Search results for: 'leading'

AEMC 2118.84 Spring-Loaded Kelvin Probe Set delivers accurate low-resistance measurements using 4-wire Kelvin methodology. Featuring pistol-grip probes, 25A current rating, and 10.33 ft leads for use with compatible micro-ohmmeters.

AEMC 2118.85 25A Kelvin Probes deliver spring-loaded pistol-grip contact for 4-wire low-resistance measurements with compatible micro-ohmmeters.

Pomona 5953A adjustable tip test probe set includes one red and one black probe with retractable stainless steel needle tips adjustable from 0 to 3 inches. Designed with shrouded banana plugs and silicone-insulated leads, the set is rated CAT II 600 V and supports up to 3 A.

AEMC 2118.78 Kelvin probes bring crisp 10A low-resistance test contact with spring-loaded rotating tips, 4-wire measurement support, and 20 ft leads.

AEMC 2118.73 Kelvin Probes provide low-resistance measurement connections for compatible micro-ohmmeters. Featuring 10 ft leads, spring-loaded probes, 4 mm banana plug termination, and a set of five fork terminals for versatile connection methods.

Fluke TP220 industrial test probes include one red and one black probe with sharp stainless steel tips for reliable electrical contact. SureGrip overmolded handles and a flexible finger barrier support steady probe placement during measurement tasks. Designed for use with compatible Fluke test leads.

The Pomona 6341 Precision Electronic Probe Kit includes one red probe and one black probe with a full set of five replaceable tip styles. The miniature probe design supports probing of high-density circuits. Gold-plated pogo pin tips maintain constant pressure on test points for consistent readings. Silicone insulated 20 AWG leads provide flexibility and temperature resistance. Rated for 1000 VRMS and 3 A.

Fluke TLK290 probe set: Flexible sockets and alligator clip for safe, precise testing of motors, 3-phase plugs, and 4–8 mm connections.

HARTING 09150006206 silver-plated Han D female crimp contact with AWG 14 capability delivers reliable 10 A performance and low ≤3 mΩ resistance for industrial connector applications.

The Fluke AC280 SureGrip™ Hook Clips are a pair of nickel-plated electrical test clips designed for secure, hands-free measurements. Featuring a narrowing profile and controlled hook opening, they support precise connections and are rated up to CAT III 1000 V.

Fluke TP38 probes offer slim insulated tips for safe access to tight terminals, featuring hardened stainless steel tips and CAT IV 600V safety rating.

The Fluke AC285 SureGrip™ Alligator Clips include one red and one black large alligator clip with nickel-plated steel jaws. Designed with rubber overmolded SureGrip surfaces, they provide a stable, comfortable grip for electrical testing. Rated CAT IV 600 V, CAT III 1000 V, 10 A.

Fluke Networks DSX-PLA004 ensures reliable CAT 6A/Class EA permanent link testing for network installers and cable certification professionals.

AEMC 2135.82 Calibration Loop for Model 6474 supports ground resistance tester calibration and verification workflows for compatible CA 6474 systems.

The Bently Nevada 02003984 is a cable extension assembly designed for use within Bently Nevada proximity measurement systems. This assembly provides an intermediate electrical connection between system components using a factory-terminated cable with integrated connectors.

AEMC 2129.95 RTD Temperature Probe provides temperature compensation capability for AEMC 6250 and 6255 testing systems, helping improve measurement accuracy during resistance testing where ambient temperature variations affect results.

Fluke TP2 Slim-Reach test probe set includes one red and one black probe with 2 mm diameter stainless steel tips. Designed for probing closely spaced or recessed terminals, the probes are rated for 10 A and suitable for CAT III 1000 V and CAT IV 600 V environments.

The Fluke TP88 Rigid Back Probe Pin Set includes two fine-tip, rigid back probe pins designed for use with 2 mm test probes. The red and black insulated pins slide onto compatible probes and allow access between weather pack seals and wires. Tested to 60 V DC.

INNO Instrument PAL-1002 safety BNC-to-BNC cable for connecting current sensors and measurement signals with compatible INNO power analyzers and digital power meters.

Pomona 4555-2 is a Do-It-Yourself Minigrabber test clip designed for hands-free electrical testing. Accepts wire up to 0.144 in diameter and 0.025 in square pins. Rated to 5 A and 300 Vrms for hands-free use. Supplied as a package of ten red test clips.

Pomona Model 4555-0 is a do-it-yourself minigrabber test clip designed for hands-free electrical testing. It accepts wire diameters up to 0.144 in and uses a gold-plated beryllium copper contact with stainless steel spring. Supplied as a 10-piece black set.

INNO Instrument PAL-1003 external sensor connection cable with BNC connector for connecting external CT or VT sensors to compatible INNO Instrument SPA series power analyzers.

Fluke AC285-FTP Clips: Secure, high-voltage alligator clips and adaptors for FTP-1 and FTPL-1 probes. 1000V rated, firm SureGrip design.

Brady WML-0811-202 self-laminating B-292 vinyl labels deliver durable wire ID for legacy Brady printers, offering strong adhesion and reliable cable marking.

Brady WML-311-292 labels offer durable, self-laminating wire ID for 10–6 AWG wires, using B-292 vinyl for clear, long-lasting identification with Brady printers.