Search results for: 'margin'

The INNO Instrument UN1CO Shoulder Strap is an accessory component for the UN1CO mobile workstation system. Designed for integration with the UN1CO work tray, it supports hands-free transport and stabilization of fiber optic splicing equipment during field deployment. This listing includes the shoulder strap only.

The Inno Instrument UN1CO Pole Mount Bracket is an accessory designed to secure the UN1CO work tray to utility poles and similar vertical structures. It provides a stable mounting interface for field fiber splicing applications. The bracket assembly includes integrated straps and a safety retention loop. UN1CO tray not included.

The INNO Instrument UN1COLK UN1CO Ladder Mount Work Platform is an ABS workstation designed for secure positioning on ladder rungs during fiber splicing operations. It provides a stable surface for INNO View series fusion splicers and common industry cleavers in elevated or confined environments.

The INNO Instrument UN1COMP is a modular fiber splicing workstation kit designed for mobile and elevated field operations. The system includes the UN1CO Mobile tray, tripod stand, ladder and pole mounting brackets, and the UN1CO backpack.  The included mounting options allow use as a wearable workstation and tripod-mounted table.

The INNO B-80 is a 16-position replacement blade designed for INNO fiber cleavers including V7, V7+, V10, V11, V12, V17, VF-15, VF-15H, and VF-78 models. Rated for up to 48,000 cleaves, the B-80 replaces the B-77 blade and supports consistent fiber cleaving in installation and maintenance environments.

Siemens 4700-DC3-11HN digital power meter providing true-RMS voltage, current, power, energy, demand, waveform capture, programmable relays, and analog output for industrial power monitoring systems 

Allen-Bradley 1746-A7 SLC 500 7-slot modular chassis supporting 1746 processors, I/O, and specialty modules. Designed for scalable PLC systems with side-mounted 1746 power supplies.

Olympus SA10-0L-IHC A10 phased array wedge with 0L longitudinal geometry, IHC housing, irrigation ports and carbide wear protection for A10-format phased array probes.

The Rigaku KT-100 is a handheld LIBS analyzer designed for rapid alloy identification and elemental analysis of industrial metals. This configuration includes permanent, transferable calibration matrices covering stainless steels, low alloy steels, aluminum grades, titanium, cobalt, nickel, and copper.

Olympus OmniScan X3 PA1664PR 16:64 phased array flaw detector with WiFi 5 adapter, IP65-rated enclosure, TFM-capable PAUT performance, and onboard scan plan tools for efficient weld and corrosion inspections.

INNO Instrument SCTH1000 is a pass-through current sensor for DC 0–1000A and AC 1000Apeak measurement, with DC–300 kHz bandwidth, ±(0.05% of rdg + 15 μA) accuracy, DB9 interface, and ±15V to ±24V supply.

Wöhler 4798 Power Supply provides charging and operating power for compatible Wöhler VIS 2xx and VIS 3xx inspection camera systems. The adapter accepts 100–240 V input and delivers regulated 18 V, 1.5 A output with a typical charging time of about 3 hours.

The INNO Instrument LI-ION 220 is a 7,800mAh rechargeable lithium-ion battery designed for the INNO Instrument View 500 Optical Time Domain Reflectometer (OTDR). It provides portable field power for fiber optic testing operations and supports extended operation of the View 500 platform during installation.

The INNO Instrument Li-ion 216 is a rechargeable lithium-ion battery pack designed for use with INNO Instrument Mini 2 series fiber optic test equipment, including the Mini 2 OTDR. The battery provides an output of 7.4V with a capacity of 4300mAh (31.82Wh) and installs directly into compatible INNO handheld instruments as a field-replaceable power source.

INNO Instrument OLL-500-652D-SC-UPC OTDR launch fiber reel provides a 500 m singlemode fiber link used with optical time domain reflectometers to stabilize launch conditions and support evaluation of fiber connections during installation, verification, and troubleshooting.

INNO Instrument FL-500-SC-APC is a 500 m singlemode OTDR launch fiber reel with SC/APC connectors designed to support fiber optic link testing. The launch fiber provides a buffer distance that allows Optical Time Domain Reflectometers to measure near-end connections and reflectance with improved visibility.

The INNO Instrument FL-500-SC-UPC is a 500-meter single-mode fiber optic OTDR launch cable designed for accurate fiber link testing. Built with 9/125 µm OS2 fiber and SC-UPC connectors on both ends, it creates the necessary launch distance to measure insertion loss and reflectance at the first connection point.

The INNO Instrument ACC-25-B AC Power Cable is a standard AC input cord designed to connect compatible INNO Instrument AC adapter blocks to a wall outlet. Featuring a 2-pin wall plug and C7 “Figure-8” connector, it supports 100–240V AC operation when used with approved adapters such as the JS-1618 and JS-180300 for View and M series fusion splicers.

The INNO Instrument CJ-11 is a vehicle power cable designed to operate and charge compatible INNO fiber fusion splicers from a standard 12V car cigarette lighter socket. It supports 9V–14V DC vehicle input and is compatible with select View and IFS series splicers and LBT battery packs.

The INNO Instrument LBT-3000-02 is an 11.1V, 3000mAh lithium-ion battery pack designed for the INNO Instrument A3 fusion splicer and compatible M-series models including M7 and M9. Rated at 33.3Wh, it provides portable operating power for field splicing applications and features an integrated LED battery status indicator.

The INNO Instrument LBT-30 is a 9000mAh lithium-ion rechargeable battery pack designed for INNO View series fusion splicers. Rated at 11.1V, it supports extended field operation and is compatible with View 7, 8+, 8 Pro, 8X, 12R, 12R Pro, IFS-10, and VIEW12R MAX models.

The INNO Instrument USB-7P is a proprietary USB Type-C to DC power and data cable designed for use with INNO View 12R and View 12R PRO ribbon fusion splicers. It provides a dedicated interface for DC power delivery and device communication specifically configured for INNO splicer architecture not intended for use with non-INNO devices.

The INNO Instruments UN1COMK UN1CO Mobile Smart Tray Kit is a portable workstation designed for fiber optic fusion splicing in elevated and field environments. The UN1CO Mobile Kit supports wearable, tripod, ladder, and pole-mounted configurations for field-based fiber installation work.

The INNO Instrument TS Pro Thermal Stripper is designed for removing coating and jacket from optic fibers, supporting single fiber up to 12 ribbon fibers. It accommodates coating diameters from 200 μm to 400 μm and provides selectable heating modes with controlled temperature settings.