Search results for: 'box'

Allen-Bradley 50388 Driver PCB Board provides signal conditioning and drive interface control for compatible Allen-Bradley automation systems, supporting reliable communication between logic modules and field devices.

Metso Automation PDP406 Distributed Processing Unit for MAX DCS delivers real-time control, alarming, and data processing for industrial automation systems requiring reliable distributed architecture.

Allen-Bradley S50403 driver board designed for 1334 series AC drives, supporting 30–50 HP motor control. This replacement PCB regulates motor speed and torque through controlled voltage and frequency output.

Allen-Bradley 800H-R3HA7 explosion-proof selector switch station with HAND-OFF-AUTO operation, built in a Type 7 & 9 aluminum enclosure for Class I, II, and III hazardous industrial locations.

Allen-Bradley 1336-CONV-SP4A converter power module designed for 1336 series adjustable frequency AC drives. Supports three-phase motor control applications within compatible 1336 drive platforms.

Allen-Bradley SP-135893 is a precharge SCR firing circuit board kit for 1336 series 75 HP drives, supporting controlled DC bus charging and reliable drive startup in industrial motor control systems.

Fluke FEV100/BASIC EVSE tester simulates an electric vehicle to verify charging station safety, run GFCI tests, and check voltage, duty cycle, and grounding.

Eaton XTCEXFAC20 auxiliary contactor supports control-panel auxiliary switching with two normally open contacts and visible AC/DC ratings.

Square D 83713 9070EO2D1 delivers open-type control circuit transformer operation with multi-tap primary input, 110/115/120 V secondary output, and 50/60 Hz ratings for industrial control panels.

SOR 4N3-KK4-N1-C1A-ZZ pressure switch delivers adjustable 2-25 PSI switching for industrial pressure control, with 750 PSI over range and 1000 PSI proof pressure for monitored process applications.

Flexco NC-36-1 conveyor belt hinge pin delivers a flexible 1/4 in nylon covered steel cable connection, pre-cut for 36 in belt width splices in compatible Flexco hinged fastener systems.

Mersen A155F1D0R0-65E is a 15.5kV, 65E ferrule-mounted Amp-Trap CS-3 medium voltage fuse for transformer and distribution line protection. It is an E-rated, current-limiting, non-venting fuse with visual blown-fuse indication. 

Minebea NMB-MAT 4715KL-05T-B40 is a 24V DC axial cooling fan with 119 x 119 x 38.4 mm dimensions, 3200 RPM speed, and approximately 118 CFM airflow for industrial equipment cooling.

Siemens 3RP1505-1BQ30 SIRIUS timing relay with multi-function operation, 2 changeover contacts, 15 time setting ranges, LED indication, and screw-type terminals.

AutomationDirect D2-08NA-1 is an 8-point AC input module for DL205 PLC systems with 80-132 VAC input range, 47-63 Hz operation, removable terminal connection, and logic-side status indication.

The Siemens 771-8STF2 is a Series 771 current-to-pneumatic transducer that converts a 4–20 mA DC input signal to a 3–27 psig pneumatic output. This standard-capacity unit provides 0.16 scfm output and is configured with terminal strip connection and F2 non-incendive hazardous location approval.

The Dwyer AP-7021-153-39 is a diaphragm operated pressure switch with an adjustable 10 to 125 psig range. It uses an SPDT snap acting switch in a general-purpose enclosure and is designed for air, non-corrosive gases, or compatible liquids.

The Phoenix Contact PSR-SCF-24UC/URM/2x21 is a safety coupling relay designed for safe switch-off applications in industrial control systems. It features two force-guided changeover contacts, 24 V AC/DC supply voltage, and supports safety category 1, PL c, and SIL 1 applications.

The TCI AS-B875-002 KLC25BE dv/dT Guard Output Filter is designed to protect AC motors driven by PWM variable frequency drives. Rated for 25 A, 3-phase, 480 V systems, it limits voltage spikes and dV/dt effects that can damage motor insulation and cabling.

The Allen-Bradley 1769-IQ16 is a Compact I/O 16-point, 24V DC digital input module for CompactLogix and MicroLogix 1500 systems. It supports sinking and sourcing inputs, provides LED status indication per point, and installs via DIN rail or panel mount.

The Honeywell 621-9939 Serial Link Module is a communication interface for Honeywell Series 9000 and IPC 620 control systems. It manages serial I/O data exchange between the main processor and distributed serial devices using dual asynchronous channels and RS485 connectivity.

Schneider Modicon AS-W808-002 remote I/O signal and power cable enables communication and auxiliary power between Modicon 984 and 800 Series PLC processors and remote terminal bases in legacy automation systems.

Mersen / Ferraz Shawmut A155F2D0R0-125E is a 15.5 kV, 125E medium-voltage, E-rated Amp-Trap® CS-3 series ferrule-mounted fuse. Designed for transformer and distribution protection, it provides current-limiting performance with visual blown-fuse indication and compatibility with standard spring-reinforced clips.