC 2118.78 Kelvin probes bring crisp 10A low-resistance test contact with spring-loaded rotating tips, 4-wire measurement support, and 20 ft leads.

AEMC 2118.77 Kelvin Probes deliver 10A spring-loaded four-wire resistance testing with 10 ft leads for micro-ohmmeters using 4 mm safety terminals or 4–6 mm binding posts.

Allen-Bradley 100-C12ZA10 3-pole contactor brings IEC motor-control switching with a 220V DC coil, 1 NO auxiliary contact, and marked AC load ratings.

Eagle Eye DLV-Pro Data Logging Voltmeter for recording, viewing, and analyzing cell voltages from 0-20 VDC with on-site statistical, graphical, and discharge test analysis.

The Fluke 87V MAX Digital Multimeter Solar PV Lead Kit combines the IP67-rated 87V MAX True-RMS multimeter with Pomona PVLEAD1 MC4 solar PV connector test leads. Designed for electrical troubleshooting in harsh environments, it supports AC/DC voltage up to 1000 V, 10 A current, resistance, capacitance, frequency, and temperature measurements. The included MC4 to 4 mm leads enable direct voltage verification on photovoltaic arrays while maintaining IEC / EN 61010-031 compliance.

AEMC OX 5042B Handscope is a 3-in-1 oscilloscope, multimeter, and harmonic analyzer kit with 2 isolated channels, 40MHz bandwidth, and long battery life.

Thermo Scientific Niton XL2 980 GOLDD XRF Analyzer with General Metals options for rapid handheld metals identification, alloy analysis, incoming material checks, and field-ready composition screening.

Adam Equipment SHS 600a Crane Scale: Durable, portable, and precise, ideal for weighing heavy loads in industrial environments. Safe, efficient, and easy to use.

Lithonia Lighting 563-252 delivers NEMA twist-lock photo control functionality for compatible TF, TFH, TFD, TFG, or TFL fixtures equipped with a PER receptacle.

The VeEX FX150 is a handheld optical time domain reflectometer configured with 1310 nm and 1550 nm singlemode wavelengths. The platform is capable of OTDR measurement, event analysis, trace review, and bundled Optical Power Meter (OPM), Optical Light Source, and Visual Fault Locator (VFL) operation for fiber testing workflows.

Fluke Networks MT-8200-49A MicroMapper LAN wiremap tester provides LED fault indication, toner generation, and detection of opens, shorts, miswires, reversed pairs, and split pairs. Main unit only; no remote included.

Portable, durable, and easy to use Supports 2.5mm universal connectors (for FC/SC/ST) Dust-proof & crash-proof cap design for laser head Wavelength 650 nm±10 nm Output Power 1 mW Laser CLASS II Tested fiber length 3-5 km Power (batteries) AA (1.5 V) x 2 Connector 2.5mm universal connector for FC, ST and SC OAL 7 in. Operating Temperature -10~55°C Storage Temperature -10~70°C Optional Accessory LC 1.25mm adaptor(5MT-7601-LC)

2-5 Mins quick heat up time 1.5 hour operation time Cordless design to work anywhere Ceramic heater provides stable temperature Drip control prevents unwanted glue on project Status indicator light Convenient USB charging Consumption: 8W Flow Rate: 3g per min Preheating Time: 2 - 5 min Input Voltage: 5V Melting Temperature: 266°F Indicator Light: Blue (In Use) / Green (Fully Charged) / Red (Charging) Glue Sticks: Ø7mm (not included) Charging Time: 200 minutes Operating Time: 90 minutes Power Source: 3.6V Li-ion Battery (2000mAh)

Full assortment of test functions Precise ACV ACA True RMS Measurements Overload Protection Non-contact voltage detection LCD Display 3-5/6 5999 Counts DCV 600mV/6V/60V/600V ±（0.5% +5d） ACV 600mV/6V/60V/600V ±（1% +4d） TRUE-RMS DCA 60mA/600mA ±（1.2% +5 d）, 10A±（3.0% +5d） ACA 60mA/600mA ±（1.5% +5 d）, 10A±（3.0% +5d）TRUE-RMS Frequency 9.999Hz/99.99Hz/999.9Hz/9.999KHz/99.99KHz/999.9KHz/9.999MHz ±（1.5% +5d） Duty Cycle 21%~99%±（2.5% +5 d） ResistanceΩ 600Ω/6k/60k/600k/6M/60MΩ ±（0.8% +5d） Capacitance 60nF/600nF/6uF/60uF/600uF/6mF ±（4% + 5d）,100mF ±（4% +10d） Temperature(C/F) -20℃~1000℃±（1% + 3d） -4℉~2372℉±（1% + 3d） Continuity Buzzer ≤30Ω , buzzer beeps Diode Test Y NCV Detection Y Data Hold Y LED Light Y LCD Backlight Y Analog Bar Y Low Battery Indication Y Low Battery Indication Y Accessories Test Lead, K-type thermocouple, Manual Power 1.5V AAA x 3pcs (Not Included)

Phoenix Contact PLC-BSC-24DC/1/ACT relay base for PLC-INTERFACE output functions with screw connection, 24 V DC input, 1 N/O contact, and load return line connection.

Hubbell CS320I is a commercial-specification 3-way toggle switch rated 20A at 120/277V AC. It is side wired only, supports #14 to #10 AWG copper wire, and features an ivory nylon toggle with thermoplastic construction.

Fluke’s 1734/EUS is a three-phase electrical energy logger with Wi-Fi and flexible current probes, enabling continuous logging of voltage, current, power, energy, and power factor. Ideal for facility energy audits, load studies, and performance monitoring across distribution panels.

Square D CC54.5 thermal unit provides reliable Class 20 overload protection for Type S motor starters. Ideal for motors in the 32.4–39.1A range.

General Electric THQB2120 breaker delivers reliable 20A thermal-magnetic protection for THQB panelboards, featuring bolt-on mounting and a 10kA interrupt rating.