Search results for: 'automa'

High quality termination Tin plated copper UL and RoHS Provides high quality termination and years of trouble free service All ferrules are copper with tin plating (UL* and RoHS)

Allen-Bradley 855T-B24DN3 delivers crisp green visual signaling in a 70 mm Control Tower stack light format with 24V AC/DC steady incandescent operation.

The Westinghouse 5X00070G33 delivers precise multi-channel voltage signal acquisition for Ovation DCS environments, supporting ±5V and ±10V inputs with isolated channels and high-resolution data capture for reliable industrial monitoring.

ABB 1SVR427032R0000 switch mode power supply delivers 24 VDC output at 2.5 A from a 100–240 VAC input, with adjustable output voltage from 24–28 VDC and 60 W max load capacity for control and industrial power applications.

Emerson DeltaV KJ3001X1-BD1 discrete input module for 120 VAC dry contact monitoring. This 8-channel module provides front-panel status indication and installs on DeltaV I/O hardware.

Siemens 3RP1505-1BQ30 SIRIUS timing relay with multi-function operation, 2 changeover contacts, 15 time setting ranges, LED indication, and screw-type terminals.

The Emerson KJ2006X1-BK1 Virtual I/O Module (VIM) is designed for DeltaV Safety Instrumented Systems (SIS) with CHARM I/O technology. It simulates up to 96 individually addressable I/O channels for offline system development, logic validation, commissioning preparation, and operator training without physical field wiring.

The Dwyer AP-7021-153-39 is a diaphragm operated pressure switch with an adjustable 10 to 125 psig range. It uses an SPDT snap acting switch in a general-purpose enclosure and is designed for air, non-corrosive gases, or compatible liquids.

The Allen-Bradley AK-R2-360P500 Dynamic Brake Resistor is an external medium-duty resistor kit designed for PowerFlex 70 and 700 series drives. It provides 360 ohms of resistance with an 86 watt continuous power rating to dissipate regenerative energy during motor braking.

The MEAN WELL HRP-600-15 is a single-output enclosed AC-DC power supply delivering 15 VDC at up to 43 A. It features built-in active power factor correction, fan cooling with ON-OFF control, and protection against overload, over-voltage, and over-temperature for industrial power applications.

The ABB Bailey IMASI02 is an Analog Slave Input module for the Infi 90 Process Management System. It converts analog field signals into digital data for processing by a Multi-Function Processor and interfaces up to fifteen process signals through a single MMU slot.

The ABB Bailey IMFCS01 is an intelligent Frequency Counter Slave Module for INFI 90 and Net 90 DCS platforms. It processes high-speed pulse inputs from field sensors and communicates frequency and period data to a Multi-Function Processor via the slave expander bus for speed monitoring and control.

Phoenix Contact QUINT-DIODE/12-24DC/2X20/1X40 is a DIN-rail mounted redundancy diode module for 12–24 V DC systems. It decouples parallel power supplies to increase system availability, supporting 2×20 A redundancy or 1×40 A increasing power operation.

The Yamatake Honeywell J-HMM00 is a high-level analog input module designed for Distributed Control System (DCS) architectures. Operating on 24 VDC with 60 mA current consumption, it supports multi-point analog signal acquisition for integration within compatible control systems such as MSC10.

The Bently Nevada 16699-03-05-03 is a velocity seismoprobe vibration sensor used for industrial condition monitoring. It converts mechanical vibration into an electrical signal and is designed for housing-mounted vibration measurement on rotating machinery. The sensor features a metal cylindrical body, stud mounting, and a top-mounted three-screw terminal block for field wiring.

The Square D 8501NR61 is an 11-pin plug-in relay socket designed for use with compatible Square D relays and timers. It features single-tier screw clamp terminals and supports both panel and DIN rail mounting for industrial control applications.

Fluke 820-2 LED Stroboscope enables non-contact rotational speed diagnostics with high-intensity LED output, quartz accuracy, and sharp stop-motion imaging.

Toshiba VF-S11-4015PL-WN industrial inverter delivers precise speed control for 3-phase induction motors, supporting 1.5kW operation on 380–500V systems with compact panel-mount design and flexible control modes.

Fluke SOL-INS87-KIT delivers complete PV testing with I-V curve tracing up to 1500V, insulation testing, clamp measurements, and multimeter diagnostics.

Alstom ESA-700 UV flame signal analyzer for Limelight Exacta systems, providing fast flame failure detection and reliable burner monitoring in large combustion equipment using 21.6–26V AC input power.

Allen-Bradley S50411-002 dynamic brake board enables controlled motor deceleration by managing regenerative energy through external brake resistors in compatible 1305 variable frequency drives.

Allen-Bradley 1334-MOD-W3 run/fault contact mod kit adds isolated relay outputs for remote drive status monitoring on Bulletin 1334 and 1335 AC drives, supporting external control and annunciation systems.

General Electric 193X532ABG04 field service control module for control/repair replacement use in compatible GE industrial systems. Identified by model number for accurate part matching.

Allen-Bradley 1489-M-C16A is a 3-pole 16A miniature circuit breaker with C-curve tripping for branch circuit protection in industrial control panels, supporting DIN rail mounting and UL 489 compliance.