Search results for: 'margin 0'

INNO Instrument SCTX60 current sensor with 0-60A DC range, 60Apeak AC range, DB9 connection, 28 mm aperture, and DC-800 kHz measuring bandwidth for precision current measurement applications.

Used Sonatest SSG50502 shear wave angle beam ultrasonic transducer with 2.25 MHz frequency and 0.50" crystal diameter. Features a BNC connector and is designed for high-accuracy flaw detection. Tested and certified for immediate deployment.

INNO Instrument SCTH600 pass-through current sensor with 0 to 600A DC and 600A peak AC measurement range, DB9 connector, 1:1500 ratio, and DC to 300 kHz bandwidth.

INNO Instrument SCTH60 current sensor with 0–60A DC range, 60Apeak AC range, 28 mm aperture, DB9 connector, and DC to 800 kHz bandwidth for precision current measurement.

The INNO Instrument SC-SM-UPC-30 is a 10-pack of SC/UPC single-mode splice-on connectors designed for 3.0mm fiber cables. Each connector is factory pre-cleaved and pre-polished to support consistent optical performance, with typical insertion loss of 0.15 dB and return loss ≥55 dB.

The INNO Instrument SC-SM-UPC-30S is a 10-pack of SC single-mode UPC splice-on connectors designed for 3.0mm jacketed fiber. Using fusion splice termination, these short boot SOC connectors provide stable optical performance without field polishing or index-matching gels.

The INNO Instrument SC-SM-UPC-09 is a 10-pack of single-mode SC/UPC splice-on connectors for 900µm fiber. Designed for fusion splicer termination, these connectors eliminate polishing, adhesives, and mechanical splicing. With typical ≤0.2 dB insertion loss and ≥55 dB return loss, they support G.652D and G.657A2 fiber types.

Used Waygate 57K0201P1 45° shear wave angle beam wedge designed for 0.50" ultrasonic transducers. Optimized for carbon steel inspections using Accupath series transducers. Fully tested, certified, and ready for immediate use.

Fluke TiR32 60Hz 320×240 Thermal Imager. Used, function-tested. Includes two BP195 batteries, BC1 dual charger, AC adapter, SmartView software, and hard case for professional building diagnostics.

INNO Instrument SCTH200 pass-through current sensor with 0–200A DC range, 200A peak AC, DC to 500kHz bandwidth, DB9 connector, and Φ28mm aperture.

Easy-Laser Case 3 shim kit with Types A/B/C/D, 0.05–2.00 mm stainless steel shims, permanently marked and burr-free. Foam-organized case for precise machine alignment setups.

INNO Instrument SCTX600 current sensor for 0 to 600A DC and 600Apeak AC measurement, with Ø30.9 mm aperture, DB9 connector, and ±15V to ±24V supply requirement.

Used Waygate 57K0203P1 70° shear wave angle beam wedge engineered for 0.50" ultrasonic transducers. Specially optimized for carbon steel inspections with Accupath series transducers. Thoroughly tested and ready for field deployment.

The INNO Instrument SC-SM-APC-30S is a 10-pack of single-mode SC/APC splice-on connectors designed for 3.0mm fiber cables. Featuring a short boot configuration, these pre-cleaved and pre-polished connectors enable fusion-spliced terminations using compatible INNO Instrument fusion splicers.

INNO Instrument SCTX1000 is a 1000A AC/DC pass-through current sensor with 30.9 mm aperture, DB9 connection, DC to 300 kHz bandwidth, and ±15V to ±24V supply requirement.

Eaton DILM9-10 / XTCE009B10T 24V 50/60Hz 3-pole motor contactor with 9A AC-3 rating, 4 kW capacity, 1NO auxiliary contact, and screw terminals for dependable control of pumps, fans, conveyors, and OEM panels.

ETRI 148VK0282072 axial AC fan rated 115V AC, 50/60Hz, single-phase. Zamak housing with plastic impeller (UL 94 V0) and ball bearings. Thermally protected motor. 172 × 150 × 38 mm form factor with 305 mm leads (AWG20).

Lenze AC Tech M1430B MC1000 series variable frequency drive rated 3 HP (2.2 kW) with 400/480 VAC 3-phase input and 0–120 Hz output in a NEMA 1 enclosure. Front keypad/faceplate with control buttons is missing; front of drive is open.

INNO Instrument SPA1000 digital power meter with 1 power channel, AC/DC measurement, 100 kHz bandwidth, up to 1000 V and 20 A input, 4-item LED display, and harmonic measurement to the 100th order.

The INNO Instrument M9+ is a compact core alignment fusion splicer for single fiber SM, MM, DS, and NZDS applications. It features ultrafast splice and heating cycles, a 4.3-inch full touch LCD, automatic arc calibration, and integrated heater in a field-ready kit.

INNO Instrument SBT60 battery tester measures internal resistance and voltage using an AC four-terminal method, with 6 V and 60 V ranges, comparator functions, storage, and statistical analysis for battery testing and sorting.

Trend Networks LanTEK IV-500 R163000 Certified Pre-Owned Cable Certifier Kit with CAT6A VisiLINQ Adapters, Fiber Inspection Microscope Support, Tone Test and TeamViewer Remote Control Tools. Includes Main + Remote Units and Carry Case.

Moxa PWR-G7000-AC power supply module with 85–264 VAC input for ICS-G7000 series switches, supporting 47–63 Hz and 0–60°C operation in modular chassis.

INNO Instrument SPA3000 digital power meter with 3 power channels, up to 1000 V measurement, DC to 100 kHz bandwidth, and 4-item LED display for voltage, current, and power measurement.