Pull Tester Kits 48 Items

Hydrajaws 200-009 M2000 PRO Imperial Digital Tester Kit delivers 0-25kN/5620lbf pull testing for anchors and fixings with a digital gauge, 50mm stroke, and a universal adaptor set.

The Hydrajaws Hydraulic Hollow Cylinder Tester Kit consists of a two-speed manually operated aluminium hand pump, digital gauge, 3m hose and either 180kN (40466lbf), 370kN (83179lbf) or 500kN (112405lbf) hollow bore aluminium cylinder which is more portable and weighs less than a traditional steel cylinder.

Revolutionize your anchor testing with the Hydrajaws M35+! This lightweight, modular pull tester features Easi-Effort® technology for anchor and eyebolt testing up to 35kN (7,868 lbf) and swaged components on engineered lifeline systems testing up to 20kN (4,496 lbf).

The Hydrajaws Hydraulic Hollow Cylinder Tester Kit consists of a two-speed manually operated aluminium hand pump, digital gauge, 3m hose and either 180kN (40466lbf), 370kN (83179lbf) or 500kN (112405lbf) hollow bore aluminium cylinder which is more portable and weighs less than a traditional steel cylinder.

The Hydrajaws M2000 Safety Harness & Eye Bolt Tester Kit is engineered for professionals who need to meet the demands of BS 7883:2019 for eye bolt anchor fixings used with personal fall protection and anchorage devices (BS EN 795). Compact, rugged, and easy to use, this complete kit delivers precise, repeatable test results whether on site or in the workshop.

Hydrajaws Heavy Duty Tester: Reliable, accurate load testing up to 145kN (32,597 lbf). Includes versatile adaptors and an easy-to-use digital gauge. Perfect for structural testing.

The Hydrajaws Hydraulic Hollow Cylinder Tester Kit consists of a two-speed manually operated aluminium hand pump, digital gauge, 3m hose and either 180kN, 370kN or 500kN hollow bore aluminium cylinder which is more portable and weighs less than a traditional steel cylinder.

The Hydrajaws standard digital gauge provides many advantages over the standard analogue gauge including more accurate and clearer results.

The Hydrajaws standard digital gauge provides many advantages over the standard analogue gauge including more accurate and clearer results.

The Hydrajaws Safety Lifeline Cable Tester Kit1 (Frame Only) for operators who already own an M2000 Tester, enables engineers to validate the installation of swaged components of new or existing engineered lifeline systems to ensure compliance with BS 7883 up to a maximum tensile load of 25kN.

The Hydrajaws M0095 Long Stroke Roofing Screw Tester Kit determines the strength and suitability of fixings in built-up roofing constructions where performance data is unavailable. The long stroke of 3.15'' means that once tested the fixing can be completely extracted.

The Hydrajaws Wall Tie Tester Kit MK2 is used for testing all types of remedial wall tie. Trusted by market-leading companies, the Wall Tie Tester Kit is an essential tool for carrying out testing procedures in line with BRE Digest 401. Manufactured to exacting high standards, the Hydrajaws Wall Tie Tester Kit contains a small bolt tester adaptor and two threaded rod adaptors (M5 and M6) to test up to a maximum tensile load of 10kN. The three-legged load spreading bridge keeps reaction loads away from the fixing allowing results to be more consistent.

Hydrajaws M0097 Tension Meter Tester: High-precision tool for testing wire ropes up to 40kN. Lightweight, durable, and comes with a robust carry case for easy transport.

Hydrajaws M2000 Material Bond Tester Kit brings precise 25kN pull-off testing to concrete, screeds, coatings, laminates, plastics, paints, and enamels in lab, workshop, and on-site workflows.

Hydrajaws M2000 scaffold tie tester kit supports 0-25kN pull testing for scaffold anchors, with analogue and digital gauge options.

Hydrajaws Heavy Duty Threaded Stud Adaptor provides reliable anchor testing support for threaded sleeve and stud anchors, helping deliver accurate pull testing across compatible sizes.

1 x Hydrajaws Threaded Stud Adaptor

Hydrajaws Verify Torque Bluetooth torque wrench adapter delivers digital torque measurement, cloud-based traceability, and compliance reporting via the Hydrajaws Verify App for accurate and efficient torque verification.

The Hydrajaws M35+ Large Bridge Expander is an essential upgrade for professionals who require enhanced load capacity, extended reach, and uncompromising reliability. With its 14,613 lbf (65 kN) Safe Working Load and 12.2 in. (310 mm) span, it enables precise, safe testing across a broader range of building materials.

The M35+ medium bridge is an optional extra that extends the Standard M35+ Digital Pull Tester to span 8.27 in and increases the capacity to 65kN (14,613 lbf). The leg height can also be extended with a further accessory set of 3 leg extensions

The M35+ bridge leg extensions are an optional extra that extends the bridge's height capacity by 96mm.

For M16 nuts, the bolt tester adaptor directly engages the nut in the pulling jaw.

For testing threaded fixings when using the M2050 Pro Tester

For testing threaded fixings when using the M2050 Pro Tester

For testing threaded fixings when using the M2050 Pro Tester