Search results for: 'wire stock'

Brady WML-311-292 labels offer durable, self-laminating wire ID for 10–6 AWG wires, using B-292 vinyl for clear, long-lasting identification with Brady printers.

Pomona 6733-2 is a 50 ft red silicone insulated test lead wire designed for fabricating custom test leads, jumpers, or patch cords. It uses 18 AWG bare copper conductors with a high strand count for flexibility and is the same wire used in Pomona test leads and patch cords.

Brady WML-0811-202 self-laminating B-292 vinyl labels deliver durable wire ID for legacy Brady printers, offering strong adhesion and reliable cable marking.

AEMC 2118.85 25A Kelvin Probes deliver spring-loaded pistol-grip contact for 4-wire low-resistance measurements with compatible micro-ohmmeters.

AEMC 2118.84 Spring-Loaded Kelvin Probe Set delivers accurate low-resistance measurements using 4-wire Kelvin methodology. Featuring pistol-grip probes, 25A current rating, and 10.33 ft leads for use with compatible micro-ohmmeters.

Pomona 5898 extra durable DMM test lead set with stainless steel probe tips, 4mm shrouded banana plugs, silicone-insulated leads, and CAT III 1000V rating for precise, reliable multimeter measurements.

AEMC 2118.77 Kelvin Probes deliver 10A spring-loaded four-wire resistance testing with 10 ft leads for micro-ohmmeters using 4 mm safety terminals or 4–6 mm binding posts.

AEMC 2118.78 Kelvin probes bring crisp 10A low-resistance test contact with spring-loaded rotating tips, 4-wire measurement support, and 20 ft leads.

The Fluke TP88 Rigid Back Probe Pin Set includes two fine-tip, rigid back probe pins designed for use with 2 mm test probes. The red and black insulated pins slide onto compatible probes and allow access between weather pack seals and wires. Tested to 60 V DC.

Pomona 4555-2 is a Do-It-Yourself Minigrabber test clip designed for hands-free electrical testing. Accepts wire up to 0.144 in diameter and 0.025 in square pins. Rated to 5 A and 300 Vrms for hands-free use. Supplied as a package of ten red test clips.

Pomona Model 4555-0 is a do-it-yourself minigrabber test clip designed for hands-free electrical testing. It accepts wire diameters up to 0.144 in and uses a gold-plated beryllium copper contact with stainless steel spring. Supplied as a 10-piece black set.

IDEAL 85-346 Cat5e RJ45 Connector delivers reliable Ethernet cable termination for 24 AWG Cat5e cables, ideal for network installers using standard RJ45 crimp tools.

The Fluke AC285 SureGrip™ Alligator Clips include one red and one black large alligator clip with nickel-plated steel jaws. Designed with rubber overmolded SureGrip surfaces, they provide a stable, comfortable grip for electrical testing. Rated CAT IV 600 V, CAT III 1000 V, 10 A.

The Pomona 2708 Test Lead Holder is designed to organize and support wires up to 0.450 inch (11.43 mm) in diameter. It accepts RG 213 and RG 214 cable types and provides a structured method for managing test lead routing. Overall dimensions are 16.73 × 3.54 × 1.3 inches with a listed weight of 0.65 lb.

AEMC 2129.72 Kelvin Lead Set provides 25 ft Kelvin leads with 200A Hippo clamps for use with AEMC Model 6292 low-resistance testing applications requiring secure current and potential connections.

Fluke TL224 SureGrip insulated test leads include one red and one black lead with safety-shrouded standard diameter banana plugs. The leads feature a right-angle connector on one end and a straight connector on the other, reinforced strain relief, and silicone-insulated wire designed to resist heat and cold.

The Pomona 6235 is an SMD microtip test probe set designed for probing surface-mount device contacts. It includes one red and one black 48-inch lead with curved, flexible stainless-steel needle tips to aid access to hard-to-reach areas while reducing risk of damage.

Pomona 5144-48-0 SMD Microtip Test Probe delivers precise probing of surface-mount contacts using a flexible stainless steel microtip and 48-inch lead with stacking banana plug for reliable electronics testing.

AEMC 2118.80 Kelvin Clips provide 20 ft test lead reach with 1-10A current capability for low-resistance measurement applications. Designed for use with compatible AEMC micro-ohmmeters.

Pomona 5953A adjustable tip test probe set includes one red and one black probe with retractable stainless steel needle tips adjustable from 0 to 3 inches. Designed with shrouded banana plugs and silicone-insulated leads, the set is rated CAT II 600 V and supports up to 3 A.

HARTING 09150006206 silver-plated Han D female crimp contact with AWG 14 capability delivers reliable 10 A performance and low ≤3 mΩ resistance for industrial connector applications.

AEMC 2118.70 Kelvin Clips provide 20 ft color-coded 10A Hippo test leads with spade lug terminations for compatible micro-ohmmeter connections.

AEMC 2118.79 Kelvin Clips deliver 10 ft 1-10A low-resistance test lead connectivity for compatible AEMC micro-ohmmeters.

AEMC 2118.74 Kelvin Probes deliver 20 ft reach, 1A spring-loaded contact, and 4 mm banana plug termination for micro-ohmmeter resistance testing.

The AEMC 2129.87 Kelvin Lead Set provides 50 ft color-coded Kelvin connections with 3 in C-clamps for low-resistance measurement applications using compatible AEMC 6290 and 6292 micro-ohmmeters.