Search results for: 'maximum'

Sixnet SixTRAK ST-DI-024-16M delivers 16 high-density discrete inputs for 10-32 VDC local I/O expansion in SixTRAK systems, supporting compact panel layouts with input-to-ST-Bus isolation in a module-only configuration.

Allen-Bradley 1771-OW16-B is a 16-channel PLC-5 relay output module supporting 24–250VAC and 24–150VDC loads, delivering isolated electromechanical switching for industrial control applications.

Emerson Ovation 1C31132G01 is an analog output personality module designed for four-channel Ovation analog output subsystems, routing field signals for 0-5 V, 0-10 V, and 0-20 mA output configurations.

Allen-Bradley 1771-ID16/A AC/DC 120V isolated input module for 1771 I/O chassis. This 16-point module supports 120V AC/DC inputs and uses backplane power.

Allen-Bradley 1769-L33ER CompactLogix 5370 L3 controller delivers Ethernet/IP connectivity and modular Compact I/O expansion for medium-scale industrial automation systems.

Allen-Bradley 1771-IAD digital input module delivers 16 channels of 120V AC/DC signal monitoring for PLC-5 systems, enabling reliable connection of switches, relays, and discrete field devices.

Allen-Bradley 1492-IFM20F-2 interface module delivers 20-point feed-through wiring for PLC I/O systems, supporting up to 264V AC/DC with DIN rail mounting for organized control panels.

Fluke 80PK-8 Type K pipe clamp thermocouple probe for fast pipe-surface temperature readings on 1/4–1-3/8 in lines, with durable ribbon sensor and 40 in lead.

Allen-Bradley 1756-CN2R ControlLogix ControlNet communication module designed for redundant network architectures, providing high-speed ControlNet connectivity for distributed I/O and PLC systems.

AutomationDirect D2-08NA-1 is an 8-point AC input module for DL205 PLC systems with 80-132 VAC input range, 47-63 Hz operation, removable terminal connection, and logic-side status indication.

The Dwyer AP-7021-153-39 is a diaphragm operated pressure switch with an adjustable 10 to 125 psig range. It uses an SPDT snap acting switch in a general-purpose enclosure and is designed for air, non-corrosive gases, or compatible liquids.

The Honeywell 621-9939 Serial Link Module is a communication interface for Honeywell Series 9000 and IPC 620 control systems. It manages serial I/O data exchange between the main processor and distributed serial devices using dual asynchronous channels and RS485 connectivity.

Phoenix Contact RAD-IN-8D is an 8-channel digital input extension module for the Radioline system. It accepts 5–30 V AC/DC signals, mounts on a 35 mm DIN rail, and connects via a bus foot connector for modular industrial automation signal acquisition.

Allen-Bradley 1772-SD2 remote I/O scanner enables PLC-2 processors to communicate with remote I/O racks, supporting up to 1792 I/O points with serial twinaxial connectivity and LED status indicators.

Allen-Bradley 1334-MOD-W3 run/fault contact mod kit adds isolated relay outputs for remote drive status monitoring on Bulletin 1334 and 1335 AC drives, supporting external control and annunciation systems.

Omron CJ1W-PD025 PLC power supply unit brings 24 VDC input power to CJ-series control racks with 5.0 A at 5 VDC, 0.8 A at 24 VDC, and 25 W capacity for modular automation systems.

Sick DFS60B-BDPA10000 incremental encoder with 10,000 PPR resolution, 10 mm blind hollow shaft, programmable TTL/HTL output, and radial M23 12-pin male connector for industrial motion control.

Panasonic TH2376 is a TH23 series panel-mount hour meter rated for 115 to 120V AC at 60 Hz. It features a reset function and displays elapsed time from 0 to 9999.9 hours in 0.1-hour increments. Designed in DIN 48 size, it includes mounting bracket and decorative nut.

The GE Fanuc IC660BBR101 is a Genius I/O relay output block providing 16 normally open relay outputs. Designed for distributed control systems, it supports 115/230 VAC block power, individual output status LEDs, and compatibility with a wide range of low-power AC and DC control devices.

AEG Modicon PC-A984-130 is a compact PLC CPU delivering reliable Modbus control, 4K user logic memory, and fast 5 ms/k scan time for Modicon 984 automation systems.

Allen-Bradley 1771-A2B PLC-5 8-slot I/O chassis provides a stable backplane platform for 1771 modules, supporting modular control system expansion with secure back-panel mounting.

Allen-Bradley 1771-A4B PLC-5 16-slot I/O chassis provides a backplane for mounting 1771 I/O modules, distributing 5V DC power, and supporting industrial PLC-5 control system expansion.

FM-IUN102 Input Universal Function Module: Seamless integration with DCM & XM for RTD, voltage, current, and binary inputs. Reliable, compact, and high-performance.

Allen-Bradley 1771-A1B/B is a 4-slot PLC-5 I/O chassis designed to house processors, power supplies, and 1771 I/O modules, providing reliable backplane connectivity for panel-mounted industrial control systems.