Search results for: 'valued'

Wöhler Camera Holder VIS 700 keeps the 1.5" camera head positioned face down for controlled visual inspection work with the VIS 700 system.

AEMC 2118.73 Kelvin Probes provide low-resistance measurement connections for compatible micro-ohmmeters. Featuring 10 ft leads, spring-loaded probes, 4 mm banana plug termination, and a set of five fork terminals for versatile connection methods.

Wohler 2752 Perlon Star Brush delivers soft Perlon sweeping for stainless steel chimneys, vents, PVC pipes, and duct lines where flexible, surface-conscious deposit removal is required.

Banner LM3 photoelectric sensor logic module delivers ON-OFF logic with LIGHT/DARK operate selection for MULTI-BEAM 3- and 4-wire sensors.

Orbit OF7716 2 in steel EMT set-screw coupling connects two EMT thinwall conduit ends to extend raceways in dry locations with zinc electro-plated steel construction.

Eaton DILEM-10 mini contactor delivers 8.80A switching, three-pole FVNR control, 1NO contact configuration, and 110–120 Vac coil operation in a compact IEC frame.

BROSA EBM 6111 load cell delivers 100 kN force measurement for felt tension control and industrial monitoring, with a flange-mount design and integrated cable for fixed installation.

Siemens POL906.00/MCQ Communication Module supports POL6xx-connected control architecture in a compact modular format, with visible LON-SCC identification plus on-product IP20, -40 to 70, 80 mA, and 0.4 W markings.

Bently Nevada 330102-00-40-10-02-00 proximity probe cable assembly for 3300 XL 8 mm monitoring setups, built for proximity measurement connection in machinery monitoring systems.

Lenze EWAL001ZM-001 servo blower cable assembly connects external fan systems used with compatible L-force servo motors, supporting integrated cooling cable routing for MCS, MCA, and MQA applications.

Eaton B-Line BPR2 is a two-device metal protector plate designed for receptacle, GFCI, decorator, or blank openings to help block drywall mud, paint, and debris during installation.

ENM MT101R is a self-powered electric motor hour meter for AC or DC motors. It uses an external sensor on a 4 ft cable to detect motor magnetic field and display true motor run time.

Johnson Controls P10BC-7C low pressure control, SPDT, 1-stage, 3 to 20 psi range, 12 psig factory setting, 2 psi switch differential, with barbed fitting.

Wohler 3354 electrochemical oxygen sensor for A 400 and A 400 PRO flue gas analyzers. Field-replaceable design with 0.0 to 21.0 Vol.-% O2 measurement range.

INNO Instrument PTB02 is an external sensor connection fittings accessory identified in the SPAW7000 accessory catalog for power analysis wavecorder setups.

INNO Instrument PAC-1004 Safety Adapter with safety connector and spring hold type. Rated 600V, CAT II, 10A, with red and black adapter components.

The Fluke Networks TRC-SM-VERIFY-MMC24U is a reference-grade single-mode verification test reference cord designed for testing unpinned MMC 24-fiber cables with the CertiFiber™ Max Optical Loss Test Set. It features 24 fibers, Type A polarity, MMC APC/U connectors, and a 1-meter length to support accurate reference verification.

Fluke Networks TRC-SM-VERIFY-MMC16U is a reference-grade single-mode verification test reference cord for CertiFiber™ Max optical loss testing. It is a 1 m, 16-fiber, Type A MMC cord with APC/U connectors, used to verify proper reference setup accuracy.

The Fluke i400s AC Current Clamp extends current measurement capability for multimeters, power quality analyzers, and oscilloscopes. It supports AC current ranges from 0.5 A to 400 A with dual output scaling and a compact clamp design rated for CAT IV 600 V environments.

The Banner BA1.53SMTA is a high-temperature diffuse-mode bifurcated glass fiber optic cable with stainless steel monocoil sheathing. It features a tight right-angle side-view sensing tip, 36-inch fiber length, and 2.3 mm bundle diameter for reflective sensing applications.

The Advance L-220-F is a magnetic reactor ballast designed to operate two 15W or 20W preheat fluorescent lamps at 120V AC, 60 Hz. It regulates lamp current using an inductive core and requires external starters for lamp ignition in preheat fluorescent systems.

The Murr Elektronik 23050 is a three-phase RC motor suppressor designed to reduce induced voltage peaks in AC motor applications. Rated for up to 575 VAC at 50/60 Hz and 4 kW engine power, it supports star-connected RC suppression and installation close to the interference source.