Search results for: 'margin'

INNO Instrument OLL-500-652D-SC-APC OTDR launch fiber cable provides a 500 m singlemode buffer between an OTDR and the fiber under test. Using G.652D 9/125 µm fiber with SC/APC connectors on both ends, it supports near-end connector characterization and reveal events that may be obscured during OTDR trace acquisition.

The INNO Instrument FL-300-SC-APC is a 300 m Singlemode launch fiber reel designed for Optical Time Domain Reflectometer (OTDR) testing. It provides a controlled fiber length between the OTDR and the link under test, enabling measurement of the first connector in a fiber span. The reel format protects the fiber during storage and field deployment.

The INNO Instrument FL-100-SC-APC Singlemode OTDR Launch Fiber Reel is a 100 m fiber launch cable designed for optical time domain reflectometer testing. It provides a controlled fiber segment that allows OTDR measurements to stabilize before the first connection in a fiber link.

The INNO Instrument FL-100-SC-UPC is a 100 m singlemode OTDR launch fiber reel designed for fiber optic testing and link characterization. Featuring SC/UPC connectors on both ends, this launch cable acts as a pulse suppressor and delay line that enables Optical Time-Domain Reflectometers (OTDR) to measure insertion loss.

The INNO Instrument SC-SM-UPC-30S is a 10-pack of SC single-mode UPC splice-on connectors designed for 3.0mm jacketed fiber. Using fusion splice termination, these short boot SOC connectors provide stable optical performance without field polishing or index-matching gels.

The INNO Instrument SC-SM-APC-30 is a 10-pack of SC-type single-mode splice-on connectors designed for 3.0mm fiber cables. Featuring APC polish and pre-polished factory ferrules, these connectors support fusion splice termination with low insertion loss and high return loss performance.

The INNO Instrument SC-SM-UPC-09 is a 10-pack of single-mode SC/UPC splice-on connectors for 900µm fiber. Designed for fusion splicer termination, these connectors eliminate polishing, adhesives, and mechanical splicing. With typical ≤0.2 dB insertion loss and ≥55 dB return loss, they support G.652D and G.657A2 fiber types.

Rugged waterproof hard case in a 1550-class size with egg-crate lid foam, customizable pluck-foam base, pressure valve, reinforced hasps and dual latches for protecting tools, meters, cameras and electronics.

Olympus SA32-0L standard PAUT wedge for 0° longitudinal wave normal scan, designed for A32 footprint 32-element probes and general weld or component inspection requiring a straight-beam configuration.

Easy-Laser Case 3 shim kit with Types A/B/C/D, 0.05–2.00 mm stainless steel shims, permanently marked and burr-free. Foam-organized case for precise machine alignment setups.

Used Waygate 57K0201P1 45° shear wave angle beam wedge designed for 0.50" ultrasonic transducers. Optimized for carbon steel inspections using Accupath series transducers. Fully tested, certified, and ready for immediate use.

Eaton DILM9-10 / XTCE009B10T 24V 50/60Hz 3-pole motor contactor with 9A AC-3 rating, 4 kW capacity, 1NO auxiliary contact, and screw terminals for dependable control of pumps, fans, conveyors, and OEM panels.

The INNO Instrument FH Series Ribbon Fiber Holders are detachable accessories designed for use with INNO fusion splicers such as the View4M and View12R. These holders secure and align ribbon fibers during preparation and splicing, supporting configurations from 2-fiber to 12-fiber ribbons with 250µm coatings.

Upgrade your fiber testing with the Viavi FIT-82P01-PRO OLP-82P SM/MM Optical Power Meter & Fiber Inspection Kit! Get fast, accurate results with integrated inspection and automated pass/fail analysis-perfect for any network professional.Order now and streamline your fiber inspections!

INNO Instrument SCTX1000 is a 1000A AC/DC pass-through current sensor with 30.9 mm aperture, DB9 connection, DC to 300 kHz bandwidth, and ±15V to ±24V supply requirement.

INNO Instrument SCTX600 current sensor for 0 to 600A DC and 600Apeak AC measurement, with Ø30.9 mm aperture, DB9 connector, and ±15V to ±24V supply requirement.

INNO Instrument SCTH200 pass-through current sensor with 0–200A DC range, 200A peak AC, DC to 500kHz bandwidth, DB9 connector, and Φ28mm aperture.

INNO Instrument SPA3000 digital power meter with 3 power channels, up to 1000 V measurement, DC to 100 kHz bandwidth, and 4-item LED display for voltage, current, and power measurement.